lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240228022243.17762-1-quic_bqiang@quicinc.com>
Date: Wed, 28 Feb 2024 10:22:40 +0800
From: Baochen Qiang <quic_bqiang@...cinc.com>
To: <ath11k@...ts.infradead.org>, <manivannan.sadhasivam@...aro.org>
CC: <linux-wireless@...r.kernel.org>, <linux-arm-msm@...r.kernel.org>,
        <mhi@...ts.linux.dev>, <quic_bqiang@...cinc.com>,
        <davem@...emloft.net>, <edumazet@...gle.com>, <kuba@...nel.org>,
        <pabeni@...hat.com>, <netdev@...r.kernel.org>
Subject: [PATCH v4 0/3] wifi: ath11k: hibernation support

Currently in ath11k we keep the firmware running on the WLAN device when the
network interface (wlan0) is down. The problem is that this will break
hibernation, obviously the firmware can't be running after the whole system is
powered off. To power down the ath11k firmware for suspend/hibernation some
changes both in MHI subsystem and ath11k are needed.

This patchset fixes a longstanding bug report about broken hibernation support:

https://bugzilla.kernel.org/show_bug.cgi?id=214649

There already is an RFC version which has been tested by multiple users with
positive results:

https://patchwork.kernel.org/project/linux-wireless/cover/20231127162022.518834-1-kvalo@kernel.org/

Basically the RFC version adds two APIs to MHI stack: with the first one ath11k
is able to keep MHI devices when going to suspend/hibernation, getting us rid of
the probe deferral issue when resume back. while with the second one ath11k could
manually prepare/unprepare MHI channels by itself, which is needed because QRTR
doesn't probe those channels automatically in this case.

Mani, the MHI maintainer, firstly doesn't like that version and insists that an
MHI device should be destroyed when suspend/hibernation, according to his
understanding on device driver model. See

https://lore.kernel.org/mhi/20231127162022.518834-1-kvalo@kernel.org/

After a long discussion Mani thought we might need a new PM callback with which
ath11k is able to wait until kernel unblocks device probe and thus MHI channels
get probed. So we came to the kernel PM list and there Mani realized that his
understanding is not correct so he finally agrees to keep MHI device during
suspend/hibernation. See

https://lore.kernel.org/all/21cd2098-97e1-4947-a5bb-a97582902ead@quicinc.com/

Mani also pointed out that an MHI controller driver (ath11k here) should not touch
MHI channels directly because those channels are managed by the corresponding MHI
client driver (QRTR here). To address this, we come up with this version.

Compared with that RFC version, this version adds PM callbacks in QRTR module:
suspend callback unprepares MHI channels during suspend and resume callback
prepares those channels during resume. In this way ath11k doesn't need to do
unprepare/prepare work by itself so those two APIs added in RFC version are
removed now.

The power down/up procedure requires a specific sequence in which PM callbacks
of wiphy, ath11k and QRTR are called, this is achieved by exploiting the
child-father relationship between their device struct, and also the PM framework
which separates whole suspend/resume process into several stages. Details in
patch [3/3].

v4:
 - resend v3 as v4 to CC netdev folks. No changes in patches themselves.

v3:
 - skip QRTR suspend/resume if MHI device is found to be in suspend state.

v2:
 - add comment on why destroying the device is optional in
   mhi_pm_disable_transition().
 - rename mhi_power_down_no_destroy() as mhi_power_down_keep_dev().
 - refine API description of mhi_power_down() and
   mhi_power_down_keep_dev().
 - add/remove __maybe_unused to QRTR PM callbacks.
 - remove '#ifdef CONFIG_PM'.
 - refine commit log of patch 1/3 and 2/3.

Baochen Qiang (3):
  bus: mhi: host: add mhi_power_down_keep_dev()
  net: qrtr: support suspend/hibernation
  wifi: ath11k: support hibernation

 drivers/bus/mhi/host/internal.h        |   4 +-
 drivers/bus/mhi/host/pm.c              |  42 ++++++++--
 drivers/net/wireless/ath/ath11k/ahb.c  |   6 +-
 drivers/net/wireless/ath/ath11k/core.c | 105 +++++++++++++++++--------
 drivers/net/wireless/ath/ath11k/core.h |   6 +-
 drivers/net/wireless/ath/ath11k/hif.h  |  14 +++-
 drivers/net/wireless/ath/ath11k/mhi.c  |  12 ++-
 drivers/net/wireless/ath/ath11k/mhi.h  |   5 +-
 drivers/net/wireless/ath/ath11k/pci.c  |  44 +++++++++--
 drivers/net/wireless/ath/ath11k/qmi.c  |   2 +-
 include/linux/mhi.h                    |  18 ++++-
 net/qrtr/mhi.c                         |  46 +++++++++++
 12 files changed, 244 insertions(+), 60 deletions(-)


base-commit: c39a5cfa0448f3afbee78373f16d87815a674f11
-- 
2.25.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