netdev - [RFC PATCH 10/10] net: stmmac: dwmac-loongson: Add GNET support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <98b53d15bb983c309f79acf9619b88ea4fbb8f14.1689215889.git.chenfeiyang@loongson.cn>
Date: Thu, 13 Jul 2023 10:49:38 +0800
From: Feiyang Chen <chenfeiyang@...ngson.cn>
To: andrew@...n.ch,
	hkallweit1@...il.com,
	peppe.cavallaro@...com,
	alexandre.torgue@...s.st.com,
	joabreu@...opsys.com,
	chenhuacai@...ngson.cn
Cc: Feiyang Chen <chenfeiyang@...ngson.cn>,
	linux@...linux.org.uk,
	dongbiao@...ngson.cn,
	loongson-kernel@...ts.loongnix.cn,
	netdev@...r.kernel.org,
	loongarch@...ts.linux.dev,
	chris.chenfeiyang@...il.com
Subject: [RFC PATCH 10/10] net: stmmac: dwmac-loongson: Add GNET support

Add GNET support. Use the fix_mac_speed() callback to workaround
issues with the Loongson PHY.

Signed-off-by: Feiyang Chen <chenfeiyang@...ngson.cn>
---
 drivers/net/ethernet/stmicro/stmmac/Kconfig   |  1 +
 .../ethernet/stmicro/stmmac/dwmac-loongson.c  | 34 +++++++++++++++++++
 2 files changed, 35 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index 5f5a997f21f3..8c25d5616941 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -279,6 +279,7 @@ config DWMAC_LOONGSON
 	default MACH_LOONGSON64
 	depends on STMMAC_ETH && PCI
 	depends on COMMON_CLK
+	select LOONGSON_PHY
 	help
 	  This selects the LOONGSON PCI bus support for the stmmac driver,
 	  Support for ethernet controller on Loongson-2K1000 SoC and LS7A1000 bridge.
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
index 3732f90a79c7..c840d9d1d72a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
@@ -69,6 +69,38 @@ static struct stmmac_pci_info loongson_gmac_pci_info = {
 	.setup = loongson_gmac_data,
 };
 
+static void loongson_gnet_fix_speed(void *priv, unsigned int speed)
+{
+	struct net_device *ndev = (struct net_device *)(*(unsigned long *)priv);
+	struct stmmac_priv *ptr = netdev_priv(ndev);
+
+	if (speed == SPEED_1000)
+		if (readl(ptr->ioaddr + MAC_CTRL_REG) & (1 << 15) /* PS */)
+			phy_restart_aneg(ndev->phydev);
+}
+
+static int loongson_gnet_data(struct pci_dev *pdev,
+			      struct plat_stmmacenet_data *plat)
+{
+	common_default_data(pdev, plat);
+
+	plat->mdio_bus_data->phy_mask = 0xfffffffb;
+
+	plat->phy_addr = 2;
+	plat->phy_interface = PHY_INTERFACE_MODE_GMII;
+
+	plat->fix_mac_speed = loongson_gnet_fix_speed;
+
+	/* Get netdev pointer address */
+	plat->bsp_priv = &(pdev->dev.driver_data);
+
+	return 0;
+}
+
+static struct stmmac_pci_info loongson_gnet_pci_info = {
+	.setup = loongson_gnet_data,
+};
+
 static int loongson_dwmac_probe(struct pci_dev *pdev,
 				const struct pci_device_id *id)
 {
@@ -296,9 +328,11 @@ static SIMPLE_DEV_PM_OPS(loongson_dwmac_pm_ops, loongson_dwmac_suspend,
 			 loongson_dwmac_resume);
 
 #define PCI_DEVICE_ID_LOONGSON_GMAC	0x7a03
+#define PCI_DEVICE_ID_LOONGSON_GNET	0x7a13
 
 static const struct pci_device_id loongson_dwmac_id_table[] = {
 	{ PCI_DEVICE_DATA(LOONGSON, GMAC, &loongson_gmac_pci_info) },
+	{ PCI_DEVICE_DATA(LOONGSON, GNET, &loongson_gnet_pci_info) },
 	{}
 };
 MODULE_DEVICE_TABLE(pci, loongson_dwmac_id_table);
-- 
2.39.3