| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CANn89iK2e4csrApZjY+kpR9TwaFpN9rcbRSPtyQnw5P_qkyYfA@mail.gmail.com>
Date: Mon, 18 Mar 2024 20:11:18 +0100
From: Eric Dumazet <edumazet@...gle.com>
To: Jamal Hadi Salim <jhs@...atatu.com>
Cc: renmingshuai <renmingshuai@...wei.com>, xiyou.wangcong@...il.com, jiri@...nulli.us,
davem@...emloft.net, vladbu@...dia.com, netdev@...r.kernel.org,
yanan@...wei.com, liaichun@...wei.com, caowangbao@...wei.com,
Eric Dumazet <eric.dumazet@...il.com>, Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>, Victor Nogueira <victor@...atatu.com>,
Pedro Tammela <pctammela@...atatu.com>
Subject: Re: [PATCH] net/sched: Forbid assigning mirred action to a filter
attached to the egress
On Mon, Mar 18, 2024 at 6:36 PM Jamal Hadi Salim <jhs@...atatu.com> wrote:
>
> On Mon, Mar 18, 2024 at 11:46 AM Eric Dumazet <edumazet@...gle.com> wrote:
> >
> > On Mon, Mar 18, 2024 at 3:27 PM Jamal Hadi Salim <jhs@...atatu.com> wrote:
> > >
> > > On Sun, Mar 17, 2024 at 12:10 PM Jamal Hadi Salim <jhs@...atatu.com> wrote:
> > > >
> > > > On Thu, Mar 14, 2024 at 1:14 PM Jamal Hadi Salim <jhs@...atatu.com> wrote:
> > > > >
> > > > > On Thu, Mar 14, 2024 at 7:18 AM renmingshuai <renmingshuai@...wei.com> wrote:
> > > > > >
> > > > > > As we all know the mirred action is used to mirroring or redirecting the
> > > > > > packet it receives. Howerver, add mirred action to a filter attached to
> > > > > > a egress qdisc might cause a deadlock. To reproduce the problem, perform
> > > > > > the following steps:
> > > > > > (1)tc qdisc add dev eth0 root handle 1: htb default 30 \n
> > > > > > (2)tc filter add dev eth2 protocol ip prio 2 flower verbose \
> > > > > > action police rate 100mbit burst 12m conform-exceed jump 1 \
> > > > > > / pipe mirred egress redirect dev eth2 action drop
> > > > > >
> > > > >
> > > > > I think you meant both to be the same device eth0 or eth2?
> > > > >
> > > > > > The stack is show as below:
> > > > > > [28848.883915] _raw_spin_lock+0x1e/0x30
> > > > > > [28848.884367] __dev_queue_xmit+0x160/0x850
> > > > > > [28848.884851] ? 0xffffffffc031906a
> > > > > > [28848.885279] tcf_mirred_act+0x3ab/0x596 [act_mirred]
> > > > > > [28848.885863] tcf_action_exec.part.0+0x88/0x130
> > > > > > [28848.886401] fl_classify+0x1ca/0x1e0 [cls_flower]
> > > > > > [28848.886970] ? dequeue_entity+0x145/0x9e0
> > > > > > [28848.887464] ? newidle_balance+0x23f/0x2f0
> > > > > > [28848.887973] ? nft_lookup_eval+0x57/0x170 [nf_tables]
> > > > > > [28848.888566] ? nft_do_chain+0xef/0x430 [nf_tables]
> > > > > > [28848.889137] ? __flush_work.isra.0+0x35/0x80
> > > > > > [28848.889657] ? nf_ct_get_tuple+0x1cf/0x210 [nf_conntrack]
> > > > > > [28848.890293] ? do_select+0x637/0x870
> > > > > > [28848.890735] tcf_classify+0x52/0xf0
> > > > > > [28848.891177] htb_classify+0x9d/0x1c0 [sch_htb]
> > > > > > [28848.891722] htb_enqueue+0x3a/0x1c0 [sch_htb]
> > > > > > [28848.892251] __dev_queue_xmit+0x2d8/0x850
> > > > > > [28848.892738] ? nf_hook_slow+0x3c/0xb0
> > > > > > [28848.893198] ip_finish_output2+0x272/0x580
> > > > > > [28848.893692] __ip_queue_xmit+0x193/0x420
> > > > > > [28848.894179] __tcp_transmit_skb+0x8cc/0x970
> > > > > >
> > > > > > In this case, the process has hold the qdisc spin lock in __dev_queue_xmit
> > > > > > before the egress packets are mirred, and it will attempt to obtain the
> > > > > > spin lock again after packets are mirred, which cause a deadlock.
