lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date: Sat, 18 Nov 2023 14:27:48 +0800
From: Luo Jie <>
To: <>, <>, <>,
        <>, <>, <>,
        <>, <>,
        <>, <>, <>
CC: <>, <>,
        <>, <>
Subject: [PATCH v5 0/6] add qca8084 ethernet phy driver

QCA8084 is four-port PHY with maximum link capability 2.5G,
which supports the interface mode qusgmii and sgmii mode,
there are two PCSs available to connected with ethernet port.

QCA8084 can work in switch mode or PHY mode.
For switch mode, both PCS0 and PCS1 work on sgmii mode.
For PHY mode, PCS1 works on qusgmii mode, the last port
(the fourth port) works on sgmii mode.

Besides this PHY driver patches, the PCS driver is also needed
to bring up the qca8084 device, which mainly configurs PCS
and clocks.

Changes in v3:
	* pick the two patches to introduce the interface mode
	  10g-qxgmii from Vladimir Oltean(
	* add the function phydev_id_is_qca808x to identify the
	  PHY qca8081 and qca8084.
	* update the interface mode name PHY_INTERFACE_MODE_QUSGMII

Changes in v4:
	* remove the following patch:
	  <net: phylink: move phylink_pcs_neg_mode() to phylink.c>.
	* split out 10g_qxgmii change of ethernet-controller.yaml.

Changes in v5:
	* update the author of the patch below.
	  <introduce core support for phy-mode = "10g-qxgmii">.

Luo Jie (4):
  net: phy: at803x: add QCA8084 ethernet phy support
  net: phy: at803x: add the function phydev_id_is_qca808x
  net: phy: at803x: Add qca8084_config_init function
  net: phy: qca8084: add qca8084_link_change_notify

Vladimir Oltean (2):
  net: phy: introduce core support for phy-mode = "10g-qxgmii"
  dt-bindings: net: ethernet-controller: add 10g-qxgmii mode

 .../bindings/net/ethernet-controller.yaml     |   1 +
 Documentation/networking/phy.rst              |   6 +
 drivers/net/phy/at803x.c                      | 130 +++++++++++++++++-
 drivers/net/phy/phy-core.c                    |   1 +
 drivers/net/phy/phylink.c                     |  11 +-
 include/linux/phy.h                           |   4 +
 include/linux/phylink.h                       |   2 +
 7 files changed, 147 insertions(+), 8 deletions(-)

base-commit: eff99d8edbed7918317331ebd1e365d8e955d65e

Powered by blists - more mailing lists