netdev - [PATCH] can: mcp251xfd: Always stop on BUS_OFF and call netif_stop

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20230711152647.28673-1-mike.looijmans@topic.nl>
Date: Tue, 11 Jul 2023 17:26:47 +0200
From: Mike Looijmans <mike.looijmans@...ic.nl>
To: linux-can@...r.kernel.org
CC: Mike Looijmans <mike.looijmans@...ic.nl>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>,
	Manivannan Sadhasivam <mani@...nel.org>,
	Marc Kleine-Budde <mkl@...gutronix.de>,
	Paolo Abeni <pabeni@...hat.com>,
	Thomas Kopp <thomas.kopp@...rochip.com>,
	Wolfgang Grandegger <wg@...ndegger.com>,
	linux-kernel@...r.kernel.org,
	netdev@...r.kernel.org
Subject: [PATCH] can: mcp251xfd: Always stop on BUS_OFF and call netif_stop_queue

When there's an error attempting to store the BER counter, don't abort
but continue shutting down the chip as required.

After disabling communications, also stop the TX queue with a call to
netif_stop_queue. When the interface restarts, mcp251xfd_set_mode will
call netif_wake_queue and resume.

This fixes a hangup in either send() or poll() from userspace. To
reproduce: I ran "cansequence can0 -p" to flood the system with packets.
While running that, I shorted the CAN signals, causing a bus error.
Usually communications would resume after the CAN bus restarted, but
sometimes the system got stuck and refused to send any more packets.
The sending process would be in either poll() or send(), waiting for
the queue to resume. To "unstuck" the process from send() it was
sufficient to send any packet on the can interface from another
process. To get it out of the poll() hang, only bringing the can
interface down (and up) would work.

After adding the netif_stop_queue call, I was unable to reproduce the
problem.

Signed-off-by: Mike Looijmans <mike.looijmans@...ic.nl>

---

 drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
index 68df6d4641b5..854e0644764c 100644
--- a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
+++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
@@ -1084,10 +1084,11 @@ static int mcp251xfd_handle_cerrif(struct mcp251xfd_priv *priv)
 		 */
 		err = __mcp251xfd_get_berr_counter(priv->ndev, &priv->bec);
 		if (err)
-			return err;
+			netdev_err(priv->ndev, "Failed to store BER counter\n");

 		mcp251xfd_chip_stop(priv, CAN_STATE_BUS_OFF);
 		can_bus_off(priv->ndev);
+		netif_stop_queue(priv->ndev);
 	}

 	if (!skb)
-- 
2.17.1

Met vriendelijke groet / kind regards,

Mike Looijmans
System Expert

TOPIC Embedded Products B.V.
Materiaalweg 4, 5681 RJ Best
The Netherlands

T: +31 (0) 499 33 69 69
E: mike.looijmans@...icproducts.com
W: www.topic.nl

Please consider the environment before printing this e-mail