[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230913-frisbee-backlog-17391b962c13@spud>
Date: Wed, 13 Sep 2023 15:30:14 +0100
From: Conor Dooley <conor@...nel.org>
To: MD Danish Anwar <danishanwar@...com>
Cc: Andrew Lunn <andrew@...n.ch>, Roger Quadros <rogerq@...com>,
Conor Dooley <conor+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Rob Herring <robh+dt@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Jakub Kicinski <kuba@...nel.org>,
Eric Dumazet <edumazet@...gle.com>,
"David S. Miller" <davem@...emloft.net>,
Vignesh Raghavendra <vigneshr@...com>,
Simon Horman <horms@...nel.org>, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, netdev@...r.kernel.org, srk@...com,
r-gunasekaran@...com, Roger Quadros <rogerq@...nel.org>
Subject: Re: [PATCH net-next v3 1/2] dt-bindings: net: Add documentation for
Half duplex support.
On Wed, Sep 13, 2023 at 02:40:10PM +0530, MD Danish Anwar wrote:
> In order to support half-duplex operation at 10M and 100M link speeds, the
> PHY collision detection signal (COL) should be routed to ICSSG
> GPIO pin (PRGx_PRU0/1_GPI10) so that firmware can detect collision signal
> and apply the CSMA/CD algorithm applicable for half duplex operation. A DT
> property, "ti,half-duplex-capable" is introduced for this purpose. If
> board has PHY COL pin conencted to PRGx_PRU1_GPIO10, this DT property can
> be added to eth node of ICSSG, MII port to support half duplex operation at
> that port.
>
> Reviewed-by: Roger Quadros <rogerq@...nel.org>
> Signed-off-by: MD Danish Anwar <danishanwar@...com>
Acked-by: Conor Dooley <conor.dooley@...rochip.com>
Thanks,
Conor.
> ---
> Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml b/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml
> index 836d2d60e87d..229c8f32019f 100644
> --- a/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml
> +++ b/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml
> @@ -107,6 +107,13 @@ properties:
> phandle to system controller node and register offset
> to ICSSG control register for RGMII transmit delay
>
> + ti,half-duplex-capable:
> + type: boolean
> + description:
> + Indicates that the PHY output pin COL is routed to ICSSG GPIO pin
> + (PRGx_PRU0/1_GPIO10) as input so that the ICSSG MII port is
> + capable of half duplex operations.
> +
> required:
> - reg
> anyOf:
> --
> 2.34.1
>
Download attachment "signature.asc" of type "application/pgp-signature" (229 bytes)
Powered by blists - more mailing lists