[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <d52d766f-11a5-494a-63cc-cbffd2945069@bootlin.com>
Date: Wed, 15 Nov 2023 16:07:32 +0100 (CET)
From: Romain Gantois <romain.gantois@...tlin.com>
To: Wojciech Drewek <wojciech.drewek@...el.com>
cc: Romain Gantois <romain.gantois@...tlin.com>, davem@...emloft.net,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Jakub Kicinski <kuba@...nel.org>, Eric Dumazet <edumazet@...gle.com>,
Paolo Abeni <pabeni@...hat.com>, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
thomas.petazzoni@...tlin.com, Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>, linux-arm-kernel@...ts.infradead.org,
Vladimir Oltean <vladimir.oltean@....com>,
Luka Perkov <luka.perkov@...tura.hr>,
Robert Marko <robert.marko@...tura.hr>, Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...ainline.org>
Subject: Re: [PATCH net-next v3 3/8] net: qualcomm: ipqess: introduce the
Qualcomm IPQESS driver
On Wed, 15 Nov 2023, Wojciech Drewek wrote:
...
> > +static int ipqess_port_vlan_rx_add_vid(struct net_device *dev, __be16 proto,
> > + u16 vid)
> > +{
> > + struct ipqess_port *port = netdev_priv(dev);
> > + struct switchdev_obj_port_vlan vlan = {
> > + .obj.id = SWITCHDEV_OBJ_ID_PORT_VLAN,
> > + .vid = vid,
> > + /* This API only allows programming tagged, non-PVID VIDs */
> > + .flags = 0,
> > + };
> > + struct netlink_ext_ack extack = {0};
> > + int ret;
> > +
> > + /* User port... */
> > + ret = ipqess_port_do_vlan_add(port->sw->priv, port->index, &vlan, &extack);
> > + if (ret) {
> > + if (extack._msg)
> > + netdev_err(dev, "%s\n", extack._msg);
> > + return ret;
> > + }
> > +
> > + /* And CPU port... */
> > + ret = ipqess_port_do_vlan_add(port->sw->priv, 0, &vlan, &extack);
> > + if (ret) {
>
> Should we delete vlan from user port if this fails?
I'll have to look into how and when this API is called in more detail but I
think this would indeed make sense.
> > +
> > + /* Flush the FDB table */
> > + qca8k_fdb_flush(priv);
> > +
> > + if (ret < 0)
> > + goto devlink_free;
> > +
> > + /* set Port0 status */
> > + reg = QCA8K_PORT_STATUS_LINK_AUTO;
> > + reg |= QCA8K_PORT_STATUS_DUPLEX;
> > + reg |= QCA8K_PORT_STATUS_SPEED_1000;
> > + reg |= QCA8K_PORT_STATUS_RXFLOW;
> > + reg |= QCA8K_PORT_STATUS_TXFLOW;
> > + reg |= QCA8K_PORT_STATUS_TXMAC | QCA8K_PORT_STATUS_RXMAC;
> > + qca8k_write(priv, QCA8K_REG_PORT_STATUS(0), reg);
> > + sw->port0_enabled = true;
> > +
> > + return 0;
> > +
> > +devlink_free:
>
> Why is it called devlink_free, I don't see any connection to devlink.
I think this is leftover from a previous version of this function, where it
interacted with devlink. I'll rename it to error.
Best,
--
Romain Gantois, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
Powered by blists - more mailing lists