| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230711062623.3058-1-jiawenwu@trustnetic.com>
Date: Tue, 11 Jul 2023 14:26:23 +0800
From: Jiawen Wu <jiawenwu@...stnetic.com>
To: netdev@...r.kernel.org
Cc: mengyuanlou@...-swift.com,
Jiawen Wu <jiawenwu@...stnetic.com>
Subject: [PATCH net-next v3] net: txgbe: change LAN reset mode
The old way to do LAN reset is sending reset command to firmware. Once
firmware performs reset, it reconfigures what it needs.
In the new firmware versions, veto bit is introduced for NCSI/LLDP to
block PHY domain in LAN reset. At this point, writing register of LAN
reset directly makes the same effect as the old way. And it does not
reset MNG domain, so that veto bit does not change.
And this change is compatible with old firmware versions, since veto
bit was never used.
Fixes: b08012568ebb ("net: txgbe: Reset hardware")
Signed-off-by: Jiawen Wu <jiawenwu@...stnetic.com>
---
v2 -> v3:
- post to net-next
v1 -> v2:
- detail commit log
---
drivers/net/ethernet/wangxun/libwx/wx_hw.c | 65 -------------------
drivers/net/ethernet/wangxun/libwx/wx_hw.h | 1 -
drivers/net/ethernet/wangxun/txgbe/txgbe_hw.c | 8 +--
3 files changed, 4 insertions(+), 70 deletions(-)
diff --git a/drivers/net/ethernet/wangxun/libwx/wx_hw.c b/drivers/net/ethernet/wangxun/libwx/wx_hw.c
index 39a9aeee7aab..8f5bba0778c6 100644
--- a/drivers/net/ethernet/wangxun/libwx/wx_hw.c
+++ b/drivers/net/ethernet/wangxun/libwx/wx_hw.c
@@ -431,71 +431,6 @@ int wx_read_ee_hostif_buffer(struct wx *wx,
}
EXPORT_SYMBOL(wx_read_ee_hostif_buffer);
-/**
- * wx_calculate_checksum - Calculate checksum for buffer
- * @buffer: pointer to EEPROM
- * @length: size of EEPROM to calculate a checksum for
- * Calculates the checksum for some buffer on a specified length. The
- * checksum calculated is returned.
- **/
-static u8 wx_calculate_checksum(u8 *buffer, u32 length)
-{
- u8 sum = 0;
- u32 i;
-
- if (!buffer)
- return 0;
-
- for (i = 0; i < length; i++)
- sum += buffer[i];
-
- return (u8)(0 - sum);
-}
-
-/**
- * wx_reset_hostif - send reset cmd to fw
- * @wx: pointer to hardware structure
- *
- * Sends reset cmd to firmware through the manageability
- * block.
- **/
-int wx_reset_hostif(struct wx *wx)
-{
- struct wx_hic_reset reset_cmd;
- int ret_val = 0;
- int i;
-
- reset_cmd.hdr.cmd = FW_RESET_CMD;
- reset_cmd.hdr.buf_len = FW_RESET_LEN;
- reset_cmd.hdr.cmd_or_resp.cmd_resv = FW_CEM_CMD_RESERVED;
- reset_cmd.lan_id = wx->bus.func;
- reset_cmd.reset_type = (u16)wx->reset_type;
- reset_cmd.hdr.checksum = 0;
- reset_cmd.hdr.checksum = wx_calculate_checksum((u8 *)&reset_cmd,
- (FW_CEM_HDR_LEN +
- reset_cmd.hdr.buf_len));
-
- for (i = 0; i <= FW_CEM_MAX_RETRIES; i++) {
- ret_val = wx_host_interface_command(wx, (u32 *)&reset_cmd,
- sizeof(reset_cmd),
- WX_HI_COMMAND_TIMEOUT,
- true);
- if (ret_val != 0)
- continue;
-
- if (reset_cmd.hdr.cmd_or_resp.ret_status ==
- FW_CEM_RESP_STATUS_SUCCESS)
- ret_val = 0;
- else
- ret_val = -EFAULT;
-
- break;
- }
-
- return ret_val;
-}
-EXPORT_SYMBOL(wx_reset_hostif);
-
/**
* wx_init_eeprom_params - Initialize EEPROM params
* @wx: pointer to hardware structure
diff --git a/drivers/net/ethernet/wangxun/libwx/wx_hw.h b/drivers/net/ethernet/wangxun/libwx/wx_hw.h
index 1f93ca32c921..0c4756e6ee06 100644
--- a/drivers/net/ethernet/wangxun/libwx/wx_hw.h
+++ b/drivers/net/ethernet/wangxun/libwx/wx_hw.h
@@ -14,7 +14,6 @@ int wx_host_interface_command(struct wx *wx, u32 *buffer,
int wx_read_ee_hostif(struct wx *wx, u16 offset, u16 *data);
int wx_read_ee_hostif_buffer(struct wx *wx,
u16 offset, u16 words, u16 *data);
-int wx_reset_hostif(struct wx *wx);
void wx_init_eeprom_params(struct wx *wx);
void wx_get_mac_addr(struct wx *wx, u8 *mac_addr);
void wx_init_rx_addrs(struct wx *wx);
diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_hw.c b/drivers/net/ethernet/wangxun/txgbe/txgbe_hw.c
index 0772eb14eabf..6e130d1f7a7b 100644
--- a/drivers/net/ethernet/wangxun/txgbe/txgbe_hw.c
+++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_hw.c
@@ -257,16 +257,16 @@ static void txgbe_reset_misc(struct wx *wx)
int txgbe_reset_hw(struct wx *wx)
{
int status;
+ u32 val;
/* Call adapter stop to disable tx/rx and clear interrupts */
status = wx_stop_adapter(wx);
if (status != 0)
return status;
- if (!(((wx->subsystem_device_id & WX_NCSI_MASK) == WX_NCSI_SUP) ||
- ((wx->subsystem_device_id & WX_WOL_MASK) == WX_WOL_SUP)))
- wx_reset_hostif(wx);
-
+ val = WX_MIS_RST_LAN_RST(wx->bus.func);
+ wr32(wx, WX_MIS_RST, val | rd32(wx, WX_MIS_RST));
+ WX_WRITE_FLUSH(wx);
usleep_range(10, 100);
status = wx_check_flash_load(wx, TXGBE_SPI_ILDR_STATUS_LAN_SW_RST(wx->bus.func));
--
2.27.0
Powered by blists - more mailing lists