[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230727110948.7926a532@bootlin.com>
Date: Thu, 27 Jul 2023 11:09:48 +0200
From: Herve Codina <herve.codina@...tlin.com>
To: Conor Dooley <conor@...nel.org>
Cc: "David S. Miller" <davem@...emloft.net>, Eric Dumazet
<edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>, Paolo Abeni
<pabeni@...hat.com>, Andrew Lunn <andrew@...n.ch>, Rob Herring
<robh+dt@...nel.org>, Krzysztof Kozlowski
<krzysztof.kozlowski+dt@...aro.org>, Conor Dooley <conor+dt@...nel.org>,
Lee Jones <lee@...nel.org>, Linus Walleij <linus.walleij@...aro.org>, Qiang
Zhao <qiang.zhao@....com>, Li Yang <leoyang.li@....com>, Liam Girdwood
<lgirdwood@...il.com>, Mark Brown <broonie@...nel.org>, Jaroslav Kysela
<perex@...ex.cz>, Takashi Iwai <tiwai@...e.com>, Shengjiu Wang
<shengjiu.wang@...il.com>, Xiubo Li <Xiubo.Lee@...il.com>, Fabio Estevam
<festevam@...il.com>, Nicolin Chen <nicoleotsuka@...il.com>, Christophe
Leroy <christophe.leroy@...roup.eu>, Randy Dunlap <rdunlap@...radead.org>,
netdev@...r.kernel.org, linuxppc-dev@...ts.ozlabs.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-gpio@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
alsa-devel@...a-project.org, Thomas Petazzoni
<thomas.petazzoni@...tlin.com>
Subject: Re: [PATCH v2 05/28] dt-bindings: net: Add support for QMC HDLC
Hi Conor,
On Thu, 27 Jul 2023 09:19:59 +0100
Conor Dooley <conor@...nel.org> wrote:
> On Wed, Jul 26, 2023 at 05:02:01PM +0200, Herve Codina wrote:
> > The QMC (QUICC mutichannel controller) is a controller present in some
> > PowerQUICC SoC such as MPC885.
> > The QMC HDLC uses the QMC controller to transfer HDLC data.
> >
> > Signed-off-by: Herve Codina <herve.codina@...tlin.com>
> > ---
> > .../devicetree/bindings/net/fsl,qmc-hdlc.yaml | 41 +++++++++++++++++++
> > 1 file changed, 41 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/net/fsl,qmc-hdlc.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/net/fsl,qmc-hdlc.yaml b/Documentation/devicetree/bindings/net/fsl,qmc-hdlc.yaml
> > new file mode 100644
> > index 000000000000..8bb6f34602d9
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/net/fsl,qmc-hdlc.yaml
> > @@ -0,0 +1,41 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/net/fsl,qmc-hdlc.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: QMC HDLC
>
> "QMC HDLC" seems excessively terse.
The name was based on the fsl,qmc-audio.yaml already present upstream.
https://elixir.bootlin.com/linux/v6.4/source/Documentation/devicetree/bindings/sound/fsl,qmc-audio.yaml
If needed, I can change to:
title: QMC (QUICC Multichannel Controller) HDLC
Let me known if it is better to you.
>
> > +
> > +maintainers:
> > + - Herve Codina <herve.codina@...tlin.com>
> > +
> > +description: |
> > + The QMC HDLC uses a QMC (QUICC Multichannel Controller) channel to transfer
> > + HDLC data.
> > +
> > +properties:
> > + compatible:
> > + const: fsl,qmc-hdlc
> > +
> > + fsl,qmc-chan:
>
> Perhaps I am just showing my lack of knowledge in this area, but what is
> fsl specific about wanting a reference to the channel of a "QMC"?
> Is this something that hardware from other manufacturers would not also
> want to do?
The QMC and the QMC channel are something specific to the SoC. This IP is only
available on some Freescale/NXP SoCs.
When I upstreamed the 'fsl,qmc-audio.yaml', I first used a generic name for this
property and Kristoff asked to change to a vendor prefixed name.
https://lore.kernel.org/linux-kernel/1dfade07-f8c4-2e16-00dc-c7d183708259@linaro.org/
Based on this, as the property 'fsl,qmc-chan' has the exact same meaning in
fsl,qmc-audio.yaml and fsl,qmc-hdlc.yaml, I use the same name.
Best regards,
Hervé
>
> > + $ref: /schemas/types.yaml#/definitions/phandle-array
> > + items:
> > + - items:
> > + - description: phandle to QMC node
> > + - description: Channel number
> > + description:
> > + Should be a phandle/number pair. The phandle to QMC node and the QMC
> > + channel to use.
> > +
> > +required:
> > + - compatible
> > + - fsl,qmc-chan
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + hdlc {
> > + compatible = "fsl,qmc-hdlc";
> > + fsl,qmc-chan = <&qmc 16>;
> > + };
> > --
> > 2.41.0
> >
Powered by blists - more mailing lists