lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240304192244.2924407-1-robimarko@gmail.com>
Date: Mon,  4 Mar 2024 20:21:36 +0100
From: Robert Marko <robimarko@...il.com>
To: andersson@...nel.org,
	konrad.dybcio@...aro.org,
	andrew@...n.ch,
	hkallweit1@...il.com,
	linux@...linux.org.uk,
	davem@...emloft.net,
	edumazet@...gle.com,
	kuba@...nel.org,
	pabeni@...hat.com,
	ansuelsmth@...il.com,
	linux-arm-msm@...r.kernel.org,
	netdev@...r.kernel.org,
	linux-kernel@...r.kernel.org
Cc: Robert Marko <robimarko@...il.com>,
	kernel test robot <lkp@...el.com>
Subject: [PATCH net] net: phy: qca807x: fix compilation when CONFIG_GPIOLIB is not set

Kernel bot has discovered that if CONFIG_GPIOLIB is not set compilation
will fail.

Upon investigation the issue is that qca807x_gpio() is guarded by a
preprocessor check but then it is called under
if (IS_ENABLED(CONFIG_GPIOLIB)) in the probe call so the compiler will
error out since qca807x_gpio() has not been declared if CONFIG_GPIOLIB has
not been set.

Fixes: d1cb613efbd3 ("net: phy: qcom: add support for QCA807x PHY Family")
Reported-by: kernel test robot <lkp@...el.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202403031332.IGAbZzwq-lkp@intel.com/
Signed-off-by: Robert Marko <robimarko@...il.com>
---
 drivers/net/phy/qcom/qca807x.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/phy/qcom/qca807x.c b/drivers/net/phy/qcom/qca807x.c
index 780c28e2e4aa..62c01076b506 100644
--- a/drivers/net/phy/qcom/qca807x.c
+++ b/drivers/net/phy/qcom/qca807x.c
@@ -732,7 +732,7 @@ static int qca807x_probe(struct phy_device *phydev)
 	priv->dac_disable_bias_current_tweak = of_property_read_bool(node,
 								     "qcom,dac-disable-bias-current-tweak");
 
-	if (IS_ENABLED(CONFIG_GPIOLIB)) {
+#if IS_ENABLED(CONFIG_GPIOLIB)
 		/* Make sure we don't have mixed leds node and gpio-controller
 		 * to prevent registering leds and having gpio-controller usage
 		 * conflicting with them.
@@ -749,7 +749,7 @@ static int qca807x_probe(struct phy_device *phydev)
 			if (ret)
 				return ret;
 		}
-	}
+#endif
 
 	/* Attach SFP bus on combo port*/
 	if (phy_read(phydev, QCA807X_CHIP_CONFIGURATION)) {
-- 
2.44.0


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