| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 9 Feb 2024 17:12:33 -0500
From: jmaloy@...hat.com
To: netdev@...r.kernel.org,
davem@...emloft.net
Cc: kuba@...nel.org,
passt-dev@...st.top,
jmaloy@...hat.com,
sbrivio@...hat.com,
lvivier@...hat.com,
dgibson@...hat.com,
Paolo Abeni <pabeni@...hat.com>
Subject: [PATCH v3] tcp: add support for SO_PEEK_OFF
From: Jon Maloy <jmaloy@...hat.com>
When reading received messages from a socket with MSG_PEEK, we may want
to read the contents with an offset, like we can do with pread/preadv()
when reading files. Currently, it is not possible to do that.
In this commit, we add support for the SO_PEEK_OFF socket option for TCP,
in a similar way it is done for Unix Domain sockets.
In the iperf3 log examples shown below, we can observe a throughput
improvement of 15-20 % in the direction host->namespace when using the
protocol splicer 'pasta' (https://passt.top).
This is a consistent result.
pasta(1) and passt(1) implement user-mode networking for network
namespaces (containers) and virtual machines by means of a translation
layer between Layer-2 network interface and native Layer-4 sockets
(TCP, UDP, ICMP/ICMPv6 echo).
Received, pending TCP data to the container/guest is kept in kernel
buffers until acknowledged, so the tool routinely needs to fetch new
data from socket, skipping data that was already sent.
At the moment this is implemented using a dummy buffer passed to
recvmsg(). With this change, we don't need a dummy buffer and the
related buffer copy (copy_to_user()) anymore.
passt and pasta are supported in KubeVirt and libvirt/qemu.
jmaloy@...yr:~/passt$ perf record -g ./pasta --config-net -f
SO_PEEK_OFF not supported by kernel.
jmaloy@...yr:~/passt# iperf3 -s
-----------------------------------------------------------
Server listening on 5201 (test #1)
-----------------------------------------------------------
Accepted connection from 192.168.122.1, port 44822
[ 5] local 192.168.122.180 port 5201 connected to 192.168.122.1 port 44832
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 1.02 GBytes 8.78 Gbits/sec
[ 5] 1.00-2.00 sec 1.06 GBytes 9.08 Gbits/sec
[ 5] 2.00-3.00 sec 1.07 GBytes 9.15 Gbits/sec
[ 5] 3.00-4.00 sec 1.10 GBytes 9.46 Gbits/sec
[ 5] 4.00-5.00 sec 1.03 GBytes 8.85 Gbits/sec
[ 5] 5.00-6.00 sec 1.10 GBytes 9.44 Gbits/sec
[ 5] 6.00-7.00 sec 1.11 GBytes 9.56 Gbits/sec
[ 5] 7.00-8.00 sec 1.07 GBytes 9.20 Gbits/sec
[ 5] 8.00-9.00 sec 667 MBytes 5.59 Gbits/sec
[ 5] 9.00-10.00 sec 1.03 GBytes 8.83 Gbits/sec
[ 5] 10.00-10.04 sec 30.1 MBytes 6.36 Gbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate
[ 5] 0.00-10.04 sec 10.3 GBytes 8.78 Gbits/sec receiver
-----------------------------------------------------------
Server listening on 5201 (test #2)
-----------------------------------------------------------
^Ciperf3: interrupt - the server has terminated
jmaloy@...yr:~/passt#
logout
[ perf record: Woken up 23 times to write data ]
[ perf record: Captured and wrote 5.696 MB perf.data (35580 samples) ]
jmaloy@...yr:~/passt$
jmaloy@...yr:~/passt$ perf record -g ./pasta --config-net -f
SO_PEEK_OFF supported by kernel.
jmaloy@...yr:~/passt# iperf3 -s
-----------------------------------------------------------
Server listening on 5201 (test #1)
-----------------------------------------------------------
Accepted connection from 192.168.122.1, port 52084
[ 5] local 192.168.122.180 port 5201 connected to 192.168.122.1 port 52098
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 1.32 GBytes 11.3 Gbits/sec
[ 5] 1.00-2.00 sec 1.19 GBytes 10.2 Gbits/sec
[ 5] 2.00-3.00 sec 1.26 GBytes 10.8 Gbits/sec
[ 5] 3.00-4.00 sec 1.36 GBytes 11.7 Gbits/sec
[ 5] 4.00-5.00 sec 1.33 GBytes 11.4 Gbits/sec
[ 5] 5.00-6.00 sec 1.21 GBytes 10.4 Gbits/sec
[ 5] 6.00-7.00 sec 1.31 GBytes 11.2 Gbits/sec
[ 5] 7.00-8.00 sec 1.25 GBytes 10.7 Gbits/sec
[ 5] 8.00-9.00 sec 1.33 GBytes 11.5 Gbits/sec
[ 5] 9.00-10.00 sec 1.24 GBytes 10.7 Gbits/sec
[ 5] 10.00-10.04 sec 56.0 MBytes 12.1 Gbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate
[ 5] 0.00-10.04 sec 12.9 GBytes 11.0 Gbits/sec receiver
-----------------------------------------------------------
Server listening on 5201 (test #2)
-----------------------------------------------------------
^Ciperf3: interrupt - the server has terminated
logout
[ perf record: Woken up 20 times to write data ]
[ perf record: Captured and wrote 5.040 MB perf.data (33411 samples) ]
jmaloy@...yr:~/passt$
The perf record confirms this result. Below, we can observe that the
CPU spends significantly less time in the function ____sys_recvmsg()
when we have offset support.
