lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ZVjest6pUoM2b9mO@oden.dyn.berto.se>
Date: Sat, 18 Nov 2023 16:56:34 +0100
From: Niklas Söderlund <niklas.soderlund+renesas@...natech.se>
To: Geert Uytterhoeven <geert@...ux-m68k.org>
Cc: "David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
	Richard Cochran <richardcochran@...il.com>, netdev@...r.kernel.org,
	linux-renesas-soc@...r.kernel.org
Subject: Re: [net-next 4/5] net: ethernet: renesas: rcar_gen4_ptp: Add V4H
 clock setting

Hi Geert,

Thanks for your review.

On 2023-11-18 12:16:51 +0100, Geert Uytterhoeven wrote:
> Hi Niklas,
> 
> On Fri, Nov 17, 2023 at 5:45 PM Niklas Söderlund
> <niklas.soderlund+renesas@...natech.se> wrote:
> > The gPTP clock is different between R-Car S4 and R-Car V4H. In
> > preparation of adding R-Car V4H support define the clock setting.
> >
> > Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@...natech.se>
> 
> Thanks for your patch!
> 
> > --- a/drivers/net/ethernet/renesas/rcar_gen4_ptp.h
> > +++ b/drivers/net/ethernet/renesas/rcar_gen4_ptp.h
> > @@ -9,8 +9,12 @@
> >
> >  #include <linux/ptp_clock_kernel.h>
> >
> > -#define PTPTIVC_INIT                   0x19000000      /* 320MHz */
> > -#define RCAR_GEN4_PTP_CLOCK_S4         PTPTIVC_INIT
> > +#define PTPTIVC_INIT_200MHZ            0x28000000      /* 200MHz */
> > +#define PTPTIVC_INIT_320MHZ            0x19000000      /* 320MHz */
> > +
> > +#define RCAR_GEN4_PTP_CLOCK_S4         PTPTIVC_INIT_320MHZ
> > +#define RCAR_GEN4_PTP_CLOCK_V4H                PTPTIVC_INIT_200MHZ
> 
> I think the gPTP Timer Increment Value Configuration value should be
> calculated from the module clock rate instead (rsw2 runs at 320 MHz
> on R-Car S4, S0D4_HSC and tsn run at 200 MHz on R-Car V4H).

This is a great idea, I will do so for v2.

> 
> Gr{oetje,eeting}s,
> 
>                         Geert
> 
> -- 
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@...ux-m68k.org
> 
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
>                                 -- Linus Torvalds

-- 
Kind Regards,
Niklas Söderlund

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