[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20231019163212.yzt6erzptuifs5yn@skbuf>
Date: Thu, 19 Oct 2023 19:32:12 +0300
From: Vladimir Oltean <olteanv@...il.com>
To: Oleksij Rempel <o.rempel@...gutronix.de>
Cc: Woojung Huh <woojung.huh@...rochip.com>, UNGLinuxDriver@...rochip.com,
Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Heiner Kallweit <hkallweit1@...il.com>, kernel@...gutronix.de,
linux-kernel@...r.kernel.org, Russell King <linux@...linux.org.uk>,
netdev@...r.kernel.org,
Alexander Stein <alexander.stein@...tq-group.com>
Subject: Re: [PATCH net-next v3 2/2] net: phy: micrel: Fix forced link mode
for KSZ886X switches
On Thu, Oct 19, 2023 at 01:14:59PM +0200, Oleksij Rempel wrote:
> Address a link speed detection issue in KSZ886X PHY driver when in
> forced link mode. Previously, link partners like "ASIX AX88772B"
> with KSZ8873 could fall back to 10Mbit instead of configured 100Mbit.
>
> The issue arises as KSZ886X PHY continues sending Fast Link Pulses (FLPs)
> even with autonegotiation off, misleading link partners in autoneg mode,
> leading to incorrect link speed detection.
>
> Now, when autonegotiation is disabled, the driver sets the link state
> forcefully using KSZ886X_CTRL_FORCE_LINK bit. This action, beyond just
> disabling autonegotiation, makes the PHY state more reliably detected by
> link partners using parallel detection, thus fixing the link speed
> misconfiguration.
>
> With autonegotiation enabled, link state is not forced, allowing proper
> autonegotiation process participation.
>
> Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de>
> ---
Reviewed-by: Vladimir Oltean <vladimir.oltean@....com>
Powered by blists - more mailing lists