> > > > > >
> > > > > > Fix the issue by forbidding assigning mirred action to a filter attached
> > > > > > to the egress.
> > > > > >
> > > > > > Signed-off-by: Mingshuai Ren <renmingshuai@...wei.com>
> > > > > > ---
> > > > > > net/sched/act_mirred.c | 4 +++
> > > > > > .../tc-testing/tc-tests/actions/mirred.json | 32 +++++++++++++++++++
> > > > > > 2 files changed, 36 insertions(+)
> > > > > >
> > > > > > diff --git a/net/sched/act_mirred.c b/net/sched/act_mirred.c
> > > > > > index 5b3814365924..fc96705285fb 100644
> > > > > > --- a/net/sched/act_mirred.c
> > > > > > +++ b/net/sched/act_mirred.c
> > > > > > @@ -120,6 +120,10 @@ static int tcf_mirred_init(struct net *net, struct nlattr *nla,
> > > > > > NL_SET_ERR_MSG_MOD(extack, "Mirred requires attributes to be passed");
> > > > > > return -EINVAL;
> > > > > > }
> > > > > > + if (tp->chain->block->q->parent != TC_H_INGRESS) {
> > > > > > + NL_SET_ERR_MSG_MOD(extack, "Mirred can only be assigned to the filter attached to ingress");
> > > > > > + return -EINVAL;
> > > > > > + }
> > > > >
> > > > > Sorry, this is too restrictive as Jiri said. We'll try to reproduce. I
> > > > > am almost certain this used to work in the old days.
> > > >
> > > > Ok, i looked at old notes - it did work at "some point" pre-tdc.
> > > > Conclusion is things broke around this time frame:
> > > > https://lore.kernel.org/netdev/1431679850-31896-1-git-send-email-fw@strlen.de/
> > > > https://lore.kernel.org/netdev/1465095748.2968.45.camel@edumazet-glaptop3.roam.corp.google.com/
> > > >
> > > > Looking further into it.
> > >
> > > This is what we came up with. Eric, please take a look...
> > >
> > > cheers,
> > > jamal
> > >
> > >
> > > --- a/net/core/dev.c
> > > +++ b/net/core/dev.c
> > > @@ -3789,7 +3789,14 @@ static inline int __dev_xmit_skb(struct sk_buff
> > > *skb, struct Qdisc *q,
> > > if (unlikely(contended))
> > > spin_lock(&q->busylock);
> > >
> > > + if (dev_recursion_level()) {
> >
> > I am not sure what your intent is, but this seems wrong to me.
> >
>
> There is a deadlock if you reenter the same device which has a qdisc
> attached to it more than once.
> Essentially entering __dev_xmit_skb() we grab the root qdisc lock then
> run some action which requires it to grab the root qdisc lock (again).
> This is easy to show with mirred (although i am wondering if syzkaller
> may have produced this at some point)..
> $TC qdisc add dev $DEV root handle 1: htb default 1
> $TC filter add dev $DEV protocol ip u32 match ip protocol 1 0xff
> action mirred egress mirror dev $DEV
>
> Above example is essentially egress $DEV-> egress $DEV in both cases
> "egress $DEV" grabs the root qdisc lock. You could also create another
> example with egress($DEV1->$DEV2->back to $DEV1).
>
> > Some valid setup use :
> >
> > A bonding device, with HTB qdisc (or other qdisc)
> > (This also could be a tunnel device with a qdisc)
> >
> > -> one or multiple physical NIC, wth FQ or other qdisc.
> >
> > Packets would be dropped here when we try to reach the physical device.
> >
>
> If you have an example handy please send it. I am trying to imagine
> how those would have worked if they have to reenter the root qdisc of
> the same dev multiple times..
Any virtual device like a GRE/SIT/IPIP/... tunnel, add a qdisc on it ?
dev_xmit_recursion_inc() is global (per-cpu), it is not per-device.
A stack of devices A -> B -> C would elevate the recursion level to
three just fine.
After your patch, a stack of devices would no longer work.
It seems mirred correctly injects packets to the top of the stack for
ingress (via netif_rx() / netif_receive_skb()),
but thinks it is okay to call dev_queue_xmit(), regardless of the context ?
Perhaps safe-guard mirred, instead of adding more code to fast path.
Powered by blists - more mailing lists