netdev - Re: [PATCH v2 3/4] net: stmmac: Add glue layer for Loongson-1 SoC

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <150ae6c1-8a2f-4fd7-b012-a53a909919d4@lunn.ch>
Date: Tue, 22 Aug 2023 17:20:35 +0200
From: Andrew Lunn <andrew@...n.ch>
To: Keguang Zhang <keguang.zhang@...il.com>
Cc: netdev@...r.kernel.org, devicetree@...r.kernel.org,
	linux-mips@...r.kernel.org, linux-kernel@...r.kernel.org,
	Lee Jones <lee@...nel.org>, Rob Herring <robh+dt@...nel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
	Conor Dooley <conor+dt@...nel.org>,
	"David S . Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
	Thomas Bogendoerfer <tsbogend@...ha.franken.de>,
	Giuseppe Cavallaro <peppe.cavallaro@...com>,
	Alexandre Torgue <alexandre.torgue@...s.st.com>,
	Jose Abreu <joabreu@...opsys.com>,
	Serge Semin <Sergey.Semin@...kalelectronics.ru>
Subject: Re: [PATCH v2 3/4] net: stmmac: Add glue layer for Loongson-1 SoC

> > What about the other three RGMII modes? Plain rgmii is pretty unusual,
> > rgmii-id is the most used.
> >
> According to the LS1B datasheet, only RGMII and MII are supported.
> And I can confirm that MII mode does work for LS1B.

What does your device tree look like? What are you setting phy-mode to
in the rgmii case? As i said, "rgmii" is pretty unusual, you normally
need "rgmii-id".

Something in the system needs to add 2ns delays to the RGMII clock
lines. Generally in device tree you pass phy-mode = "rgmii-id"; The
MAC configures itself for RGMII, and passes
PHY_INTERFACE_MODE_RGMII_ID to the PHY when it is attached. The PHY
then inserts the delays.

What is inserting the delays in your system?

     Andrew