[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <95ecef91f1b9446f8a69280d69422b40@realtek.com>
Date: Wed, 26 Jul 2023 09:50:01 +0000
From: Hayes Wang <hayeswang@...ltek.com>
To: Andrew Lunn <andrew@...n.ch>
CC: "kuba@...nel.org" <kuba@...nel.org>,
"davem@...emloft.net"
<davem@...emloft.net>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
nic_swsd <nic_swsd@...ltek.com>,
"linux-kernel@...r.kernel.org"
<linux-kernel@...r.kernel.org>,
"linux-usb@...r.kernel.org"
<linux-usb@...r.kernel.org>
Subject: RE: [PATCH net-next v2 1/2] r8152: adjust generic_ocp_write function
Andrew Lunn <andrew@...n.ch>
> Sent: Wednesday, July 26, 2023 4:37 PM
[...]
> How often is byte_en 0xff? Do you have some benchmark numbers to show
> it is worth the complexity?
It is usually used for writing firmware.
The firmware contains several blocks of continuous registers.
I think it is worth, even this only saves several numbers of control transfer.
This patch could replace 3 control transfers with 1 control transfer.
If you could do it with one step, why do you use 3 steps?
Besides, a control transfer is a complex process.
I think this could reduce the loading of both software and hardware.
Best Regards,
Hayes
Powered by blists - more mailing lists