[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <386fcee0-1eab-4c0b-8866-a67821a487ee@quicinc.com>
Date: Fri, 17 Nov 2023 19:20:44 +0800
From: Jie Luo <quic_luoj@...cinc.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>, <agross@...nel.org>,
<andersson@...nel.org>, <konrad.dybcio@...aro.org>,
<davem@...emloft.net>, <edumazet@...gle.com>, <kuba@...nel.org>,
<pabeni@...hat.com>, <robh+dt@...nel.org>,
<krzysztof.kozlowski+dt@...aro.org>, <conor+dt@...nel.org>,
<andrew@...n.ch>, <hkallweit1@...il.com>, <linux@...linux.org.uk>,
<robert.marko@...tura.hr>
CC: <linux-arm-msm@...r.kernel.org>, <netdev@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<quic_srichara@...cinc.com>
Subject: Re: [PATCH 9/9] dt-bindings: net: ipq4019-mdio: Document ipq5332
platform
On 11/17/2023 6:40 PM, Krzysztof Kozlowski wrote:
> On 17/11/2023 11:36, Jie Luo wrote:
>>>> clocks:
>>>> - items:
>>>> - - description: MDIO clock source frequency fixed to 100MHZ
>>>> + minItems: 1
>>>> + maxItems: 5
>>>> + description:
>>>
>>> Doesn't this make all other variants with incorrect constraints?
>>
>> There are 5 clock items, the first one is the legacy MDIO clock, the
>> other clocks are new added for ipq5332 platform, will describe it more
>> clearly in the next patch set.
>
> OTHER variants. Not this one.
The change here is for the clock number added for the ipq5332 platform,
the other platforms still use only legacy MDIO clock.
so i add minItems and maxItems, i will check other .yaml files for the
reference.
>
>>
>>>
>>>> + MDIO system clock frequency fixed to 100MHZ, and the GCC uniphy
>>>> + clocks enabled for resetting ethernet PHY.
>>>>
>>>> clock-names:
>>>> - items:
>>>> - - const: gcc_mdio_ahb_clk
>>>> + minItems: 1
>>>> + maxItems: 5
>>>> +
>>>> + phy-reset-gpio:
>>>
>>> No, for multiple reasons. It's gpios first of all. Where do you see such
>>> property? Where is the existing definition?
>>
>> will remove this property, and update to use the exited PHY GPIO reset.
>>
>>>
>>> Then it is "reset-gpios" if this is MDIO. Why do you put phy properties
>>> in MDIO?
>>>
>>>> + minItems: 1
>>>> + maxItems: 3
>>>> + description:
>>>> + GPIO used to reset the PHY, each GPIO is for resetting the connected
>>>> + ethernet PHY device.
>>>> +
>>>> + phyaddr-fixup:
>>>> + description: Register address for programing MDIO address of PHY devices
>>>
>>> You did not test code which you sent.
>>
>> Hi Krzysztof,
>> This patch is passed with the following command in my workspace.
>> i will upgrade and install yamllint to make sure there is no
>> warning reported anymore.
>>
>> make dt_bg_check
>
> No clue what's this, but no, I do not believe you tested it at all. It's
> not about yamllint. It's was not tested. Look at errors reported on
> mailing list.
>
>> DT_SCHEMA_FILES=Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml
>
Hi Krzysztof,
Here is the output when i run the dt check with this patch applied in my
workspace, md64 is the alias for compiling the arm64 platform.
md64 dt_binding_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml
warning: python package 'yamllint' not installed, skipping
CHKDT Documentation/devicetree/bindings/processed-schema.json
SCHEMA Documentation/devicetree/bindings/processed-schema.json
DTEX
Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.example.dts
DTC_CHK
Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.example.dtb
>
> Best regards,
> Krzysztof
>
Powered by blists - more mailing lists