[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <44229f07-de98-4b47-a125-3301be185de6@loongson.cn>
Date: Thu, 25 Jan 2024 16:36:39 +0800
From: Yanteng Si <siyanteng@...ngson.cn>
To: Serge Semin <fancer.lancer@...il.com>
Cc: andrew@...n.ch, hkallweit1@...il.com, peppe.cavallaro@...com,
alexandre.torgue@...s.st.com, joabreu@...opsys.com, Jose.Abreu@...opsys.com,
chenhuacai@...ngson.cn, linux@...linux.org.uk, guyinggang@...ngson.cn,
netdev@...r.kernel.org, chris.chenfeiyang@...il.com
Subject: Re: [PATCH net-next v7 7/9] net: stmmac: dwmac-loongson: Add GNET
support
在 2024/1/24 21:51, Serge Semin 写道:
> On Wed, Jan 24, 2024 at 05:21:03PM +0800, Yanteng Si wrote:
>> 在 2024/1/1 15:27, Yanteng Si 写道:
>>> 在 2023/12/21 10:34, Serge Semin 写道:
>>>> On Tue, Dec 19, 2023 at 10:26:47PM +0800, Yanteng Si wrote:
>>>>> Add Loongson GNET (GMAC with PHY) support. Current GNET does not
>>>>> support
>>>>> half duplex mode, and GNET on LS7A only supports ANE when speed
>>>>> is set to
>>>>> 1000M.
>>>>>
>>>>> Signed-off-by: Yanteng Si <siyanteng@...ngson.cn>
>>>>> Signed-off-by: Feiyang Chen <chenfeiyang@...ngson.cn>
>>>>> Signed-off-by: Yinggang Gu <guyinggang@...ngson.cn>
>>>>> ---
>>>>> .../ethernet/stmicro/stmmac/dwmac-loongson.c | 79
>>>>> +++++++++++++++++++
>>>>> .../ethernet/stmicro/stmmac/stmmac_ethtool.c | 6 ++
>>>>> include/linux/stmmac.h | 2 +
>>>>> 3 files changed, 87 insertions(+)
>>>>>
>>>>> diff --git
>>>>> a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
>>>>> b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
>>>>> index 2c08d5495214..9e4953c7e4e0 100644
>>>>> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
>>>>> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
>>>>> @@ -168,6 +168,83 @@ static struct stmmac_pci_info
>>>>> loongson_gmac_pci_info = {
>>>>> .config = loongson_gmac_config,
>>>>> };
>>>>> +static void loongson_gnet_fix_speed(void *priv, unsigned int
>>>>> speed, unsigned int mode)
>>>>> +{
>>>>> + struct net_device *ndev = dev_get_drvdata(priv);
>>>>> + struct stmmac_priv *ptr = netdev_priv(ndev);
>>>>> +
>>>>> + /* The controller and PHY don't work well together.
>>>>> + * We need to use the PS bit to check if the controller's status
>>>>> + * is correct and reset PHY if necessary.
>>>>> + */
>>>>> + if (speed == SPEED_1000)
>>>>> + if (readl(ptr->ioaddr + MAC_CTRL_REG) & (1 << 15) /* PS */)
>>>>> + phy_restart_aneg(ndev->phydev);
>>>> {} around the outer if please.
>>> OK.
>>>>> +}
>>>>> +
>>>>> +static int loongson_gnet_data(struct pci_dev *pdev,
>>>>> + struct plat_stmmacenet_data *plat)
>>>>> +{
>>>>> + loongson_default_data(pdev, plat);
>>>>> +
>>>>> + plat->multicast_filter_bins = 256;
>>>>> +
>>>>> + plat->mdio_bus_data->phy_mask = 0xfffffffb;
>>>> ~BIT(2)?
>>> I still need to confirm, please allow me to get back to you later.
>> Yes, that's fine.
Oops! A warning will be output:
drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c: In function
'loongson_gnet_data':
drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c:463:41: warning:
conversion from
'long unsigned int' to 'unsigned int' changes value from
'18446744073709551611' to '4294967291' [-Woverflow]
463 | plat->mdio_bus_data->phy_mask = ~BIT(2);
| ^
Unfortunately, we don't have an unsigned int macro for BIT(nr).
