[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20231214110648.n7rz2i7qobikavtp@skbuf>
Date: Thu, 14 Dec 2023 13:06:48 +0200
From: Vladimir Oltean <vladimir.oltean@....com>
To: Roger Quadros <rogerq@...nel.org>
Cc: davem@...emloft.net, edumazet@...gle.com, kuba@...nel.org,
pabeni@...hat.com, shuah@...nel.org, s-vadapalli@...com,
r-gunasekaran@...com, vigneshr@...com, srk@...com, horms@...nel.org,
p-varis@...com, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v8 net-next 08/11] net: ethernet: ti: am65-cpsw: add
mqprio qdisc offload in channel mode
On Wed, Dec 13, 2023 at 01:07:18PM +0200, Roger Quadros wrote:
> + for (i = num_tc - 1; i >= 0; i--) {
> + u32 ch_msk;
> +
> + if (mqprio->min_rate[i])
> + min_rate_msk |= BIT(i);
> + min_rate_total += mqprio->min_rate[i];
> +
> + if (has_max_rate) {
> + if (mqprio->max_rate[i])
> + max_rate_msk |= BIT(i);
> + max_rate_total += mqprio->max_rate[i];
> +
> + if (!mqprio->min_rate[i] && mqprio->max_rate[i]) {
> + NL_SET_ERR_MSG_FMT_MOD(extack,
> + "TX tc%d rate max>0 but min=0\n",
> + i);
> + return -EINVAL;
> + }
> +
> + if (mqprio->max_rate[i] &&
> + mqprio->max_rate[i] < mqprio->min_rate[i]) {
> + NL_SET_ERR_MSG_FMT_MOD(extack,
> + "TX tc%d rate min(%llu)>max(%llu)\n",
> + i, mqprio->min_rate[i],
> + mqprio->max_rate[i]);
> + return -EINVAL;
> + }
> + }
> +
> + ch_msk = GENMASK(num_tc - 1, i);
> + if ((min_rate_msk & BIT(i)) && (min_rate_msk ^ ch_msk)) {
> + NL_SET_ERR_MSG_FMT_MOD(extack,
> + "Min rate must be set sequentially hi->lo tx_rate_msk%x\n",
> + min_rate_msk);
> + return -EINVAL;
> + }
> +
> + if ((max_rate_msk & BIT(i)) && (max_rate_msk ^ ch_msk)) {
> + NL_SET_ERR_MSG_FMT_MOD(extack,
> + "Max rate must be set sequentially hi->lo tx_rate_msk%x\n",
> + max_rate_msk);
> + return -EINVAL;
> + }
> + }
Netlink extack strings don't need \n at the end.
Powered by blists - more mailing lists