| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <b53786479b9b95ceffeffd4d04a27eeb6683262c.1689215889.git.chenfeiyang@loongson.cn>
Date: Thu, 13 Jul 2023 10:48:53 +0800
From: Feiyang Chen <chenfeiyang@...ngson.cn>
To: andrew@...n.ch,
hkallweit1@...il.com,
peppe.cavallaro@...com,
alexandre.torgue@...s.st.com,
joabreu@...opsys.com,
chenhuacai@...ngson.cn
Cc: Feiyang Chen <chenfeiyang@...ngson.cn>,
linux@...linux.org.uk,
dongbiao@...ngson.cn,
loongson-kernel@...ts.loongnix.cn,
netdev@...r.kernel.org,
loongarch@...ts.linux.dev,
chris.chenfeiyang@...il.com
Subject: [RFC PATCH 08/10] net: stmmac: dwmac-loongson: Add LS7A support
Current dwmac-loongson only support LS2K in the "probed with PCI and
configured with DT" manner. We add LS7A support on which the devices
are fully PCI (non-DT).
Signed-off-by: Huacai Chen <chenhuacai@...ngson.cn>
Signed-off-by: Feiyang Chen <chenfeiyang@...ngson.cn>
---
.../ethernet/stmicro/stmmac/dwmac-loongson.c | 135 +++++++++++-------
1 file changed, 82 insertions(+), 53 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
index a25c187d3185..dc0916f2e9b8 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
@@ -9,14 +9,22 @@
#include <linux/of_irq.h>
#include "stmmac.h"
-static int loongson_default_data(struct plat_stmmacenet_data *plat)
+struct stmmac_pci_info {
+ int (*setup)(struct pci_dev *pdev, struct plat_stmmacenet_data *plat);
+};
+
+static void common_default_data(struct pci_dev *pdev,
+ struct plat_stmmacenet_data *plat)
{
+ plat->bus_id = (pci_domain_nr(pdev->bus) << 16) | PCI_DEVID(pdev->bus->number, pdev->devfn);
+ plat->interface = PHY_INTERFACE_MODE_GMII;
+
plat->clk_csr = 2; /* clk_csr_i = 20-35MHz & MDC = clk_csr_i/16 */
plat->has_gmac = 1;
plat->force_sf_dma_mode = 1;
/* Set default value for multicast hash bins */
- plat->multicast_filter_bins = HASH_TABLE_SIZE;
+ plat->multicast_filter_bins = 256;
/* Set default value for unicast filter entries */
plat->unicast_filter_entries = 1;
@@ -35,31 +43,43 @@ static int loongson_default_data(struct plat_stmmacenet_data *plat)
/* Disable RX queues routing by default */
plat->rx_queues_cfg[0].pkt_route = 0x0;
- /* Default to phy auto-detection */
- plat->phy_addr = -1;
-
plat->dma_cfg->pbl = 32;
plat->dma_cfg->pblx8 = true;
- plat->multicast_filter_bins = 256;
+ plat->clk_ref_rate = 125000000;
+ plat->clk_ptp_rate = 125000000;
+
+ plat->has_lgmac = 1;
+}
+
+static int loongson_gmac_data(struct pci_dev *pdev,
+ struct plat_stmmacenet_data *plat)
+{
+ common_default_data(pdev, plat);
+
+ plat->mdio_bus_data->phy_mask = 0;
+
+ plat->phy_addr = -1;
+ plat->phy_interface = PHY_INTERFACE_MODE_RGMII_ID;
+
return 0;
}
-static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+static struct stmmac_pci_info loongson_gmac_pci_info = {
+ .setup = loongson_gmac_data,
+};
+
+static int loongson_dwmac_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
{
+ int ret, i, bus_id, phy_mode;
struct plat_stmmacenet_data *plat;
+ struct stmmac_pci_info *info;
struct stmmac_resources res;
struct device_node *np;
- int ret, i, phy_mode;
np = dev_of_node(&pdev->dev);
-
- if (!np) {
- pr_info("dwmac_loongson_pci: No OF node\n");
- return -ENODEV;
- }
-
- if (!of_device_is_compatible(np, "loongson, pci-gmac")) {
+ if (np && !of_device_is_compatible(np, "loongson, pci-gmac")) {
