| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240312142743.41406-1-guwen@linux.alibaba.com>
Date: Tue, 12 Mar 2024 22:27:32 +0800
From: Wen Gu <guwen@...ux.alibaba.com>
To: wintera@...ux.ibm.com,
twinkler@...ux.ibm.com,
hca@...ux.ibm.com,
gor@...ux.ibm.com,
agordeev@...ux.ibm.com,
davem@...emloft.net,
edumazet@...gle.com,
kuba@...nel.org,
pabeni@...hat.com,
wenjia@...ux.ibm.com,
jaka@...ux.ibm.com
Cc: borntraeger@...ux.ibm.com,
svens@...ux.ibm.com,
alibuda@...ux.alibaba.com,
tonylu@...ux.alibaba.com,
guwen@...ux.alibaba.com,
linux-kernel@...r.kernel.org,
linux-s390@...r.kernel.org,
netdev@...r.kernel.org
Subject: [PATCH net-next v3 00/11] net/smc: SMC intra-OS shortcut with loopback-ism
This patch set acts as the second part of the new version of [1] (The first
part can be referred from [2]), the updated things of this version are listed
at the end.
- Background
SMC-D is now used in IBM z with ISM function to optimize network interconnect
for intra-CPC communications. Inspired by this, we try to make SMC-D available
on the non-s390 architecture through a software-implemented Emulated-ISM device,
that is the loopback-ism device here, to accelerate inter-process or
inter-containers communication within the same OS instance.
- Design
This patch set includes 3 parts:
- Patch #1-#2: some prepare work for loopback-ism.
- Patch #3-#7: implement loopback-ism device. Noted that loopback-ism now
serves only SMC and no userspace interface exposed.
- Patch #10-#15: memory copy optimization for intra-OS scenario.
The loopback-ism device is designed as an ISMv2 device and not be limited to
a specific net namespace, ends of both inter-process connection (1/1' in diagram
below) or inter-container connection (2/2' in diagram below) can find the same
available loopback-ism and choose it during the CLC handshake.
Container 1 (ns1) Container 2 (ns2)
+-----------------------------------------+ +-------------------------+
| +-------+ +-------+ +-------+ | | +-------+ |
| | App A | | App B | | App C | | | | App D |<-+ |
| +-------+ +---^---+ +-------+ | | +-------+ |(2') |
| |127.0.0.1 (1')| |192.168.0.11 192.168.0.12| |
| (1)| +--------+ | +--------+ |(2) | | +--------+ +--------+ |
| `-->| lo |-` | eth0 |<-` | | | lo | | eth0 | |
+---------+--|---^-+---+-----|--+---------+ +-+--------+---+-^------+-+
| | | |
Kernel | | | |
+----+-------v---+-----------v----------------------------------+---+----+
| | TCP | |
| | | |
| +--------------------------------------------------------------+ |
| |
| +--------------+ |
| | smc loopback | |
+---------------------------+--------------+-----------------------------+
loopback-ism device creates DMBs (shared memory) for each connection peer.
Since data transfer occurs within the same kernel, the sndbuf of each peer
is only a descriptor and point to the same memory region as peer DMB, so that
the data copy from sndbuf to peer DMB can be avoided in loopback-ism case.
Container 1 (ns1) Container 2 (ns2)
+-----------------------------------------+ +-------------------------+
| +-------+ | | +-------+ |
| | App C |-----+ | | | App D | |
| +-------+ | | | +-^-----+ |
| | | | | |
| (2) | | | (2') | |
| | | | | |
+---------------|-------------------------+ +----------|--------------+
| |
Kernel | |
+---------------|-----------------------------------------|--------------+
| +--------+ +--v-----+ +--------+ +--------+ |
| |dmb_desc| |snd_desc| |dmb_desc| |snd_desc| |
| +-----|--+ +--|-----+ +-----|--+ +--------+ |
| +-----|--+ | +-----|--+ |
| | DMB C | +---------------------------------| DMB D | |
| +--------+ +--------+ |
| |
| +--------------+ |
| | smc loopback | |
+---------------------------+--------------+-----------------------------+
- Benchmark Test
* Test environments:
- VM with Intel Xeon Platinum 8 core 2.50GHz, 16 GiB mem.
- SMC sndbuf/DMB size 1MB.
* Test object:
- TCP: run on TCP loopback.
- SMC lo: run on SMC loopback-ism.
1. ipc-benchmark (see [3])
- ./<foo> -c 1000000 -s 100
TCP SMC-lo
Message
rate (msg/s) 81433 143938(+76.75%)
2. sockperf
- serv: <smc_run> taskset -c <cpu> sockperf sr --tcp
- clnt: <smc_run> taskset -c <cpu> sockperf { tp | pp } --tcp --msg-size={ 64000 for tp | 14 for pp } -i 127.0.0.1 -t 30
TCP SMC-lo
Bandwidth(MBps) 4903.07 7978.69(+62.73%)
Latency(us) 6.095 3.539(-41.94%)
3. nginx/wrk
- serv: <smc_run> nginx
- clnt: <smc_run> wrk -t 8 -c 1000 -d 30 http://127.0.0.1:80
TCP SMC-lo
Requests/s 161665.67 244272.41(+51.10%)
4. redis-benchmark
- serv: <smc_run> redis-server
- clnt: <smc_run> redis-benchmark -h 127.0.0.1 -q -t set,get -n 400000 -c 200 -d 1024
TCP SMC-lo
GET(Requests/s) 88790.23 117474.30(+32.31%)
SET(Requests/s) 87508.20 118623.96(+35.57%)
Change log:
v3->v2:
- Patch #11: use tasklet_schedule(&conn->rx_tsklet) instead of smcd_cdc_rx_handler()
to avoid possible recursive locking of conn->send_lock and use {read|write}_lock_bh()
to acquire dmb_ht_lock.
v2->v1:
Link: https://lore.kernel.org/netdev/20240307095536.29648-1-guwen@linux.alibaba.com/
- All the patches: changed the term virtual-ISM to Emulated-ISM as defined by SMCv2.1.
