netdev - Re: [PATCH v6 3/6] net: phy: at803x: add QCA8084 ethernet phy support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <a324b7d4-5265-4766-814a-36c53a84f732@quicinc.com>
Date: Tue, 28 Nov 2023 17:50:41 +0800
From: Jie Luo <quic_luoj@...cinc.com>
To: "Russell King (Oracle)" <linux@...linux.org.uk>
CC: Andrew Lunn <andrew@...n.ch>, <davem@...emloft.net>, <edumazet@...gle.com>,
        <kuba@...nel.org>, <pabeni@...hat.com>, <robh+dt@...nel.org>,
        <krzysztof.kozlowski+dt@...aro.org>, <conor+dt@...nel.org>,
        <hkallweit1@...il.com>, <corbet@....net>, <netdev@...r.kernel.org>,
        <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <linux-doc@...r.kernel.org>
Subject: Re: [PATCH v6 3/6] net: phy: at803x: add QCA8084 ethernet phy support



On 11/28/2023 5:00 PM, Russell King (Oracle) wrote:
> On Tue, Nov 28, 2023 at 03:16:45PM +0800, Jie Luo wrote:
>>>> The interface mode is passed in the .config_init, which is configured
>>>> by the PCS driver, the hardware register is located in the PCS, this
>>>> driver will be pushed later.
>>>
>>> Is this the same as how the syqca807x works? Can the PCS driver be
>>> shared by these two drivers?
>>
>> I am not sure syqca807x, would you point me the code path of this driver?
>>
>>>
>>> What i don't like at the moment is that we have two driver
>>> developments going on at once for hardware which seems very similar,
>>> but no apparent cooperation?
>>>
>>> 	Andrew
>>
>> The PCS of qca8084 is the PHY PCS, which should be new PCS driver,
>> in the previous chips, we don't have this kind of PHY PCS.
> 
> No. PCS drivers are for MAC-side PCS drivers, not PHY-side PCS drivers.
> 
>                       +-------------
> 		     |     PHY
> MAC---PCS --- link --- PCS --- ...
>         ^             |  ^
>         |	     +--|----------
>    For this PCS          |
>                    Not for this PCS
> 

The PCS drivers in drivers/net/pcs/ should be in PHY side, such as
pcs-lynx.c and pcs-xpcs.c, they are configuring the MDIO device
registers.