netdev - [PATCH net-next v2] net: phy: dp8382x: keep WOL settings across suspends

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20240328133358.30544-1-catalin.popescu@leica-geosystems.com>
Date: Thu, 28 Mar 2024 14:33:58 +0100
From: Catalin Popescu <catalin.popescu@...ca-geosystems.com>
To: andrew@...n.ch,
	hkallweit1@...il.com,
	linux@...linux.org.uk,
	davem@...emloft.net,
	edumazet@...gle.com,
	kuba@...nel.org,
	pabeni@...hat.com
Cc: netdev@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	m.felsch@...gutronix.de,
	bsp-development.geo@...ca-geosystems.com,
	Catalin Popescu <catalin.popescu@...ca-geosystems.com>
Subject: [PATCH net-next v2] net: phy: dp8382x: keep WOL settings across suspends

Unlike other ethernet PHYs from TI, PHY dp8382x has WOL enabled
at reset. The driver explicitly disables WOL in config_init callback
which is called during init and during resume from suspend. Hence,
WOL is unconditionally disabled during resume, even if it was enabled
before the suspend. We make sure that WOL configuration is persistent
across suspends.

Signed-off-by: Catalin Popescu <catalin.popescu@...ca-geosystems.com>
---
Changes in v2:
 - store the whole WoL settings not only the wol_enabled flag
 - in config_init, reconfigure WoL from stored settings, overriding
   any setting from BIOS/bootloader
 - fix device name in commit message (dp8382x vs dp83822x)
---
 drivers/net/phy/dp83822.c | 37 ++++++++++++++++++++++++-------------
 1 file changed, 24 insertions(+), 13 deletions(-)

diff --git a/drivers/net/phy/dp83822.c b/drivers/net/phy/dp83822.c
index c3426a17e6d0..683ebb13bd4f 100644
--- a/drivers/net/phy/dp83822.c
+++ b/drivers/net/phy/dp83822.c
@@ -140,10 +140,11 @@ struct dp83822_private {
 	u16 fx_sd_enable;
 	u8 cfg_dac_minus;
 	u8 cfg_dac_plus;
+	struct ethtool_wolinfo wol;
 };
 
-static int dp83822_set_wol(struct phy_device *phydev,
-			   struct ethtool_wolinfo *wol)
+static int _dp83822_set_wol(struct phy_device *phydev,
+			    struct ethtool_wolinfo *wol)
 {
 	struct net_device *ndev = phydev->attached_dev;
 	u16 value;
@@ -197,10 +198,25 @@ static int dp83822_set_wol(struct phy_device *phydev,
 				     MII_DP83822_WOL_CFG, value);
 	} else {
 		return phy_clear_bits_mmd(phydev, DP83822_DEVADDR,
-					  MII_DP83822_WOL_CFG, DP83822_WOL_EN);
+					  MII_DP83822_WOL_CFG,
+					  DP83822_WOL_EN |
+					  DP83822_WOL_MAGIC_EN |
+					  DP83822_WOL_SECURE_ON);
 	}
 }
 
+static int dp83822_set_wol(struct phy_device *phydev,
+			   struct ethtool_wolinfo *wol)
+{
+	struct dp83822_private *dp83822 = phydev->priv;
+	int ret;
+
+	ret = _dp83822_set_wol(phydev, wol);
+	if (!ret)
+		memcpy(&dp83822->wol, wol, sizeof(*wol));
+	return ret;
+}
+
 static void dp83822_get_wol(struct phy_device *phydev,
 			    struct ethtool_wolinfo *wol)
 {
@@ -346,13 +362,6 @@ static irqreturn_t dp83822_handle_interrupt(struct phy_device *phydev)
 	return IRQ_HANDLED;
 }
 
-static int dp8382x_disable_wol(struct phy_device *phydev)
-{
-	return phy_clear_bits_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG,
-				  DP83822_WOL_EN | DP83822_WOL_MAGIC_EN |
-				  DP83822_WOL_SECURE_ON);
-}
-
 static int dp83822_read_status(struct phy_device *phydev)
 {
 	struct dp83822_private *dp83822 = phydev->priv;
@@ -496,7 +505,7 @@ static int dp83822_config_init(struct phy_device *phydev)
 				return err;
 		}
 	}
-	return dp8382x_disable_wol(phydev);
+	return _dp83822_set_wol(phydev, &dp83822->wol);
 }
 
 static int dp83826_config_rmii_mode(struct phy_device *phydev)
@@ -575,12 +584,14 @@ static int dp83826_config_init(struct phy_device *phydev)
 			return ret;
 	}
 
-	return dp8382x_disable_wol(phydev);
+	return _dp83822_set_wol(phydev, &dp83822->wol);
 }
 
 static int dp8382x_config_init(struct phy_device *phydev)
 {
-	return dp8382x_disable_wol(phydev);
+	struct dp83822_private *dp83822 = phydev->priv;
+
+	return _dp83822_set_wol(phydev, &dp83822->wol);
 }
 
 static int dp83822_phy_reset(struct phy_device *phydev)

base-commit: a6bd6c9333397f5a0e2667d4d82fef8c970108f2
prerequisite-patch-id: 0000000000000000000000000000000000000000
-- 
2.34.1