[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1691387509-2113129-2-git-send-email-radhey.shyam.pandey@amd.com>
Date: Mon, 7 Aug 2023 11:21:40 +0530
From: Radhey Shyam Pandey <radhey.shyam.pandey@....com>
To: <vkoul@...nel.org>, <robh+dt@...nel.org>,
<krzysztof.kozlowski+dt@...aro.org>, <conor+dt@...nel.org>,
<michal.simek@....com>, <davem@...emloft.net>, <edumazet@...gle.com>,
<kuba@...nel.org>, <pabeni@...hat.com>, <linux@...linux.org.uk>
CC: <dmaengine@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <linux-kernel@...r.kernel.org>,
<netdev@...r.kernel.org>, <git@....com>, Radhey Shyam Pandey
<radhey.shyam.pandey@....com>
Subject: [PATCH net-next v5 01/10] dt-bindings: dmaengine: xilinx_dma:Add xlnx,axistream-connected property
Add an optional AXI DMA property 'xlnx,axistream-connected'. This
can be specified to indicate that DMA is connected to a streaming IP
in the hardware design and dma driver needs to do some additional
handling i.e pass metadata and perform streaming IP specific
configuration.
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@....com>
Acked-by: Rob Herring <robh@...nel.org>
---
Changes for v5:
- New patch in this series. Just a note that dmaengine series
was earlier sent as separate series[1] and now it's merged
with axiethernet series[2].
[1]: https://lore.kernel.org/all/20221124102745.2620370-1-sarath.babu.naidu.gaddam@amd.com
[2]: https://lore.kernel.org/all/20230630053844.1366171-1-sarath.babu.naidu.gaddam@amd.com
- Switch to amd.com email address.
---
Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
index d1700a5c36bf..fea5b09a439d 100644
--- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
+++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
@@ -49,6 +49,10 @@ Optional properties for AXI DMA and MCDMA:
register as configured in h/w. Takes values {8...26}. If the property
is missing or invalid then the default value 23 is used. This is the
maximum value that is supported by all IP versions.
+
+Optional properties for AXI DMA:
+- xlnx,axistream-connected: Tells whether DMA is connected to AXI stream IP.
+
Optional properties for VDMA:
- xlnx,flush-fsync: Tells which channel to Flush on Frame sync.
It takes following values:
--
2.34.1
Powered by blists - more mailing lists