netdev - Re: [PATCH iwl-net] ice: Block switchdev mode when ADQ is acvite and vice versa

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <51af092b-cd91-e134-888c-0d0220d37d1c@linux.intel.com>
Date: Thu, 3 Aug 2023 16:58:45 +0200
From: Marcin Szycik <marcin.szycik@...ux.intel.com>
To: Leon Romanovsky <leon@...nel.org>
Cc: intel-wired-lan@...ts.osuosl.org, netdev@...r.kernel.org
Subject: Re: [PATCH iwl-net] ice: Block switchdev mode when ADQ is acvite and
 vice versa



On 03.08.2023 15:11, Leon Romanovsky wrote:
> On Tue, Aug 01, 2023 at 01:52:35PM +0200, Marcin Szycik wrote:
>> ADQ and switchdev are not supported simultaneously. Enabling both at the
>> same time can result in nullptr dereference.
>>
>> To prevent this, check if ADQ is active when changing devlink mode to
>> switchdev mode, and check if switchdev is active when enabling ADQ.
>>
>> Fixes: fbc7b27af0f9 ("ice: enable ndo_setup_tc support for mqprio_qdisc")
>> Signed-off-by: Marcin Szycik <marcin.szycik@...ux.intel.com>
>> ---
>>  drivers/net/ethernet/intel/ice/ice_eswitch.c | 5 +++++
>>  drivers/net/ethernet/intel/ice/ice_main.c    | 6 ++++++
>>  2 files changed, 11 insertions(+)
>>
>> diff --git a/drivers/net/ethernet/intel/ice/ice_eswitch.c b/drivers/net/ethernet/intel/ice/ice_eswitch.c
>> index ad0a007b7398..2ea5aaceee11 100644
>> --- a/drivers/net/ethernet/intel/ice/ice_eswitch.c
>> +++ b/drivers/net/ethernet/intel/ice/ice_eswitch.c
>> @@ -538,6 +538,11 @@ ice_eswitch_mode_set(struct devlink *devlink, u16 mode,
>>  		break;
>>  	case DEVLINK_ESWITCH_MODE_SWITCHDEV:
>>  	{
>> +		if (ice_is_adq_active(pf)) {
>> +			dev_err(ice_pf_to_dev(pf), "switchdev cannot be configured - ADQ is active. Delete ADQ configs using TC and try again\n");
> 
> It needs to be reported through netlink extack.

Will do, thanks!

> 
>> +			return -EOPNOTSUPP;
>> +		}
>> +
>>  		dev_info(ice_pf_to_dev(pf), "PF %d changed eswitch mode to switchdev",
>>  			 pf->hw.pf_id);
>>  		NL_SET_ERR_MSG_MOD(extack, "Changed eswitch mode to switchdev");
> 
> Thanks