lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20231214110448.lycg7yusrusbd7w2@skbuf>
Date: Thu, 14 Dec 2023 13:04:48 +0200
From: Vladimir Oltean <vladimir.oltean@....com>
To: Roger Quadros <rogerq@...nel.org>
Cc: davem@...emloft.net, edumazet@...gle.com, kuba@...nel.org,
	pabeni@...hat.com, shuah@...nel.org, s-vadapalli@...com,
	r-gunasekaran@...com, vigneshr@...com, srk@...com, horms@...nel.org,
	p-varis@...com, netdev@...r.kernel.org,
	linux-kernel@...r.kernel.org
Subject: Re: [PATCH v8 net-next 09/11] net: ethernet: ti: am65-cpsw-qos: Add
 Frame Preemption MAC Merge support

On Wed, Dec 13, 2023 at 01:07:19PM +0200, Roger Quadros wrote:
> - Fix am65_cpsw_iet_get_verify_timeout_ms() to default to timeout for
>   1G link if link is inactive.
> +
> +static int am65_cpsw_set_mm(struct net_device *ndev, struct ethtool_mm_cfg *cfg,
> +			    struct netlink_ext_ack *extack)
> +{
> +	val = readl(port->port_base + AM65_CPSW_PN_REG_IET_CTRL);
> +	if (cfg->verify_enabled) {
> +		val &= ~AM65_CPSW_PN_IET_MAC_DISABLEVERIFY;
> +		/* Reset Verify state machine. Verification won't start here.
> +		 * Verification will be done once link-up.
> +		 */
> +		val |= AM65_CPSW_PN_IET_MAC_LINKFAIL;
> +	} else {
> +		val |= AM65_CPSW_PN_IET_MAC_DISABLEVERIFY;
> +		/* Clear LINKFAIL to allow verify/response packets */
> +		val &= ~AM65_CPSW_PN_IET_MAC_LINKFAIL;
> +	}
> +
> +	val &= ~AM65_CPSW_PN_IET_MAC_MAC_ADDFRAGSIZE_MASK;
> +	val |= AM65_CPSW_PN_IET_MAC_SET_ADDFRAGSIZE(add_frag_size);
> +	writel(val, port->port_base + AM65_CPSW_PN_REG_IET_CTRL);
> +
> +	/* verify_timeout_count can only be set at valid link */
> +	if (cfg->verify_time > 0)
> +		port->qos.iet.verify_time_ms = cfg->verify_time;
> +	else
> +		port->qos.iet.verify_time_ms = 10;

I don't think I understand what the check is for? The netlink policy for
ETHTOOL_A_MM_VERIFY_TIME limits the range between 1 ms and 128 ms.
How can it be 0?

> +
> +	/* enable/disable preemption based on link status */
> +	am65_cpsw_iet_commit_preemptible_tcs(port);
> +
> +	return 0;
> +}

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