[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <006f9599-6aa4-52ac-068a-831893ec6bf8@linaro.org>
Date: Wed, 12 Jul 2023 22:36:35 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Vesa Jääskeläinen <vesa.jaaskelainen@...sala.com>
Cc: Wei Fang <wei.fang@....com>, Shenwei Wang <shenwei.wang@....com>,
Clark Wang <xiaoning.wang@....com>, NXP Linux Team <linux-imx@....com>,
"David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>, Russell King <linux@...linux.org.uk>,
Shawn Guo <shawnguo@...nel.org>, Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>, netdev@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH 1/2] dt-bindings: net: fsl,fec: Add TX clock controls
On 11/07/2023 17:08, Vesa Jääskeläinen wrote:
> With fsl,fec-tx-clock-output one can control if TX clock is routed outside
> of the chip.
>
> With fsl,fec-tx-clk-as-ref-clock one can select if external TX clock is as
> reference clock.
>
> Signed-off-by: Vesa Jääskeläinen <vesa.jaaskelainen@...sala.com>
> ---
> .../devicetree/bindings/net/fsl,fec.yaml | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/net/fsl,fec.yaml b/Documentation/devicetree/bindings/net/fsl,fec.yaml
> index b494e009326e..c09105878bc6 100644
> --- a/Documentation/devicetree/bindings/net/fsl,fec.yaml
> +++ b/Documentation/devicetree/bindings/net/fsl,fec.yaml
> @@ -166,6 +166,21 @@ properties:
> description:
> If present, indicates that the hardware supports waking up via magic packet.
>
> + fsl,fec-tx-clock-output:
> + $ref: /schemas/types.yaml#/definitions/flag
> + description:
> + If present, ENETx_TX_CLK output driver is enabled.
> + If not present, ENETx_TX_CLK output driver is disabled.
Here...
> +
> + fsl,fec-tx-clk-as-ref-clock:
> + $ref: /schemas/types.yaml#/definitions/flag
> + description:
> + If present, gets ENETx TX reference clk from the ENETx_TX_CLK pin. In
> + this use case, an external OSC provides the clock for both the external
> + PHY and the internal controller.
> + If not present, ENETx TX reference clock is driven by ref_enetpllx. This
> + clock is also output to pins via the IOMUX.ENET_REF_CLKx function.
and here:
In general, Common Clock Framework and its bindings should be used for
handling clock providers and consumers. Why it cannot be used for these
two cases?
Best regards,
Krzysztof
Powered by blists - more mailing lists