[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <64898745.5d0a0220.546a.a6f1@mx.google.com>
Date: Wed, 14 Jun 2023 04:16:08 +0200
From: Christian Marangi <ansuelsmth@...il.com>
To: Jose Abreu <Jose.Abreu@...opsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@...com>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Russell King <linux@...linux.org.uk>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"linux-stm32@...md-mailman.stormreply.com" <linux-stm32@...md-mailman.stormreply.com>,
"linux-arm-kernel@...ts.infradead.org" <linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [net-next PATCH v5 4/5] net: ethernet: stmicro: stmmac: generate
stmmac dma conf before open
On Wed, Jun 14, 2023 at 07:15:03AM +0000, Jose Abreu wrote:
> Hi Christian,
>
> From: Christian Marangi <ansuelsmth@...il.com>
> Date: Sat, Jul 23, 2022 at 15:29:32
>
> > +static int __stmmac_open(struct net_device *dev,
> > + struct stmmac_dma_conf *dma_conf)
> > {
> > struct stmmac_priv *priv = netdev_priv(dev);
> > int mode = priv->plat->phy_interface;
> > - int bfsize = 0;
> > u32 chan;
> > int ret;
> >
> > @@ -3657,45 +3794,10 @@ static int stmmac_open(struct net_device *dev)
> > memset(&priv->xstats, 0, sizeof(struct stmmac_extra_stats));
> > priv->xstats.threshold = tc;
> >
> > - bfsize = stmmac_set_16kib_bfsize(priv, dev->mtu);
> > - if (bfsize < 0)
> > - bfsize = 0;
> > -
> > - if (bfsize < BUF_SIZE_16KiB)
> > - bfsize = stmmac_set_bfsize(dev->mtu, priv->dma_conf.dma_buf_sz);
> > -
> > - priv->dma_conf.dma_buf_sz = bfsize;
> > - buf_sz = bfsize;
> > -
> > priv->rx_copybreak = STMMAC_RX_COPYBREAK;
> >
> > - if (!priv->dma_conf.dma_tx_size)
> > - priv->dma_conf.dma_tx_size = DMA_DEFAULT_TX_SIZE;
> > - if (!priv->dma_conf.dma_rx_size)
> > - priv->dma_conf.dma_rx_size = DMA_DEFAULT_RX_SIZE;
> > -
> > - /* Earlier check for TBS */
> > - for (chan = 0; chan < priv->plat->tx_queues_to_use; chan++) {
> > - struct stmmac_tx_queue *tx_q = &priv->dma_conf.tx_queue[chan];
> > - int tbs_en = priv->plat->tx_queues_cfg[chan].tbs_en;
> > -
> > - /* Setup per-TXQ tbs flag before TX descriptor alloc */
> > - tx_q->tbs |= tbs_en ? STMMAC_TBS_AVAIL : 0;
> > - }
> > -
> > - ret = alloc_dma_desc_resources(priv);
> > - if (ret < 0) {
> > - netdev_err(priv->dev, "%s: DMA descriptors allocation failed\n",
> > - __func__);
> > - goto dma_desc_error;
> > - }
> > -
> > - ret = init_dma_desc_rings(dev, GFP_KERNEL);
> > - if (ret < 0) {
> > - netdev_err(priv->dev, "%s: DMA descriptors initialization failed\n",
> > - __func__);
> > - goto init_error;
> > - }
> > + buf_sz = dma_conf->dma_buf_sz;
> > + memcpy(&priv->dma_conf, dma_conf, sizeof(*dma_conf));
>
> This memcpy() needs to be the first thing to be done on __stmmac_open(), otherwise
> you'll leak the dma_conf when stmmac_init_phy() fails.
>
I'm not following the meaning of leak here. If it's intended as a memory
leak then dma_conf is correctly freed in the 2 user of __stmmac_open.
stmmac_init_phy also doesn't seems to use dma_conf. Am I missing
something here?
> Can you please send follow-up patch?
Happy to push a follow-up patch with these concern cleared!
>
> Thanks,
> Jose
--
Ansuel
Powered by blists - more mailing lists