| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <652b55cc-87dd-46d1-e480-e25f5f22b8d8@quicinc.com>
Date: Tue, 12 Sep 2023 19:38:13 +0530
From: Devi Priya <quic_devipriy@...cinc.com>
To: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
CC: <andersson@...nel.org>, <agross@...nel.org>, <konrad.dybcio@...aro.org>,
<mturquette@...libre.com>, <sboyd@...nel.org>, <robh+dt@...nel.org>,
<krzysztof.kozlowski+dt@...aro.org>, <conor+dt@...nel.org>,
<catalin.marinas@....com>, <will@...nel.org>, <p.zabel@...gutronix.de>,
<richardcochran@...il.com>, <arnd@...db.de>, <geert+renesas@...der.be>,
<nfraprado@...labora.com>, <rafal@...ecki.pl>, <peng.fan@....com>,
<linux-arm-msm@...r.kernel.org>, <linux-clk@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <netdev@...r.kernel.org>,
<quic_saahtoma@...cinc.com>
Subject: Re: [PATCH V2 5/7] clk: qcom: Add NSS clock Controller driver for
IPQ9574
On 8/25/2023 5:14 PM, Dmitry Baryshkov wrote:
> On Fri, 25 Aug 2023 at 12:15, Devi Priya <quic_devipriy@...cinc.com> wrote:
>>
>> Add Networking Sub System Clock Controller(NSSCC) driver for ipq9574 based
>> devices.
>>
>> Signed-off-by: Devi Priya <quic_devipriy@...cinc.com>
>> ---
>> Changes in V2:
>> - Added depends on ARM64 || COMPILE_TEST in Kconfig
>> - Added module_platform_driver
>> - Dropped patch [2/6] - clk: qcom: gcc-ipq9574: Mark nssnoc clocks as critical
>> & added pm_clk for nssnoc clocks
>> - Updated the uniphy clock names
>>
>> drivers/clk/qcom/Kconfig | 7 +
>> drivers/clk/qcom/Makefile | 1 +
>> drivers/clk/qcom/nsscc-ipq9574.c | 3109 ++++++++++++++++++++++++++++++
>> 3 files changed, 3117 insertions(+)
>> create mode 100644 drivers/clk/qcom/nsscc-ipq9574.c
>>
>> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
>> index bd9bfb11b328..3ecc11e2c8e3 100644
>> --- a/drivers/clk/qcom/Kconfig
>> +++ b/drivers/clk/qcom/Kconfig
>> @@ -203,6 +203,13 @@ config IPQ_GCC_9574
>> i2c, USB, SD/eMMC, etc. Select this for the root clock
>> of ipq9574.
>>
>> +config IPQ_NSSCC_9574
>> + tristate "IPQ9574 NSS Clock Controller"
>> + depends on ARM64 || COMPILE_TEST
>> + depends on IPQ_GCC_9574
>> + help
>> + Support for NSS clock controller on ipq9574 devices.
>> +
>> config MSM_GCC_8660
>> tristate "MSM8660 Global Clock Controller"
>> depends on ARM || COMPILE_TEST
>> diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
>> index 4790c8cca426..3f084928962e 100644
>> --- a/drivers/clk/qcom/Makefile
>> +++ b/drivers/clk/qcom/Makefile
>> @@ -30,6 +30,7 @@ obj-$(CONFIG_IPQ_GCC_6018) += gcc-ipq6018.o
>> obj-$(CONFIG_IPQ_GCC_806X) += gcc-ipq806x.o
>> obj-$(CONFIG_IPQ_GCC_8074) += gcc-ipq8074.o
>> obj-$(CONFIG_IPQ_GCC_9574) += gcc-ipq9574.o
>> +obj-$(CONFIG_IPQ_NSSCC_9574) += nsscc-ipq9574.o
>> obj-$(CONFIG_IPQ_LCC_806X) += lcc-ipq806x.o
>> obj-$(CONFIG_MDM_GCC_9607) += gcc-mdm9607.o
>> obj-$(CONFIG_MDM_GCC_9615) += gcc-mdm9615.o
>> diff --git a/drivers/clk/qcom/nsscc-ipq9574.c b/drivers/clk/qcom/nsscc-ipq9574.c
>> new file mode 100644
>> index 000000000000..65bdb449ae5f
>> --- /dev/null
>> +++ b/drivers/clk/qcom/nsscc-ipq9574.c
>> @@ -0,0 +1,3109 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2021, The Linux Foundation. All rights reserved.
>> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
>> + */
>> +
>> +#include <linux/clk-provider.h>
>> +#include <linux/err.h>
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/of_device.h>
>> +#include <linux/regmap.h>
>> +#include <linux/pm_clock.h>
>> +#include <linux/pm_runtime.h>
>> +
>> +#include <dt-bindings/clock/qcom,ipq9574-nsscc.h>
>> +#include <dt-bindings/reset/qcom,ipq9574-nsscc.h>
>> +
>> +#include "clk-alpha-pll.h"
>> +#include "clk-branch.h"
>> +#include "clk-pll.h"
>> +#include "clk-rcg.h"
>> +#include "clk-regmap.h"
>> +#include "clk-regmap-divider.h"
>> +#include "clk-regmap-mux.h"
>> +#include "common.h"
>> +#include "reset.h"
>> +
>> +/* Need to match the order of clocks in DT binding */
>> +enum {
>> + DT_NSSNOC_NSSCC_CLK,
>> + DT_NSSNOC_SNOC_CLK,
>> + DT_NSSNOC_SNOC_1_CLK,
>
> Not using the index makes it seem that these clocks are not used,
> until one scrolls down to pm_clks.
Okay, got it
>
> BTW: The NSSNOC_SNOC clocks make it look like there is an interconnect
> here (not a simple NIU).
Hi Dmitry, We are exploring on the ICC driver. In the meantime to
unblock PCIe/NSS changes getting merged, shall we use regmap_update_bits
and turn on the critical NSSNOC clocks, ANOC & SNOC pcie clocks in the
probe function of the gcc driver itself as like sm8550 driver to get the
changes merged?
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/clk/qcom/gcc-sm8550.c#n3347
>
>> + DT_BIAS_PLL_CC_CLK,
>> + DT_BIAS_PLL_NSS_NOC_CLK,
>> + DT_BIAS_PLL_UBI_NC_CLK,
>> + DT_GCC_GPLL0_OUT_AUX,
>> + DT_UNIPHY0_NSS_RX_CLK,
>> + DT_UNIPHY0_NSS_TX_CLK,
>> + DT_UNIPHY1_NSS_RX_CLK,
>> + DT_UNIPHY1_NSS_TX_CLK,
>> + DT_UNIPHY2_NSS_RX_CLK,
>> + DT_UNIPHY2_NSS_TX_CLK,
>> + DT_XO,
>
> As I wrote, please move DT_XO closer to the beginning of the list.
>
>> +};
>> +
>> +enum {
>> + P_BIAS_PLL_CC_CLK,
>> + P_BIAS_PLL_NSS_NOC_CLK,
>> + P_BIAS_PLL_UBI_NC_CLK,
>> + P_GCC_GPLL0_OUT_AUX,
>> + P_UBI32_PLL_OUT_MAIN,
>> + P_UNIPHY0_NSS_RX_CLK,
>> + P_UNIPHY0_NSS_TX_CLK,
>> + P_UNIPHY1_NSS_RX_CLK,
>> + P_UNIPHY1_NSS_TX_CLK,
>> + P_UNIPHY2_NSS_RX_CLK,
>> + P_UNIPHY2_NSS_TX_CLK,
>> + P_XO,
>> +};
>> +
>> +static const struct alpha_pll_config ubi32_pll_config = {
>> + .l = 0x3e,
>> + .alpha = 0x6666,
>> + .config_ctl_val = 0x200d4aa8,
>> + .config_ctl_hi_val = 0x3c,
>> + .main_output_mask = BIT(0),
>> + .aux_output_mask = BIT(1),
>> + .pre_div_val = 0x0,
>> + .pre_div_mask = BIT(12),
>> + .post_div_val = 0x0,
>> + .post_div_mask = GENMASK(9, 8),
>> + .alpha_en_mask = BIT(24),
>> + .test_ctl_val = 0x1c0000c0,
>> + .test_ctl_hi_val = 0x4000,
>> +};
>> +
>> +static struct clk_alpha_pll ubi32_pll_main = {
>> + .offset = 0x28000,
>> + .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_NSS_HUAYRA],
>> + .flags = SUPPORTS_DYNAMIC_UPDATE,
>> + .clkr = {
>> + .hw.init = &(const struct clk_init_data) {
