lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <99a883c8-ccf2-4e52-9c34-ead59cd84117@bp.renesas.com>
Date: Mon, 12 Feb 2024 11:52:09 +0000
From: Paul Barker <paul.barker.ct@...renesas.com>
To: Sergey Shtylyov <s.shtylyov@....ru>,
 "David S . Miller" <davem@...emloft.net>, Eric Dumazet
 <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>,
 Paolo Abeni <pabeni@...hat.com>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>,
 Wolfram Sang <wsa+renesas@...g-engineering.com>, netdev@...r.kernel.org,
 linux-renesas-soc@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [RFC PATCH net-next v2 0/7] Improve GbEth performance on Renesas
 RZ/G2L and related SoCs

On 10/02/2024 19:36, Sergey Shtylyov wrote:
> On 2/6/24 12:19 PM, Paul Barker wrote:
> 
>> This series aims to improve peformance of the GbEth IP in the Renesas
> 
>    You didn't fix the typo in "peformance"... :-/
> 
>> RZ/G2L SoC family and the RZ/G3S SoC, which use the ravb driver. Along
>> the way, we do some refactoring and ensure that napi_complete_done() is
>> used in accordance with the NAPI documentation for both GbEth and R-Car
>> code paths.
>>
>> Performance improvment mainly comes from enabling SW IRQ Coalescing for
> 
>    And in "improvment" too... :-/

I'll fix this and the above type in v3.

> 
>> all SoCs using the GbEth IP, and NAPI Threaded mode for single core SoCs
>> using the GbEth IP. These can be enabled/disabled at runtime via sysfs,
>> but our goal is to set sensible defaults which get good performance on
>> the affected SoCs.
>>
>> The performance impact of this series on iperf3 testing is as follows:
>>   * RZ/G2L Ethernet throughput is unchanged, but CPU usage drops:
>>       * Bidirectional and TCP RX: 6.5% less CPU usage
>>       * UDP RX: 10% less CPU usage
>>
>>   * RZ/G2UL and RZ/G3S Ethernet throughput is increased for all test
>>     cases except UDP TX, which suffers a slight loss:
>>       * TCP TX: 32% more throughput
>>       * TCP RX: 11% more throughput
>>       * UDP TX: 10% less throughput
>>       * UDP RX: 10183% more throughput - the previous throughput of
> 
>    So this is a real figure? I thought you forgot to erase 10... :-)

Yes, throughput went from 1.06Mbps to 109Mbps for the RZ/G2UL with these
changes.

Initial testing shows that goes up again to 485Mbps with the next patch
series I'm working on to reduce RX buffer sizes.

Biju's work on checksum offload also helps a lot with these numbers, I
can't take all the credit.

> 
>>         1.06Mbps is what prompted this work.
>>
>>   * RZ/G2N CPU usage and Ethernet throughput is unchanged (tested as a
>>     representative of the SoCs which use the R-Car based RAVB IP).
>>
>> This series depends on:
>>   * "net: ravb: Let IP-specific receive function to interrogate descriptors" v6
>>     https://lore.kernel.org/all/20240202084136.3426492-2-claudiu.beznea.uj@bp.renesas.com/
> 
>    This one has been merged now, so you can drop RFC...
> 
>> To get the results shown above, you'll also need:
>>   * "topology: Set capacity_freq_ref in all cases"
>>     https://lore.kernel.org/all/20240117190545.596057-1-vincent.guittot@linaro.org/
>>
>>   * "ravb: Add Rx checksum offload support" v4
>>     https://lore.kernel.org/all/20240203142559.130466-2-biju.das.jz@bp.renesas.com/
>>
>>   * "ravb: Add Tx checksum offload support" v4
>>     https://lore.kernel.org/all/20240203142559.130466-3-biju.das.jz@bp.renesas.com/
> 
>    These two have been merged too...
> 
>> Work in this area will continue, in particular we expect to improve
>> TCP/UDP RX performance further with future changes to RX buffer
>> handling.
>>
>> Changes v1->v2:
>>   * Marked as RFC as the series depends on unmerged patches.
>>   * Refactored R-Car code paths as well as GbEth code paths.
>>   * Updated references to the patches this series depends on.
>>
>> Paul Barker (7):
>>   net: ravb: Simplify poll & receive functions
> 
>    The below 3 commits fix issues in the GbEth code, so should
> be redone against net.git and posted separately from this series...
> 
>>   net: ravb: Count packets instead of descriptors in RX path
>>   net: ravb: Always process TX descriptor ring
>>   net: ravb: Always update error counters

I'll split out and re-submit these as bug fixes. "net: ravb: Count
packets instead of descriptors in RX path" will require a bit of rework
so it doesn't depend on the first patch of the series ("net: ravb:
Simplify poll & receive functions") so you'll probably want to re-review
when I send it.

Then I'll re-send the rest as a non-RFC series.

> 
> [...]
> 
> MBR, Sergey

Thanks for the review!
Paul
Download attachment "OpenPGP_0x27F4B3459F002257.asc" of type "application/pgp-keys" (3521 bytes)

Download attachment "OpenPGP_signature.asc" of type "application/pgp-signature" (237 bytes)

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