[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ZJReJ2yxqKGQx1BU@corigine.com>
Date: Thu, 22 Jun 2023 16:43:51 +0200
From: Simon Horman <simon.horman@...igine.com>
To: Choong Yong Liang <yong.liang.choong@...ux.intel.com>
Cc: Rajneesh Bhardwaj <irenic.rajneesh@...il.com>,
David E Box <david.e.box@...el.com>,
Hans de Goede <hdegoede@...hat.com>,
Mark Gross <markgross@...nel.org>,
Jose Abreu <Jose.Abreu@...opsys.com>, Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
"David S . Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Marek BehĂșn <kabel@...nel.org>,
Jean Delvare <jdelvare@...e.com>,
Guenter Roeck <linux@...ck-us.net>,
Giuseppe Cavallaro <peppe.cavallaro@...com>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Jose Abreu <joabreu@...opsys.com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Richard Cochran <richardcochran@...il.com>,
Philipp Zabel <p.zabel@...gutronix.de>,
Alexei Starovoitov <ast@...nel.org>,
Daniel Borkmann <daniel@...earbox.net>,
Jesper Dangaard Brouer <hawk@...nel.org>,
John Fastabend <john.fastabend@...il.com>,
Wong Vee Khee <veekhee@...le.com>,
Jon Hunter <jonathanh@...dia.com>,
Jesse Brandeburg <jesse.brandeburg@...el.com>,
Revanth Kumar Uppala <ruppala@...dia.com>,
Shenwei Wang <shenwei.wang@....com>,
Andrey Konovalov <andrey.konovalov@...aro.org>,
Jochen Henneberg <jh@...neberg-systemdesign.com>,
netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-stm32@...md-mailman.stormreply.com,
linux-arm-kernel@...ts.infradead.org,
platform-driver-x86@...r.kernel.org, linux-hwmon@...r.kernel.org,
bpf@...r.kernel.org, Voon Wei Feng <weifeng.voon@...el.com>,
Tan@....codeaurora.org, Tee Min <tee.min.tan@...ux.intel.com>,
Michael Sit Wei Hong <michael.wei.hong.sit@...el.com>,
Lai Peter Jun Ann <jun.ann.lai@...el.com>
Subject: Re: [PATCH net-next 3/6] net: phy: update in-band AN mode when
changing interface by PHY driver
On Thu, Jun 22, 2023 at 12:19:02PM +0800, Choong Yong Liang wrote:
> From: "Tan, Tee Min" <tee.min.tan@...ux.intel.com>
>
> Add cur_link_an_mode into phy_device struct for PHY drivers to
> communicate the in-band AN mode setting with phylink framework.
>
> As there is a mechanism in PHY drivers to switch the PHY interface
> between SGMII and 2500BaseX according to link speed. In this case,
> the in-band AN mode should be switching based on the PHY interface
> as well, if the PHY interface has been changed/updated by PHY driver.
>
> For e.g., disable in-band AN in 2500BaseX mode, or enable in-band AN
> back for SGMII mode (10/100/1000Mbps).
>
> Signed-off-by: Tan, Tee Min <tee.min.tan@...ux.intel.com>
> Signed-off-by: Choong Yong Liang <yong.liang.choong@...ux.intel.com>
...
> diff --git a/include/linux/phy.h b/include/linux/phy.h
> index 11c1e91563d4..c685b526e307 100644
> --- a/include/linux/phy.h
> +++ b/include/linux/phy.h
> @@ -756,6 +756,8 @@ struct phy_device {
> /* MACsec management functions */
> const struct macsec_ops *macsec_ops;
> #endif
> + /* For communicate the AN mode setting with phylink framework. */
> + u8 cur_link_an_mode;
> };
Hi Choong Yong Liang,
Please consider adding cur_link_an_mode to the kernel doc
for struct phy_device - which is above the definition of struct phy_device.
Powered by blists - more mailing lists