[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <10dc0fff-fc00-4c1f-97cf-30c5e5e8f983@linaro.org>
Date: Mon, 20 Nov 2023 15:22:08 +0100
From: Konrad Dybcio <konrad.dybcio@...aro.org>
To: Luo Jie <quic_luoj@...cinc.com>, agross@...nel.org, andersson@...nel.org,
davem@...emloft.net, edumazet@...gle.com, kuba@...nel.org,
pabeni@...hat.com, robh+dt@...nel.org, krzysztof.kozlowski+dt@...aro.org,
conor+dt@...nel.org, andrew@...n.ch, hkallweit1@...il.com,
linux@...linux.org.uk, robert.marko@...tura.hr
Cc: linux-arm-msm@...r.kernel.org, netdev@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
quic_srichara@...cinc.com
Subject: Re: [PATCH 2/9] net: mdio: ipq4019: Enable the clocks for ipq5332
platform
On 15.11.2023 04:25, Luo Jie wrote:
> For the platform ipq5332, the related GCC clocks need to be enabled
> to make the GPIO reset of the MDIO slave devices taking effect.
>
> Signed-off-by: Luo Jie <quic_luoj@...cinc.com>
[...]
> static int ipq4019_mdio_wait_busy(struct mii_bus *bus)
> @@ -212,6 +231,38 @@ static int ipq_mdio_reset(struct mii_bus *bus)
> u32 val;
> int ret;
>
> + /* For the platform ipq5332, there are two uniphy available to connect the
> + * ethernet devices, the uniphy gcc clock should be enabled for resetting
> + * the connected device such as qca8386 switch or qca8081 PHY effectively.
> + */
> + if (of_device_is_compatible(bus->parent->of_node, "qcom,ipq5332-mdio")) {
Would that not also be taken care of in the phy driver?
Konrad
Powered by blists - more mailing lists