netdev - Re: [PATCH v2 3/4] net: stmmac: Add glue layer for Loongson-1 SoC

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <c3454ad9-1874-4301-b1b1-4f76886802fb@lunn.ch>
Date: Sun, 20 Aug 2023 21:04:53 +0200
From: Andrew Lunn <andrew@...n.ch>
To: Keguang Zhang <keguang.zhang@...il.com>
Cc: netdev@...r.kernel.org, devicetree@...r.kernel.org,
	linux-mips@...r.kernel.org, linux-kernel@...r.kernel.org,
	Lee Jones <lee@...nel.org>, Rob Herring <robh+dt@...nel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
	Conor Dooley <conor+dt@...nel.org>,
	"David S . Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
	Thomas Bogendoerfer <tsbogend@...ha.franken.de>,
	Giuseppe Cavallaro <peppe.cavallaro@...com>,
	Alexandre Torgue <alexandre.torgue@...s.st.com>,
	Jose Abreu <joabreu@...opsys.com>,
	Serge Semin <Sergey.Semin@...kalelectronics.ru>
Subject: Re: [PATCH v2 3/4] net: stmmac: Add glue layer for Loongson-1 SoC

> +static int ls1b_dwmac_syscon_init(struct plat_stmmacenet_data *plat)
> +{
> +	struct ls1x_dwmac *dwmac = plat->bsp_priv;
> +	struct regmap_field **regmap_fields = dwmac->regmap_fields;
> +
> +	if (plat->bus_id) {
> +		regmap_field_write(regmap_fields[GMAC1_USE_UART1], 1);
> +		regmap_field_write(regmap_fields[GMAC1_USE_UART0], 1);
> +
> +		switch (plat->phy_interface) {
> +		case PHY_INTERFACE_MODE_RGMII:
> +			regmap_field_write(regmap_fields[GMAC1_USE_TXCLK], 0);
> +			regmap_field_write(regmap_fields[GMAC1_USE_PWM23], 0);
> +			break;

What about the other three RGMII modes? Plain rgmii is pretty unusual,
rgmii-id is the most used.

> +		case PHY_INTERFACE_MODE_MII:
> +			regmap_field_write(regmap_fields[GMAC1_USE_TXCLK], 1);
> +			regmap_field_write(regmap_fields[GMAC1_USE_PWM23], 1);
> +			break;
> +		default:
> +			dev_err(dwmac->dev, "Unsupported PHY mode %u\n",
> +				plat->phy_interface);
> +			return -EOPNOTSUPP;
> +		}
> +
> +		regmap_field_write(regmap_fields[GMAC1_SHUT], 0);
> +	} else {
> +		switch (plat->phy_interface) {
> +		case PHY_INTERFACE_MODE_RGMII:
> +			regmap_field_write(regmap_fields[GMAC0_USE_TXCLK], 0);
> +			regmap_field_write(regmap_fields[GMAC0_USE_PWM01], 0);
> +			break;

same here.

     Andrew