[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID:
<DM4PR12MB508882D5BE351BD756A7A9A4D35AA@DM4PR12MB5088.namprd12.prod.outlook.com>
Date: Wed, 14 Jun 2023 07:15:03 +0000
From: Jose Abreu <Jose.Abreu@...opsys.com>
To: Christian Marangi <ansuelsmth@...il.com>,
Giuseppe Cavallaro
<peppe.cavallaro@...com>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Maxime
Coquelin <mcoquelin.stm32@...il.com>,
Russell King <linux@...linux.org.uk>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"linux-stm32@...md-mailman.stormreply.com"
<linux-stm32@...md-mailman.stormreply.com>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org"
<linux-kernel@...r.kernel.org>
CC: Jose Abreu <Jose.Abreu@...opsys.com>
Subject: RE: [net-next PATCH v5 4/5] net: ethernet: stmicro: stmmac: generate
stmmac dma conf before open
Hi Christian,
From: Christian Marangi <ansuelsmth@...il.com>
Date: Sat, Jul 23, 2022 at 15:29:32
> +static int __stmmac_open(struct net_device *dev,
> + struct stmmac_dma_conf *dma_conf)
> {
> struct stmmac_priv *priv = netdev_priv(dev);
> int mode = priv->plat->phy_interface;
> - int bfsize = 0;
> u32 chan;
> int ret;
>
> @@ -3657,45 +3794,10 @@ static int stmmac_open(struct net_device *dev)
> memset(&priv->xstats, 0, sizeof(struct stmmac_extra_stats));
> priv->xstats.threshold = tc;
>
> - bfsize = stmmac_set_16kib_bfsize(priv, dev->mtu);
> - if (bfsize < 0)
> - bfsize = 0;
> -
> - if (bfsize < BUF_SIZE_16KiB)
> - bfsize = stmmac_set_bfsize(dev->mtu, priv->dma_conf.dma_buf_sz);
> -
> - priv->dma_conf.dma_buf_sz = bfsize;
> - buf_sz = bfsize;
> -
> priv->rx_copybreak = STMMAC_RX_COPYBREAK;
>
> - if (!priv->dma_conf.dma_tx_size)
> - priv->dma_conf.dma_tx_size = DMA_DEFAULT_TX_SIZE;
> - if (!priv->dma_conf.dma_rx_size)
> - priv->dma_conf.dma_rx_size = DMA_DEFAULT_RX_SIZE;
> -
> - /* Earlier check for TBS */
> - for (chan = 0; chan < priv->plat->tx_queues_to_use; chan++) {
> - struct stmmac_tx_queue *tx_q = &priv->dma_conf.tx_queue[chan];
> - int tbs_en = priv->plat->tx_queues_cfg[chan].tbs_en;
> -
> - /* Setup per-TXQ tbs flag before TX descriptor alloc */
> - tx_q->tbs |= tbs_en ? STMMAC_TBS_AVAIL : 0;
> - }
> -
> - ret = alloc_dma_desc_resources(priv);
> - if (ret < 0) {
> - netdev_err(priv->dev, "%s: DMA descriptors allocation failed\n",
> - __func__);
> - goto dma_desc_error;
> - }
> -
> - ret = init_dma_desc_rings(dev, GFP_KERNEL);
> - if (ret < 0) {
> - netdev_err(priv->dev, "%s: DMA descriptors initialization failed\n",
> - __func__);
> - goto init_error;
> - }
> + buf_sz = dma_conf->dma_buf_sz;
> + memcpy(&priv->dma_conf, dma_conf, sizeof(*dma_conf));
This memcpy() needs to be the first thing to be done on __stmmac_open(), otherwise
you'll leak the dma_conf when stmmac_init_phy() fails.
Can you please send follow-up patch?
Thanks,
Jose
Powered by blists - more mailing lists