netdev - Re: [PATCH v2 3/4] net: stmmac: Add glue layer for Loongson-1 SoC

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAJhJPsUpmR0R8AhGMvFbBHXvcYcUsDmjw5_yb=NnFSdzjSf5dw@mail.gmail.com>
Date: Tue, 22 Aug 2023 17:49:03 +0800
From: Keguang Zhang <keguang.zhang@...il.com>
To: Andrew Lunn <andrew@...n.ch>
Cc: netdev@...r.kernel.org, devicetree@...r.kernel.org, 
	linux-mips@...r.kernel.org, linux-kernel@...r.kernel.org, 
	Lee Jones <lee@...nel.org>, Rob Herring <robh+dt@...nel.org>, 
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>, Conor Dooley <conor+dt@...nel.org>, 
	"David S . Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>, 
	Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>, 
	Thomas Bogendoerfer <tsbogend@...ha.franken.de>, Giuseppe Cavallaro <peppe.cavallaro@...com>, 
	Alexandre Torgue <alexandre.torgue@...s.st.com>, Jose Abreu <joabreu@...opsys.com>, 
	Serge Semin <Sergey.Semin@...kalelectronics.ru>
Subject: Re: [PATCH v2 3/4] net: stmmac: Add glue layer for Loongson-1 SoC

On Tue, Aug 22, 2023 at 5:47 PM Keguang Zhang <keguang.zhang@...il.com> wrote:
>
> On Mon, Aug 21, 2023 at 3:04 AM Andrew Lunn <andrew@...n.ch> wrote:
> >
> > > +static int ls1b_dwmac_syscon_init(struct plat_stmmacenet_data *plat)
> > > +{
> > > +     struct ls1x_dwmac *dwmac = plat->bsp_priv;
> > > +     struct regmap_field **regmap_fields = dwmac->regmap_fields;
> > > +
> > > +     if (plat->bus_id) {
> > > +             regmap_field_write(regmap_fields[GMAC1_USE_UART1], 1);
> > > +             regmap_field_write(regmap_fields[GMAC1_USE_UART0], 1);
> > > +
> > > +             switch (plat->phy_interface) {
> > > +             case PHY_INTERFACE_MODE_RGMII:
> > > +                     regmap_field_write(regmap_fields[GMAC1_USE_TXCLK], 0);
> > > +                     regmap_field_write(regmap_fields[GMAC1_USE_PWM23], 0);
> > > +                     break;
> >
> > What about the other three RGMII modes? Plain rgmii is pretty unusual,
> > rgmii-id is the most used.
> >
> According to the LS1B datasheet, only RGMII and MII are supported.
> And I can confirm that MII mode does work for LS1B.
>
Sorry! The RGMII mode does work for LS1B.

> > > +             case PHY_INTERFACE_MODE_MII:
> > > +                     regmap_field_write(regmap_fields[GMAC1_USE_TXCLK], 1);
> > > +                     regmap_field_write(regmap_fields[GMAC1_USE_PWM23], 1);
> > > +                     break;
> > > +             default:
> > > +                     dev_err(dwmac->dev, "Unsupported PHY mode %u\n",
> > > +                             plat->phy_interface);
> > > +                     return -EOPNOTSUPP;
> > > +             }
> > > +
> > > +             regmap_field_write(regmap_fields[GMAC1_SHUT], 0);
> > > +     } else {
> > > +             switch (plat->phy_interface) {
> > > +             case PHY_INTERFACE_MODE_RGMII:
> > > +                     regmap_field_write(regmap_fields[GMAC0_USE_TXCLK], 0);
> > > +                     regmap_field_write(regmap_fields[GMAC0_USE_PWM01], 0);
> > > +                     break;
> >
> > same here.
> >
> >      Andrew
>
>
>
> --
> Best regards,
>
> Keguang Zhang



-- 
Best regards,

Keguang Zhang