[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <43255cdd-9e1e-472a-9263-04db0259b3cb@lunn.ch>
Date: Tue, 28 Nov 2023 01:51:05 +0100
From: Andrew Lunn <andrew@...n.ch>
To: Christian Marangi <ansuelsmth@...il.com>
Cc: Florian Fainelli <florian.fainelli@...adcom.com>,
Broadcom internal kernel review list <bcm-kernel-feedback-list@...adcom.com>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Vladimir Oltean <olteanv@...il.com>,
David Epping <david.epping@...singlinkelectronics.com>,
"Russell King (Oracle)" <rmk+kernel@...linux.org.uk>,
Harini Katakam <harini.katakam@....com>,
Simon Horman <horms@...nel.org>, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [net-next PATCH v2 4/4] net: phy: add support for PHY package
MMD read/write
On Mon, Nov 27, 2023 at 12:51:41AM +0100, Christian Marangi wrote:
> Some PHY in PHY package may require to read/write MMD regs to correctly
> configure the PHY package.
>
> Add support for these additional required function in both lock and no
> lock variant.
>
> It's possible to set is_c45 bool for phy_package_read/write to true to
> access mmd regs for accessing C45 PHY in PHY package for global
> configuration.
I would just use phydev->is_c45. I would be very surprised if you have
a package with some PHYs being only C22 and some C45.
>
> Signed-off-by: Christian Marangi <ansuelsmth@...il.com>
> ---
> Changes v2:
> - Rework to use newly introduced helper
> - Add common check for regnum and devad
>
> include/linux/phy.h | 78 +++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 78 insertions(+)
>
> diff --git a/include/linux/phy.h b/include/linux/phy.h
> index 96f6f34be051..3e507bd2c3b4 100644
> --- a/include/linux/phy.h
> +++ b/include/linux/phy.h
> @@ -2085,6 +2085,84 @@ static inline int __phy_package_write(struct phy_device *phydev,
> return __mdiobus_write(phydev->mdio.bus, addr, regnum, val);
> }
>
> +static inline int phy_package_read_mmd(struct phy_device *phydev,
> + unsigned int addr_offset, bool is_c45,
> + int devad, u32 regnum)
> +{
I also don't know why this should be in the header file?
Andrew
Powered by blists - more mailing lists