[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20231013115245.1517606-1-aleksandr.loktionov@intel.com>
Date: Fri, 13 Oct 2023 13:52:45 +0200
From: Aleksandr Loktionov <aleksandr.loktionov@...el.com>
To: intel-wired-lan@...ts.osuosl.org,
anthony.l.nguyen@...el.com,
aleksandr.loktionov@...el.com,
jedrzej.jagielski@...el.com
Cc: netdev@...r.kernel.org
Subject: [PATCH iwl-next v5] i40e: add restore default speed when changed PHY doesn't support it
Currently, there was no link after plugging a different type of PHY
module if user forced previous PHY specific link type/speed before.
Add reset link speed settings to the default values for PHY module,
if different PHY module is inserted and currently defined user-specified
speed is not compatible with this module.
Co-developed-by: Radoslaw Tyl <radoslawx.tyl@...el.com>
Signed-off-by: Radoslaw Tyl <radoslawx.tyl@...el.com>
Reviewed-by: Jedrzej Jagielski <jedrzej.jagielski@...el.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@...el.com>
---
v1->v2 fixed Reviewed-by tags
v2->v3 fixed commit messages and tags
v3->v4 fixed commit message typo
v4->v5 cc to netdev@...r.kernel.org
---
---
drivers/net/ethernet/intel/i40e/i40e_main.c | 65 +++++++++++++++++++--
1 file changed, 61 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index d0d0218..6829720 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -10076,6 +10076,55 @@ static void i40e_reset_subtask(struct i40e_pf *pf)
rtnl_unlock();
}
+/**
+ * i40e_restore_supported_phy_link_speed - Restore default PHY speed
+ * @pf: board private structure
+ *
+ * Set PHY module speeds according to values got from
+ * initial link speed abilites.
+ **/
+static int i40e_restore_supported_phy_link_speed(struct i40e_pf *pf)
+{
+ struct i40e_aq_get_phy_abilities_resp abilities;
+ struct i40e_aq_set_phy_config config = {0};
+ struct i40e_hw *hw = &pf->hw;
+ int err;
+
+ err = i40e_aq_get_phy_capabilities(hw, false, false, &abilities, NULL);
+ if (err) {
+ dev_dbg(&pf->pdev->dev, "failed to get phy cap., ret = %i last_status = %s\n",
+ err, i40e_aq_str(&pf->hw, pf->hw.aq.asq_last_status));
+ return err;
+ }
+ config.eee_capability = abilities.eee_capability;
+ config.phy_type_ext = abilities.phy_type_ext;
+ config.low_power_ctrl = abilities.d3_lpan;
+ config.abilities = abilities.abilities;
+ config.abilities |= I40E_AQ_PHY_ENABLE_AN;
+ config.phy_type = abilities.phy_type;
+ config.eeer = abilities.eeer_val;
+ config.fec_config = abilities.fec_cfg_curr_mod_ext_info &
+ I40E_AQ_PHY_FEC_CONFIG_MASK;
+ err = i40e_aq_get_phy_capabilities(hw, false, true, &abilities, NULL);
+ if (err) {
+ dev_dbg(&pf->pdev->dev, "get supported phy types ret = %i last_status = %s\n",
+ err, i40e_aq_str(&pf->hw, pf->hw.aq.asq_last_status));
+ return err;
+ }
+ config.link_speed = abilities.link_speed;
+
+ err = i40e_aq_set_phy_config(hw, &config, NULL);
+ if (err)
+ return err;
+ err = i40e_aq_set_link_restart_an(hw, true, NULL);
+ if (err)
+ return err;
+
+ pf->hw.phy.link_info.requested_speeds = config.link_speed;
+
+ return err;
+}
+
/**
* i40e_handle_link_event - Handle link event
* @pf: board private structure
@@ -10086,6 +10135,7 @@ static void i40e_handle_link_event(struct i40e_pf *pf,
{
struct i40e_aqc_get_link_status *status =
(struct i40e_aqc_get_link_status *)&e->desc.params.raw;
+ int err;
/* Do a new status request to re-enable LSE reporting
* and load new status information into the hw struct
@@ -10109,10 +10159,17 @@ static void i40e_handle_link_event(struct i40e_pf *pf,
(!(status->an_info & I40E_AQ_QUALIFIED_MODULE)) &&
(!(status->link_info & I40E_AQ_LINK_UP)) &&
(!(pf->flags & I40E_FLAG_LINK_DOWN_ON_CLOSE_ENABLED))) {
- dev_err(&pf->pdev->dev,
- "Rx/Tx is disabled on this device because an unsupported SFP module type was detected.\n");
- dev_err(&pf->pdev->dev,
- "Refer to the Intel(R) Ethernet Adapters and Devices User Guide for a list of supported modules.\n");
+ err = i40e_restore_supported_phy_link_speed(pf);
+ if (err) {
+ dev_err(&pf->pdev->dev,
+ "Rx/Tx is disabled on this device because an unsupported SFP module type was detected.\n");
+ dev_err(&pf->pdev->dev,
+ "Refer to the Intel(R) Ethernet Adapters and Devices User Guide for a list of supported modules.\n");
+
+ return;
+ }
+
+ dev_info(&pf->pdev->dev, "The selected speed is incompatible with the connected media type. Resetting to the default speed setting for the media type.");
}
}
}
--
2.25.1
Powered by blists - more mailing lists