- Patch #3: optimized the description of SMC_LO config. Avoid exposing loopback-ism
to sysfs and remove all the knobs until future definition clear.
- Patch #3: try to make lockdep happy by using read_lock_bh() in smc_lo_move_data().
- Patch #6: defaultly use physical contiguous DMB buffers.
- Patch #11: defaultly enable DMB no-copy for loopback-ism and free the DMB in
unregister_dmb or detach_dmb when dmb_node->refcnt reaches 0, instead of using
wait_event to keep waiting in unregister_dmb.
v1->RFC:
Link: https://lore.kernel.org/netdev/20240111120036.109903-1-guwen@linux.alibaba.com/
- Patch #9: merge rx_bytes and tx_bytes as xfer_bytes statistics:
/sys/devices/virtual/smc/loopback-ism/xfer_bytes
- Patch #10: add support_dmb_nocopy operation to check if SMC-D device supports
merging sndbuf with peer DMB.
- Patch #13 & #14: introduce loopback-ism device control of DMB memory type and
control of whether to merge sndbuf and DMB. They can be respectively set by:
/sys/devices/virtual/smc/loopback-ism/dmb_type
/sys/devices/virtual/smc/loopback-ism/dmb_copy
The motivation for these two control is that a performance bottleneck was
found when using vzalloced DMB and sndbuf is merged with DMB, and there are
many CPUs and CONFIG_HARDENED_USERCOPY is set [4]. The bottleneck is caused
by the lock contention in vmap_area_lock [5] which is involved in memcpy_from_msg()
or memcpy_to_msg(). Currently, Uladzislau Rezki is working on mitigating the
vmap lock contention [6]. It has significant effects, but using virtual memory
still has additional overhead compared to using physical memory.
So this new version provides controls of dmb_type and dmb_copy to suit
different scenarios.
- Some minor changes and comments improvements.
RFC->old version([1]):
Link: https://lore.kernel.org/netdev/1702214654-32069-1-git-send-email-guwen@linux.alibaba.com/
- Patch #1: improve the loopback-ism dump, it shows as follows now:
# smcd d
FID Type PCI-ID PCHID InUse #LGs PNET-ID
0000 0 loopback-ism ffff No 0
- Patch #3: introduce the smc_ism_set_v2_capable() helper and set
smc_ism_v2_capable when ISMv2 or virtual ISM is registered,
regardless of whether there is already a device in smcd device list.
- Patch #3: loopback-ism will be added into /sys/devices/virtual/smc/loopback-ism/.
- Patch #8: introduce the runtime switch /sys/devices/virtual/smc/loopback-ism/active
to activate or deactivate the loopback-ism.
- Patch #9: introduce the statistics of loopback-ism by
/sys/devices/virtual/smc/loopback-ism/{{tx|rx}_tytes|dmbs_cnt}.
- Some minor changes and comments improvements.
[1] https://lore.kernel.org/netdev/1695568613-125057-1-git-send-email-guwen@linux.alibaba.com/
[2] https://lore.kernel.org/netdev/20231219142616.80697-1-guwen@linux.alibaba.com/
[3] https://github.com/goldsborough/ipc-bench
[4] https://lore.kernel.org/all/3189e342-c38f-6076-b730-19a6efd732a5@linux.alibaba.com/
[5] https://lore.kernel.org/all/238e63cd-e0e8-4fbf-852f-bc4d5bc35d5a@linux.alibaba.com/
[6] https://lore.kernel.org/all/20240102184633.748113-1-urezki@gmail.com/
Wen Gu (11):
net/smc: adapt SMC-D device dump for Emulated-ISM
net/smc: decouple ism_client from SMC-D DMB registration
net/smc: introduce loopback-ism for SMC intra-OS shortcut
net/smc: implement ID-related operations of loopback-ism
net/smc: implement some unsupported operations of loopback-ism
net/smc: implement DMB-related operations of loopback-ism
net/smc: register loopback-ism into SMC-D device list
net/smc: add operations to merge sndbuf with peer DMB
net/smc: attach or detach ghost sndbuf to peer DMB
net/smc: adapt cursor update when sndbuf and peer DMB are merged
net/smc: implement DMB-merged operations of loopback-ism
drivers/s390/net/ism_drv.c | 2 +-
include/net/smc.h | 7 +-
net/smc/Kconfig | 13 ++
net/smc/Makefile | 2 +-
net/smc/af_smc.c | 28 ++-
net/smc/smc_cdc.c | 52 ++++-
net/smc/smc_core.c | 61 ++++-
net/smc/smc_core.h | 1 +
net/smc/smc_ism.c | 71 +++++-
net/smc/smc_ism.h | 5 +
net/smc/smc_loopback.c | 462 +++++++++++++++++++++++++++++++++++++
net/smc/smc_loopback.h | 52 +++++
12 files changed, 727 insertions(+), 29 deletions(-)
create mode 100644 net/smc/smc_loopback.c
create mode 100644 net/smc/smc_loopback.h
--
2.32.0.3.g01195cf9f
Powered by blists - more mailing lists