pr_info("dwmac_loongson_pci: Incompatible OF node\n");
return -ENODEV;
}
@@ -68,17 +88,14 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
if (!plat)
return -ENOMEM;
+ plat->mdio_bus_data = devm_kzalloc(&pdev->dev,
+ sizeof(*plat->mdio_bus_data), GFP_KERNEL);
+ if (!plat->mdio_bus_data)
+ return -ENOMEM;
+
plat->mdio_node = of_get_child_by_name(np, "mdio");
if (plat->mdio_node) {
dev_info(&pdev->dev, "Found MDIO subnode\n");
-
- plat->mdio_bus_data = devm_kzalloc(&pdev->dev,
- sizeof(*plat->mdio_bus_data),
- GFP_KERNEL);
- if (!plat->mdio_bus_data) {
- ret = -ENOMEM;
- goto err_put_node;
- }
plat->mdio_bus_data->needs_reset = true;
}
@@ -105,45 +122,55 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
break;
}
- plat->bus_id = of_alias_get_id(np, "ethernet");
- if (plat->bus_id < 0)
- plat->bus_id = pci_dev_id(pdev);
+ pci_set_master(pdev);
- phy_mode = device_get_phy_mode(&pdev->dev);
- if (phy_mode < 0) {
- dev_err(&pdev->dev, "phy_mode not found\n");
- ret = phy_mode;
+ info = (struct stmmac_pci_info *)id->driver_data;
+ ret = info->setup(pdev, plat);
+ if (ret)
goto err_disable_device;
- }
- plat->phy_interface = phy_mode;
- plat->interface = PHY_INTERFACE_MODE_GMII;
+ if (np) {
+ bus_id = of_alias_get_id(np, "ethernet");
+ if (bus_id >= 0)
+ plat->bus_id = bus_id;
- pci_set_master(pdev);
+ phy_mode = device_get_phy_mode(&pdev->dev);
+ if (phy_mode < 0) {
+ dev_err(&pdev->dev, "phy_mode not found\n");
+ ret = phy_mode;
+ goto err_disable_device;
+ }
+ plat->phy_interface = phy_mode;
+ }
- loongson_default_data(plat);
pci_enable_msi(pdev);
+
memset(&res, 0, sizeof(res));
res.addr = pcim_iomap_table(pdev)[0];
+ if (np) {
+ res.irq = of_irq_get_byname(np, "macirq");
+ if (res.irq < 0) {
+ dev_err(&pdev->dev, "IRQ macirq not found\n");
+ ret = -ENODEV;
+ goto err_disable_msi;
+ }
- res.irq = of_irq_get_byname(np, "macirq");
- if (res.irq < 0) {
- dev_err(&pdev->dev, "IRQ macirq not found\n");
- ret = -ENODEV;
- goto err_disable_msi;
- }
-
- res.wol_irq = of_irq_get_byname(np, "eth_wake_irq");
- if (res.wol_irq < 0) {
- dev_info(&pdev->dev, "IRQ eth_wake_irq not found, using macirq\n");
- res.wol_irq = res.irq;
- }
+ res.wol_irq = of_irq_get_byname(np, "eth_wake_irq");
+ if (res.wol_irq < 0) {
+ dev_info(&pdev->dev,
+ "IRQ eth_wake_irq not found, using macirq\n");
+ res.wol_irq = res.irq;
+ }
- res.lpi_irq = of_irq_get_byname(np, "eth_lpi");
- if (res.lpi_irq < 0) {
- dev_err(&pdev->dev, "IRQ eth_lpi not found\n");
- ret = -ENODEV;
- goto err_disable_msi;
+ res.lpi_irq = of_irq_get_byname(np, "eth_lpi");
+ if (res.lpi_irq < 0) {
+ dev_err(&pdev->dev, "IRQ eth_lpi not found\n");
+ ret = -ENODEV;
+ goto err_disable_msi;
+ }
+ } else {
+ res.irq = pdev->irq;
+ res.wol_irq = pdev->irq;
}
ret = stmmac_dvr_probe(&pdev->dev, plat, &res);
@@ -219,8 +246,10 @@ static int __maybe_unused loongson_dwmac_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(loongson_dwmac_pm_ops, loongson_dwmac_suspend,
loongson_dwmac_resume);
+#define PCI_DEVICE_ID_LOONGSON_GMAC 0x7a03
+
static const struct pci_device_id loongson_dwmac_id_table[] = {
- { PCI_VDEVICE(LOONGSON, 0x7a03) },
+ { PCI_DEVICE_DATA(LOONGSON, GMAC, &loongson_gmac_pci_info) },
{}
};
MODULE_DEVICE_TABLE(pci, loongson_dwmac_id_table);
--
2.39.3
Powered by blists - more mailing lists