>> + .name = "ubi32_pll_main",
>> + .parent_data = &(const struct clk_parent_data) {
>> + .index = DT_XO,
>> + },
>> + .num_parents = 1,
>> + .ops = &clk_alpha_pll_huayra_ops,
>> + },
>> + },
>> +};
>> +
>> +static struct clk_alpha_pll_postdiv ubi32_pll = {
>> + .offset = 0x28000,
>> + .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_NSS_HUAYRA],
>> + .width = 2,
>> + .clkr.hw.init = &(const struct clk_init_data) {
>> + .name = "ubi32_pll",
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &ubi32_pll_main.clkr.hw
>> + },
>> + .num_parents = 1,
>> + .ops = &clk_alpha_pll_postdiv_ro_ops,
>> + .flags = CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>
> [skipped clock tables, LGTM]
>
>> +static const struct of_device_id nss_cc_ipq9574_match_table[] = {
>> + { .compatible = "qcom,ipq9574-nsscc" },
>> + { }
>> +};
>> +MODULE_DEVICE_TABLE(of, nss_cc_ipq9574_match_table);
>> +
>> +static int nss_cc_ipq9574_probe(struct platform_device *pdev)
>> +{
>> + struct regmap *regmap;
>> + struct qcom_cc_desc nsscc_ipq9574_desc = nss_cc_ipq9574_desc;
>> +
>> + int ret;
>> +
>> + ret = devm_pm_runtime_enable(&pdev->dev);
>> + if (ret < 0)
>> + return ret;
>> +
>> + ret = devm_pm_clk_create(&pdev->dev);
>> + if (ret < 0)
>> + return ret;
>> +
>> + ret = of_pm_clk_add_clk(&pdev->dev, "nssnoc_nsscc");
>
> As we are switching to DT indices, better add new API that takes index
> rather than mixing indices and names.
sure okay
Thanks,
Devi Priya
>
>> + if (ret < 0) {
>> + dev_err(&pdev->dev, "Failed to acquire nssnoc_nsscc clock\n");
>> + return ret;
>> + }
>> +
>> + ret = of_pm_clk_add_clk(&pdev->dev, "nssnoc_snoc");
>> + if (ret < 0) {
>> + dev_err(&pdev->dev, "Failed to acquire nssnoc_snoc clock\n");
>> + return ret;
>> + }
>> +
>> + ret = of_pm_clk_add_clk(&pdev->dev, "nssnoc_snoc_1");
>> + if (ret < 0) {
>> + dev_err(&pdev->dev, "Failed to acquire nssnoc_snoc_1 clock\n");
>> + return ret;
>> + }
>> +
>> + ret = pm_runtime_get(&pdev->dev);
>> + if (ret)
>> + return ret;
>> +
>> + regmap = qcom_cc_map(pdev, &nsscc_ipq9574_desc);
>> + if (IS_ERR(regmap))
>> + return PTR_ERR(regmap);
>> +
>> + clk_alpha_pll_configure(&ubi32_pll_main, regmap, &ubi32_pll_config);
>> +
>> + return qcom_cc_really_probe(pdev, &nsscc_ipq9574_desc, regmap);
>> +}
>> +
>> +static const struct dev_pm_ops nss_cc_pm_ops = {
>> + SET_RUNTIME_PM_OPS(pm_clk_suspend, pm_clk_resume, NULL)
>> +};
>> +
>> +static struct platform_driver nss_cc_ipq9574_driver = {
>> + .probe = nss_cc_ipq9574_probe,
>> + .driver = {
>> + .name = "qcom,nsscc-ipq9574",
>> + .of_match_table = nss_cc_ipq9574_match_table,
>> + .pm = &nss_cc_pm_ops,
>> + },
>> +};
>> +
>> +module_platform_driver(nss_cc_ipq9574_driver);
>> +
>> +MODULE_DESCRIPTION("QTI NSS_CC IPQ9574 Driver");
>> +MODULE_LICENSE("GPL");
>> --
>> 2.34.1
>>
>
>
Powered by blists - more mailing lists