netdev - [PATCH v7 13/14] net: phy: at803x: configure qca8084 work mode

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20231214094813.24690-14-quic_luoj@quicinc.com>
Date: Thu, 14 Dec 2023 17:48:12 +0800
From: Luo Jie <quic_luoj@...cinc.com>
To: <andrew@...n.ch>, <davem@...emloft.net>, <edumazet@...gle.com>,
        <kuba@...nel.org>, <pabeni@...hat.com>, <robh+dt@...nel.org>,
        <krzysztof.kozlowski+dt@...aro.org>, <conor+dt@...nel.org>,
        <hkallweit1@...il.com>, <linux@...linux.org.uk>, <corbet@....net>,
        <p.zabel@...gutronix.de>, <f.fainelli@...il.com>
CC: <netdev@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>, <linux-doc@...r.kernel.org>
Subject: [PATCH v7 13/14] net: phy: at803x: configure qca8084 work mode

There are four kind of work modes supported by qca8084.
1. Quad PHYs work on 10g-qxgmii.
2. PHY1, PHY2, PHY3 wors on 10g-qxgmii, PHY4 works on sgmii.
3. Quad PHYs connected with internal MACs by GMII, which works
   on switch mode.
4. PHY1, PHY2, PHY3 connected with internal MACs by GMII, PHY4
   works on sgmii.

Signed-off-by: Luo Jie <quic_luoj@...cinc.com>
---
 drivers/net/phy/at803x.c | 53 +++++++++++++++++++++++++++++++++++++++-
 1 file changed, 52 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 4499d78891d2..6bc80704949a 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -317,6 +317,13 @@
 #define QCA8084_EPHY_ADDR3_MASK			GENMASK(19, 15)
 #define QCA8084_EPHY_LDO_EN			GENMASK(21, 20)
 
+#define QCA8084_WORK_MODE_CFG			0xc90f030
+#define QCA8084_WORK_MODE_MASK			GENMASK(5, 0)
+#define QCA8084_WORK_MODE_QXGMII		(BIT(5) | GENMASK(3, 0))
+#define QCA8084_WORK_MODE_QXGMII_PORT4_SGMII	(BIT(5) | GENMASK(2, 0))
+#define QCA8084_WORK_MODE_SWITCH		BIT(4)
+#define QCA8084_WORK_MODE_SWITCH_PORT4_SGMII	BIT(5)
+
 MODULE_DESCRIPTION("Qualcomm Atheros AR803x and QCA808X PHY driver");
 MODULE_AUTHOR("Matus Ujhelyi");
 MODULE_LICENSE("GPL");
@@ -1231,6 +1238,46 @@ static int qca8084_common_clock_init(struct phy_device *phydev)
 	return clk_prepare_enable(priv->clk[MDIO_MASTER_AHB_CLK]);
 }
 
+static int qca8084_parse_and_set_work_mode(struct phy_device *phydev)
+{
+	struct device_node *node;
+	struct at803x_priv *priv;
+	u32 value, work_mode;
+	int ret;
+
+	node = phydev->mdio.dev.of_node;
+	priv = phydev->priv;
+
+	/* The property "qcom,phy-work-mode" is only defined in one
+	 * PHY device tree node.
+	 */
+	ret = of_property_read_u32(node, "qcom,phy-work-mode", &value);
+	if (ret)
+		return ret == -EINVAL ? 0 : ret;
+
+	switch (value) {
+	case 0:
+		work_mode = QCA8084_WORK_MODE_QXGMII;
+		break;
+	case 1:
+		work_mode = QCA8084_WORK_MODE_QXGMII_PORT4_SGMII;
+		break;
+	case 2:
+		work_mode = QCA8084_WORK_MODE_SWITCH;
+		break;
+	case 3:
+		work_mode = QCA8084_WORK_MODE_SWITCH_PORT4_SGMII;
+		break;
+	default:
+		phydev_err(phydev, "invalid qcom,phy-work-mode %d\n", value);
+		return -EINVAL;
+	}
+
+	return qca8084_mii_modify(phydev, QCA8084_WORK_MODE_CFG,
+				  QCA8084_WORK_MODE_MASK,
+				  FIELD_PREP(QCA8084_WORK_MODE_MASK, work_mode));
+}
+
 static int qca8084_probe(struct phy_device *phydev)
 {
 	int ret;
@@ -1247,7 +1294,11 @@ static int qca8084_probe(struct phy_device *phydev)
 	if (ret)
 		return ret;
 
-	return qca8084_common_clock_init(phydev);
+	ret = qca8084_common_clock_init(phydev);
+	if (ret)
+		return ret;
+
+	return qca8084_parse_and_set_work_mode(phydev);
 }
 
 static int at803x_probe(struct phy_device *phydev)
-- 
2.42.0