[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <b8f3eb2e-afaa-48c7-c830-300f888b1f1f@intel.com>
Date: Fri, 13 Oct 2023 14:35:10 +0200
From: Przemek Kitszel <przemyslaw.kitszel@...el.com>
To: Aleksandr Loktionov <aleksandr.loktionov@...el.com>,
<intel-wired-lan@...ts.osuosl.org>, <anthony.l.nguyen@...el.com>,
<jedrzej.jagielski@...el.com>
CC: <netdev@...r.kernel.org>
Subject: Re: [PATCH iwl-next v5] i40e: add restore default speed when changed
PHY doesn't support it
On 10/13/23 13:52, Aleksandr Loktionov wrote:
> Currently, there was no link after plugging a different type of PHY
> module if user forced previous PHY specific link type/speed before.
>
> Add reset link speed settings to the default values for PHY module,
> if different PHY module is inserted and currently defined user-specified
> speed is not compatible with this module.
>
> Co-developed-by: Radoslaw Tyl <radoslawx.tyl@...el.com>
> Signed-off-by: Radoslaw Tyl <radoslawx.tyl@...el.com>
> Reviewed-by: Jedrzej Jagielski <jedrzej.jagielski@...el.com>
> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@...el.com>
> ---
> v1->v2 fixed Reviewed-by tags
> v2->v3 fixed commit messages and tags
> v3->v4 fixed commit message typo
> v4->v5 cc to netdev@...r.kernel.org
good move!,
now you have to focus on the rules more, like those:
do not post next version before 24h of prev one;
more metadata:
I would remove the word 'add' from the Subject line;
You still need to change author to Radoslaw.
> ---
> ---
> drivers/net/ethernet/intel/i40e/i40e_main.c | 65 +++++++++++++++++++--
> 1 file changed, 61 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
> index d0d0218..6829720 100644
> --- a/drivers/net/ethernet/intel/i40e/i40e_main.c
> +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
> @@ -10076,6 +10076,55 @@ static void i40e_reset_subtask(struct i40e_pf *pf)
> rtnl_unlock();
> }
>
> +/**
> + * i40e_restore_supported_phy_link_speed - Restore default PHY speed
> + * @pf: board private structure
> + *
> + * Set PHY module speeds according to values got from
> + * initial link speed abilites.
> + **/
> +static int i40e_restore_supported_phy_link_speed(struct i40e_pf *pf)
> +{
> + struct i40e_aq_get_phy_abilities_resp abilities;
> + struct i40e_aq_set_phy_config config = {0};
just `= {};`
> + struct i40e_hw *hw = &pf->hw;
> + int err;
> +
> + err = i40e_aq_get_phy_capabilities(hw, false, false, &abilities, NULL);
> + if (err) {
> + dev_dbg(&pf->pdev->dev, "failed to get phy cap., ret = %i last_status = %s\n",
> + err, i40e_aq_str(&pf->hw, pf->hw.aq.asq_last_status));
> + return err;
> + }
> + config.eee_capability = abilities.eee_capability;
> + config.phy_type_ext = abilities.phy_type_ext;
> + config.low_power_ctrl = abilities.d3_lpan;
> + config.abilities = abilities.abilities;
> + config.abilities |= I40E_AQ_PHY_ENABLE_AN;
> + config.phy_type = abilities.phy_type;
> + config.eeer = abilities.eeer_val;
> + config.fec_config = abilities.fec_cfg_curr_mod_ext_info &
> + I40E_AQ_PHY_FEC_CONFIG_MASK;
> + err = i40e_aq_get_phy_capabilities(hw, false, true, &abilities, NULL);
> + if (err) {
> + dev_dbg(&pf->pdev->dev, "get supported phy types ret = %i last_status = %s\n",
s/ / /g
(in English: replace double spaces by single ones)
> + err, i40e_aq_str(&pf->hw, pf->hw.aq.asq_last_status));
> + return err;
> + }
> + config.link_speed = abilities.link_speed;
> +
> + err = i40e_aq_set_phy_config(hw, &config, NULL);
> + if (err)
> + return err;
> + err = i40e_aq_set_link_restart_an(hw, true, NULL);
> + if (err)
> + return err;
> +
> + pf->hw.phy.link_info.requested_speeds = config.link_speed;
> +
> + return err;
> +}
> +
> /**
> * i40e_handle_link_event - Handle link event
> * @pf: board private structure
> @@ -10086,6 +10135,7 @@ static void i40e_handle_link_event(struct i40e_pf *pf,
> {
> struct i40e_aqc_get_link_status *status =
> (struct i40e_aqc_get_link_status *)&e->desc.params.raw;
> + int err;
>
> /* Do a new status request to re-enable LSE reporting
> * and load new status information into the hw struct
> @@ -10109,10 +10159,17 @@ static void i40e_handle_link_event(struct i40e_pf *pf,
> (!(status->an_info & I40E_AQ_QUALIFIED_MODULE)) &&
> (!(status->link_info & I40E_AQ_LINK_UP)) &&
> (!(pf->flags & I40E_FLAG_LINK_DOWN_ON_CLOSE_ENABLED))) {
> - dev_err(&pf->pdev->dev,
> - "Rx/Tx is disabled on this device because an unsupported SFP module type was detected.\n");
> - dev_err(&pf->pdev->dev,
> - "Refer to the Intel(R) Ethernet Adapters and Devices User Guide for a list of supported modules.\n");
> + err = i40e_restore_supported_phy_link_speed(pf);
> + if (err) {
> + dev_err(&pf->pdev->dev,
> + "Rx/Tx is disabled on this device because an unsupported SFP module type was detected.\n");
> + dev_err(&pf->pdev->dev,
> + "Refer to the Intel(R) Ethernet Adapters and Devices User Guide for a list of supported modules.\n");
> +
> + return;
> + }
> +
> + dev_info(&pf->pdev->dev, "The selected speed is incompatible with the connected media type. Resetting to the default speed setting for the media type.");
> }
> }
> }
Powered by blists - more mailing lists