netdev - [PATCH net] net: phylink: set phy_state interface when attaching SFP

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <8abed37d01d427bf9d27a157860c54375c994ea1.1700887953.git.daniel@makrotopia.org>
Date: Sat, 25 Nov 2023 04:56:20 +0000
From: Daniel Golle <daniel@...rotopia.org>
To: Russell King <linux@...linux.org.uk>, Andrew Lunn <andrew@...n.ch>,
	Heiner Kallweit <hkallweit1@...il.com>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
	Marek Behún <kabel@...nel.org>,
	Pali Rohár <pali@...nel.org>,
	netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: Eric Woudstra <ericwouds@...il.com>, John Crispin <john@...ozen.org>
Subject: [PATCH net] net: phylink: set phy_state interface when attaching SFP

Assume 'usxgmii' being set as initial interface mode in DTS. Now plug
a 2.5GBase-T SFP module with exposed PHY. Currently this results in
a rather bizare situation:

RTL8221B-VB-CG 2.5Gbps PHY (C45) i2c:sfp1-wan:11: rtl822x_c45_get_features: supported=00,00000000,00008000,000080ef
mtk_soc_eth 15100000.ethernet eth2: requesting link mode phy/2500base-x with support 00,00000000,00008000,0000e0ef
mtk_soc_eth 15100000.ethernet eth2: switched to phy/2500base-x link mode   <<< !!!!!!
mtk_soc_eth 15100000.ethernet eth2: major config usxgmii    <<< !!!!!!
mtk_soc_eth 15100000.ethernet eth2: phylink_mac_config: mode=phy/usxgmii/none adv=00,00000000,00000000,00000000 pause=00
mtk_soc_eth 15100000.ethernet eth2: PHY [i2c:sfp1-wan:11] driver [RTL8221B-VB-CG 2.5Gbps PHY (C45)] (irq=POLL)
mtk_soc_eth 15100000.ethernet eth2: phy: 2500base-x setting supported 00,00000000,00008000,0000e0ef advertising 00,00000000,00008000,0000e0ef

Then the link seemingly comes up (but is dead) because no subsequent
call to phylink_major_config actually configured MAC and PCS for
2500base-x mode.

This is because phylink_mac_initial_config() considers
pl->phy_state.interface if in MLO_AN_PHY mode while
phylink_sfp_set_config() only sets pl->link_config.interface.

Also set pl->phy_state.interface in phylink_sfp_set_config().

Fixes: 31eb8907aa5b ("net: phylink: allow attaching phy for SFP modules on 802.3z mode")
Signed-off-by: Daniel Golle <daniel@...rotopia.org>
---
 drivers/net/phy/phylink.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index aa842634d5c2c..21ef77e4fe720 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -3056,6 +3056,7 @@ static void phylink_sfp_set_config(struct phylink *pl, u8 mode,
 	    pl->link_config.interface != state->interface) {
 		pl->cur_link_an_mode = mode;
 		pl->link_config.interface = state->interface;
+		pl->phy_state.interface = state->interface;
 
 		changed = true;
 
-- 
2.42.1