Without offset support:
----------------------
jmaloy@...yr:~/passt$ perf report -q --symbol-filter=do_syscall_64 \
-p ____sys_recvmsg -x --stdio -i perf.data | head -1
46.32% 0.00% passt.avx2 [kernel.vmlinux] [k] do_syscall_64 ____sys_recvmsg
With offset support:
----------------------
jmaloy@...yr:~/passt$ perf report -q --symbol-filter=do_syscall_64 \
-p ____sys_recvmsg -x --stdio -i perf.data | head -1
28.12% 0.00% passt.avx2 [kernel.vmlinux] [k] do_syscall_64 ____sys_recvmsg
Suggested-by: Paolo Abeni <pabeni@...hat.com>
Signed-off-by: Jon Maloy <jmaloy@...hat.com>
---
v3: - Applied changes suggested by Stefano Brivio and Paolo Abeni
---
net/ipv4/af_inet.c | 1 +
net/ipv4/tcp.c | 16 ++++++++++------
2 files changed, 11 insertions(+), 6 deletions(-)
diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c
index 4e635dd3d3c8..5f0e5d10c416 100644
--- a/net/ipv4/af_inet.c
+++ b/net/ipv4/af_inet.c
@@ -1071,6 +1071,7 @@ const struct proto_ops inet_stream_ops = {
#endif
.splice_eof = inet_splice_eof,
.splice_read = tcp_splice_read,
+ .set_peek_off = sk_set_peek_off,
.read_sock = tcp_read_sock,
.read_skb = tcp_read_skb,
.sendmsg_locked = tcp_sendmsg_locked,
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 7e2481b9eae1..1c8cab14a32c 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -1415,8 +1415,6 @@ static int tcp_peek_sndq(struct sock *sk, struct msghdr *msg, int len)
struct sk_buff *skb;
int copied = 0, err = 0;
- /* XXX -- need to support SO_PEEK_OFF */
-
skb_rbtree_walk(skb, &sk->tcp_rtx_queue) {
err = skb_copy_datagram_msg(skb, 0, msg, skb->len);
if (err)
@@ -2327,6 +2325,7 @@ static int tcp_recvmsg_locked(struct sock *sk, struct msghdr *msg, size_t len,
int target; /* Read at least this many bytes */
long timeo;
struct sk_buff *skb, *last;
+ u32 peek_offset = 0;
u32 urg_hole = 0;
err = -ENOTCONN;
@@ -2360,7 +2359,8 @@ static int tcp_recvmsg_locked(struct sock *sk, struct msghdr *msg, size_t len,
seq = &tp->copied_seq;
if (flags & MSG_PEEK) {
- peek_seq = tp->copied_seq;
+ peek_offset = max(sk_peek_offset(sk, flags), 0);
+ peek_seq = tp->copied_seq + peek_offset;
seq = &peek_seq;
}
@@ -2463,11 +2463,11 @@ static int tcp_recvmsg_locked(struct sock *sk, struct msghdr *msg, size_t len,
}
if ((flags & MSG_PEEK) &&
- (peek_seq - copied - urg_hole != tp->copied_seq)) {
+ (peek_seq - peek_offset - copied - urg_hole != tp->copied_seq)) {
net_dbg_ratelimited("TCP(%s:%d): Application bug, race in MSG_PEEK\n",
current->comm,
task_pid_nr(current));
- peek_seq = tp->copied_seq;
+ peek_seq = tp->copied_seq + peek_offset;
}
continue;
@@ -2508,7 +2508,10 @@ static int tcp_recvmsg_locked(struct sock *sk, struct msghdr *msg, size_t len,
WRITE_ONCE(*seq, *seq + used);
copied += used;
len -= used;
-
+ if (flags & MSG_PEEK)
+ sk_peek_offset_fwd(sk, used);
+ else
+ sk_peek_offset_bwd(sk, used);
tcp_rcv_space_adjust(sk);
skip_copy:
@@ -3007,6 +3010,7 @@ int tcp_disconnect(struct sock *sk, int flags)
__skb_queue_purge(&sk->sk_receive_queue);
WRITE_ONCE(tp->copied_seq, tp->rcv_nxt);
WRITE_ONCE(tp->urg_data, 0);
+ sk_set_peek_off(sk, -1);
tcp_write_queue_purge(sk);
tcp_fastopen_active_disable_ofo_check(sk);
skb_rbtree_purge(&tp->out_of_order_queue);
--
2.42.0
Powered by blists - more mailing lists