[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240312192117.7789-1-justin.swartz@risingedge.co.za>
Date: Tue, 12 Mar 2024 21:21:16 +0200
From: Justin Swartz <justin.swartz@...ingedge.co.za>
To: Arınç ÜNAL <arinc.unal@...nc9.com>,
Daniel Golle <daniel@...rotopia.org>,
DENG Qingfang <dqfext@...il.com>,
Sean Wang <sean.wang@...iatek.com>,
Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Matthias Brugger <matthias.bgg@...il.com>,
AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
Cc: Justin Swartz <justin.swartz@...ingedge.co.za>,
netdev@...r.kernel.org,
linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org
Subject: [PATCH] net: dsa: mt7530: increase reset hold time
Increase the MT7530 reset hold period from 1000-1100 usec
to 5000-5100 usec.
This should reduce the likelihood of an incorrect external
crystal frequency selection which may occur when reset is
deasserted too early under certain link conditions.
Signed-off-by: Justin Swartz <justin.swartz@...ingedge.co.za>
---
drivers/net/dsa/mt7530.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 3c1f65759..5e9e1381a 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -2243,11 +2243,11 @@ mt7530_setup(struct dsa_switch *ds)
*/
if (priv->mcm) {
reset_control_assert(priv->rstc);
- usleep_range(1000, 1100);
+ usleep_range(5000, 5100);
reset_control_deassert(priv->rstc);
} else {
gpiod_set_value_cansleep(priv->reset, 0);
- usleep_range(1000, 1100);
+ usleep_range(5000, 5100);
gpiod_set_value_cansleep(priv->reset, 1);
}
--
Powered by blists - more mailing lists