[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20231214094813.24690-15-quic_luoj@quicinc.com>
Date: Thu, 14 Dec 2023 17:48:13 +0800
From: Luo Jie <quic_luoj@...cinc.com>
To: <andrew@...n.ch>, <davem@...emloft.net>, <edumazet@...gle.com>,
<kuba@...nel.org>, <pabeni@...hat.com>, <robh+dt@...nel.org>,
<krzysztof.kozlowski+dt@...aro.org>, <conor+dt@...nel.org>,
<hkallweit1@...il.com>, <linux@...linux.org.uk>, <corbet@....net>,
<p.zabel@...gutronix.de>, <f.fainelli@...il.com>
CC: <netdev@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-doc@...r.kernel.org>
Subject: [PATCH v7 14/14] dt-bindings: net: ar803x: add qca8084 PHY propetry
The following properties are added for qca8084 PHY.
1. add the compatible string "ethernet-phy-id004d.d180" since
the PHY device is not accessible during MDIO bus register.
2. add property "qcom,phy-addr-fixup" for customizing MDIO address.
3. add property "qcom,phy-work-mode" for specifying qca8084 PHY
work mode.
4. add the initial clocks and resets.
Signed-off-by: Luo Jie <quic_luoj@...cinc.com>
---
.../devicetree/bindings/net/qca,ar803x.yaml | 158 +++++++++++++++++-
1 file changed, 155 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/qca,ar803x.yaml b/Documentation/devicetree/bindings/net/qca,ar803x.yaml
index 3acd09f0da86..febff039a44f 100644
--- a/Documentation/devicetree/bindings/net/qca,ar803x.yaml
+++ b/Documentation/devicetree/bindings/net/qca,ar803x.yaml
@@ -14,9 +14,6 @@ maintainers:
description: |
Bindings for Qualcomm Atheros AR803x PHYs
-allOf:
- - $ref: ethernet-phy.yaml#
-
properties:
qca,clk-out-frequency:
description: Clock output frequency in Hertz.
@@ -85,6 +82,161 @@ properties:
$ref: /schemas/regulator/regulator.yaml
unevaluatedProperties: false
+ qcom,phy-addr-fixup:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description:
+ MDIO address for 4 PHY devices and 3 PCS devices
+
+ qcom,phy-work-mode:
+ description: PHY device work mode.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+
+ clocks:
+ items:
+ - description: APB bridge clock
+ - description: AHB clock
+ - description: Security control clock
+ - description: TLMM clock
+ - description: TLMM AHB clock
+ - description: CNOC AHB clock
+ - description: MDIO AHB clock
+ - description: MDIO master AHB clock
+ - description: PCS0 system clock
+ - description: PCS1 system clock
+ - description: EPHY0 system clock
+ - description: EPHY1 system clock
+ - description: EPHY2 system clock
+ - description: EPHY3 system clock
+ description: PHY initial common clock configs
+
+ clock-names:
+ items:
+ - const: apb_bridge
+ - const: ahb
+ - const: sec_ctrl_ahb
+ - const: tlmm
+ - const: tlmm_ahb
+ - const: cnoc_ahb
+ - const: mdio_ahb
+ - const: mdio_master_ahb
+ - const: srds0_sys
+ - const: srds1_sys
+ - const: gephy0_sys
+ - const: gephy1_sys
+ - const: gephy2_sys
+ - const: gephy3_sys
+
+ resets:
+ items:
+ - description: PCS0 system reset
+ - description: PCS1 system reset
+ - description: EPHY0 system reset
+ - description: EPHY1 system reset
+ - description: EPHY2 system reset
+ - description: EPHY3 system reset
+ - description: EPHY0 software reset
+ - description: EPHY1 software reset
+ - description: EPHY2 software reset
+ - description: EPHY3 software reset
+ - description: Ethernet DSP reset
+ description: PHY initial common reset configs
+
+ reset-names:
+ items:
+ - const: srds0_sys
+ - const: srds1_sys
+ - const: gephy0_sys
+ - const: gephy1_sys
+ - const: gephy2_sys
+ - const: gephy3_sys
+ - const: gephy0_soft
+ - const: gephy1_soft
+ - const: gephy2_soft
+ - const: gephy3_soft
+ - const: gephy_dsp
+
+allOf:
+ - $ref: ethernet-phy.yaml#
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - ethernet-phy-id004d.d180
+ then:
+ properties:
+ clocks:
+ items:
+ - description: APB bridge clock
+ - description: AHB clock
+ - description: Security control clock
+ - description: TLMM clock
+ - description: TLMM AHB clock
+ - description: CNOC AHB clock
+ - description: MDIO AHB clock
+ - description: MDIO master AHB clock
+ - description: PCS0 system clock
+ - description: PCS1 system clock
+ - description: EPHY0 system clock
+ - description: EPHY1 system clock
+ - description: EPHY2 system clock
+ - description: EPHY3 system clock
+ clock-names:
+ items:
+ - const: apb_bridge
+ - const: ahb
+ - const: sec_ctrl_ahb
+ - const: tlmm
+ - const: tlmm_ahb
+ - const: cnoc_ahb
+ - const: mdio_ahb
+ - const: mdio_master_ahb
+ - const: srds0_sys
+ - const: srds1_sys
+ - const: gephy0_sys
+ - const: gephy1_sys
+ - const: gephy2_sys
+ - const: gephy3_sys
+ resets:
+ items:
+ - description: PCS0 system reset
+ - description: PCS1 system reset
+ - description: EPHY0 system reset
+ - description: EPHY1 system reset
+ - description: EPHY2 system reset
+ - description: EPHY3 system reset
+ - description: EPHY0 software reset
+ - description: EPHY1 software reset
+ - description: EPHY2 software reset
+ - description: EPHY3 software reset
+ - description: Ethernet DSP reset
+ reset-names:
+ items:
+ - const: srds0_sys
+ - const: srds1_sys
+ - const: gephy0_sys
+ - const: gephy1_sys
+ - const: gephy2_sys
+ - const: gephy3_sys
+ - const: gephy0_soft
+ - const: gephy1_soft
+ - const: gephy2_soft
+ - const: gephy3_soft
+ - const: gephy_dsp
+ required:
+ - qcom,phy-addr-fixup
+ - qcom,phy-work-mode
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+ else:
+ properties:
+ qcom,phy-addr-fixup: false
+ qcom,phy-work-mode: false
+
unevaluatedProperties: false
examples:
--
2.42.0
Powered by blists - more mailing lists