lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20231122183435.2510656-3-srasheed@marvell.com>
Date: Wed, 22 Nov 2023 10:34:35 -0800
From: Shinas Rasheed <srasheed@...vell.com>
To: <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>
CC: <hgani@...vell.com>, <vimleshk@...vell.com>, <egallen@...hat.com>,
        <mschmidt@...hat.com>, <pabeni@...hat.com>, <horms@...nel.org>,
        <kuba@...nel.org>, <davem@...emloft.net>, <wizhao@...hat.com>,
        <konguyen@...hat.com>, <jesse.brandeburg@...el.com>,
        <sumang@...vell.com>, Shinas Rasheed <srasheed@...vell.com>,
        Veerasenareddy Burru
	<vburru@...vell.com>,
        Sathesh Edara <sedara@...vell.com>,
        Eric Dumazet
	<edumazet@...gle.com>
Subject: [PATCH net-next v2 2/2] octeon_ep: get max rx packet length from firmware

Max receive packet length can vary across SoCs, so
this needs to be queried from respective firmware and
filled by driver. A control net get mtu api should be
implemented to do the same.

Signed-off-by: Shinas Rasheed <srasheed@...vell.com>
---
V2:
  - Removed OCTEP_MAX_MTU macro as it is redundant.

V1: https://lore.kernel.org/all/20231121191224.2489474-1-srasheed@marvell.com/

 .../ethernet/marvell/octeon_ep/octep_config.h  |  2 --
 .../marvell/octeon_ep/octep_ctrl_net.c         | 18 ++++++++++++++++++
 .../marvell/octeon_ep/octep_ctrl_net.h         | 10 ++++++++++
 .../ethernet/marvell/octeon_ep/octep_main.c    | 10 +++++++++-
 4 files changed, 37 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/marvell/octeon_ep/octep_config.h b/drivers/net/ethernet/marvell/octeon_ep/octep_config.h
index 91cfa19c65b9..4c937ba5589f 100644
--- a/drivers/net/ethernet/marvell/octeon_ep/octep_config.h
+++ b/drivers/net/ethernet/marvell/octeon_ep/octep_config.h
@@ -45,8 +45,6 @@
 
 /* Minimum MTU supported by Octeon network interface */
 #define OCTEP_MIN_MTU        ETH_MIN_MTU
-/* Maximum MTU supported by Octeon interface*/
-#define OCTEP_MAX_MTU        (10000 - (ETH_HLEN + ETH_FCS_LEN))
 /* Default MTU */
 #define OCTEP_DEFAULT_MTU    1500
 
diff --git a/drivers/net/ethernet/marvell/octeon_ep/octep_ctrl_net.c b/drivers/net/ethernet/marvell/octeon_ep/octep_ctrl_net.c
index 2eeeaa7188b1..5fa596c674da 100644
--- a/drivers/net/ethernet/marvell/octeon_ep/octep_ctrl_net.c
+++ b/drivers/net/ethernet/marvell/octeon_ep/octep_ctrl_net.c
@@ -198,6 +198,24 @@ int octep_ctrl_net_set_mac_addr(struct octep_device *oct, int vfid, u8 *addr,
 	return octep_send_mbox_req(oct, &d, wait_for_response);
 }
 
+int octep_ctrl_net_get_mtu(struct octep_device *oct, int vfid)
+{
+	struct octep_ctrl_net_wait_data d = {};
+	struct octep_ctrl_net_h2f_req *req;
+	int err;
+
+	req = &d.data.req;
+	init_send_req(&d.msg, req, mtu_sz, vfid);
+	req->hdr.s.cmd = OCTEP_CTRL_NET_H2F_CMD_MTU;
+	req->mtu.cmd = OCTEP_CTRL_NET_CMD_GET;
+
+	err = octep_send_mbox_req(oct, &d, true);
+	if (err < 0)
+		return err;
+
+	return d.data.resp.mtu.val;
+}
+
 int octep_ctrl_net_set_mtu(struct octep_device *oct, int vfid, int mtu,
 			   bool wait_for_response)
 {
diff --git a/drivers/net/ethernet/marvell/octeon_ep/octep_ctrl_net.h b/drivers/net/ethernet/marvell/octeon_ep/octep_ctrl_net.h
index 02b8fcf890d0..a2463b460ad9 100644
--- a/drivers/net/ethernet/marvell/octeon_ep/octep_ctrl_net.h
+++ b/drivers/net/ethernet/marvell/octeon_ep/octep_ctrl_net.h
@@ -287,6 +287,16 @@ int octep_ctrl_net_get_mac_addr(struct octep_device *oct, int vfid, u8 *addr);
 int octep_ctrl_net_set_mac_addr(struct octep_device *oct, int vfid, u8 *addr,
 				bool wait_for_response);
 
+/**
+ * octep_ctrl_net_get_mtu() - Get max MTU from firmware.
+ *
+ * @oct: non-null pointer to struct octep_device.
+ * @vfid: Index of virtual function.
+ *
+ * return value: mtu on success, -errno on failure.
+ */
+int octep_ctrl_net_get_mtu(struct octep_device *oct, int vfid);
+
 /** 
  * octep_ctrl_net_set_mtu() - Set mtu in firmware.
  *
diff --git a/drivers/net/ethernet/marvell/octeon_ep/octep_main.c b/drivers/net/ethernet/marvell/octeon_ep/octep_main.c
index 2da00a701df2..423eec5ff3ad 100644
--- a/drivers/net/ethernet/marvell/octeon_ep/octep_main.c
+++ b/drivers/net/ethernet/marvell/octeon_ep/octep_main.c
@@ -1307,6 +1307,7 @@ static int octep_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	struct octep_device *octep_dev = NULL;
 	struct net_device *netdev;
+	int max_rx_pktlen;
 	int err;
 
 	err = pci_enable_device(pdev);
@@ -1377,8 +1378,15 @@ static int octep_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	netdev->hw_features = NETIF_F_SG;
 	netdev->features |= netdev->hw_features;
+
+	max_rx_pktlen = octep_ctrl_net_get_mtu(octep_dev, OCTEP_CTRL_NET_INVALID_VFID);
+	if (max_rx_pktlen < 0) {
+		dev_err(&octep_dev->pdev->dev,
+			"Failed to get max receive packet size; err = %d\n", max_rx_pktlen);
+		goto register_dev_err;
+	}
 	netdev->min_mtu = OCTEP_MIN_MTU;
-	netdev->max_mtu = OCTEP_MAX_MTU;
+	netdev->max_mtu = max_rx_pktlen - (ETH_HLEN + ETH_FCS_LEN);
 	netdev->mtu = OCTEP_DEFAULT_MTU;
 
 	err = octep_ctrl_net_get_mac_addr(octep_dev, OCTEP_CTRL_NET_INVALID_VFID,
-- 
2.25.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