Thanks,
Yanteng
>
> -Serge(y)
>
>>
>> Thanks,
>>
>> Yanteng
>>
>>
>>>>> +
>>>>> + plat->phy_addr = 2;
>>>>> + plat->phy_interface = PHY_INTERFACE_MODE_INTERNAL;
>>>>> +
>>>>> + plat->bsp_priv = &pdev->dev;
>>>>> + plat->fix_mac_speed = loongson_gnet_fix_speed;
>>>>> +
>>>>> + plat->dma_cfg->pbl = 32;
>>>>> + plat->dma_cfg->pblx8 = true;
>>>>> +
>>>>> + plat->clk_ref_rate = 125000000;
>>>>> + plat->clk_ptp_rate = 125000000;
>>>>> +
>>>>> + return 0;
>>>>> +}
>>>>> +
>>>>> +static int loongson_gnet_config(struct pci_dev *pdev,
>>>>> + struct plat_stmmacenet_data *plat,
>>>>> + struct stmmac_resources *res,
>>>>> + struct device_node *np)
>>>>> +{
>>>>> + int ret;
>>>>> + u32 version = readl(res->addr + GMAC_VERSION);
>>>>> +
>>>>> + switch (version & 0xff) {
>>>>> + case DWLGMAC_CORE_1_00:
>>>>> + ret = loongson_dwmac_config_multi_msi(pdev, plat, res, np, 8);
>>>>> + break;
>>>>> + default:
>>>>> + ret = loongson_dwmac_config_legacy(pdev, plat, res, np);
>>>> Hm, do you have two versions of Loongson GNET? What does the second
>>> Yes.
>>>> one contain in the GMAC_VERSION register then? Can't you distinguish
>>>> them by the PCI IDs (device, subsystem, revision)?
>>> I'm afraid that's not possible.
>>>
>>> Because they have the same pci id and revision.
>>>
>>>
>>> Thanks,
>>>
>>> Yanteng
>>>
>>>> -Serge(y)
>>>>
>>>>> + break;
>>>>> + }
>>>>> +
>>>>> + switch (pdev->revision) {
>>>>> + case 0x00:
>>>>> + plat->flags |=
>>>>> + FIELD_PREP(STMMAC_FLAG_DISABLE_HALF_DUPLEX, 1) |
>>>>> + FIELD_PREP(STMMAC_FLAG_DISABLE_FORCE_1000, 1);
>>>>> + break;
>>>>> + case 0x01:
>>>>> + plat->flags |=
>>>>> + FIELD_PREP(STMMAC_FLAG_DISABLE_HALF_DUPLEX, 1);
>>>>> + break;
>>>>> + default:
>>>>> + break;
>>>>> + }
>>>>> +
>>>>> + return ret;
>>>>> +}
>>>>> +
>>>>> +static struct stmmac_pci_info loongson_gnet_pci_info = {
>>>>> + .setup = loongson_gnet_data,
>>>>> + .config = loongson_gnet_config,
>>>>> +};
>>>>> +
>>>>> static int loongson_dwmac_probe(struct pci_dev *pdev,
>>>>> const struct pci_device_id *id)
>>>>> {
>>>>> @@ -318,9 +395,11 @@ static
>>>>> SIMPLE_DEV_PM_OPS(loongson_dwmac_pm_ops, loongson_dwmac_suspend,
>>>>> loongson_dwmac_resume);
>>>>> #define PCI_DEVICE_ID_LOONGSON_GMAC 0x7a03
>>>>> +#define PCI_DEVICE_ID_LOONGSON_GNET 0x7a13
>>>>> static const struct pci_device_id loongson_dwmac_id_table[] = {
>>>>> { PCI_DEVICE_DATA(LOONGSON, GMAC, &loongson_gmac_pci_info) },
>>>>> + { PCI_DEVICE_DATA(LOONGSON, GNET, &loongson_gnet_pci_info) },
>>>>> {}
>>>>> };
>>>>> MODULE_DEVICE_TABLE(pci, loongson_dwmac_id_table);
>>>>> diff --git
>>>>> a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
>>>>> b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
>>>>> index 8105ce47c6ad..d6939eb9a0d8 100644
>>>>> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
>>>>> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
>>>>> @@ -420,6 +420,12 @@ stmmac_ethtool_set_link_ksettings(struct
>>>>> net_device *dev,
>>>>> return 0;
>>>>> }
>>>>> + if (FIELD_GET(STMMAC_FLAG_DISABLE_FORCE_1000,
>>>>> priv->plat->flags)) {
>>>>> + if (cmd->base.speed == SPEED_1000 &&
>>>>> + cmd->base.autoneg != AUTONEG_ENABLE)
>>>>> + return -EOPNOTSUPP;
>>>>> + }
>>>>> +
>>>>> return phylink_ethtool_ksettings_set(priv->phylink, cmd);
>>>>> }
>>>>> diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
>>>>> index f07f79d50b06..067030cdb60f 100644
>>>>> --- a/include/linux/stmmac.h
>>>>> +++ b/include/linux/stmmac.h
>>>>> @@ -222,6 +222,8 @@ struct dwmac4_addrs {
>>>>> #define STMMAC_FLAG_EN_TX_LPI_CLOCKGATING BIT(11)
>>>>> #define STMMAC_FLAG_HWTSTAMP_CORRECT_LATENCY BIT(12)
>>>>> #define STMMAC_FLAG_HAS_LGMAC BIT(13)
>>>>> +#define STMMAC_FLAG_DISABLE_HALF_DUPLEX BIT(14)
>>>>> +#define STMMAC_FLAG_DISABLE_FORCE_1000 BIT(15)
>>>>> struct plat_stmmacenet_data {
>>>>> int bus_id;
>>>>> --
>>>>> 2.31.4
>>>>>
Powered by blists - more mailing lists