lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240408-stmmac-eee-v1-1-3d65d671c06b@lunn.ch>
Date: Mon, 08 Apr 2024 19:54:04 -0500
From: Andrew Lunn <andrew@...n.ch>
To: Doug Berger <opendmb@...il.com>, 
 Florian Fainelli <florian.fainelli@...adcom.com>, 
 Broadcom internal kernel review list <bcm-kernel-feedback-list@...adcom.com>, 
 "David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>, 
 Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>, 
 Oleksij Rempel <o.rempel@...gutronix.de>
Cc: netdev@...r.kernel.org, Andrew Lunn <andrew@...n.ch>
Subject: [PATCH net-next] net: genet: Fixup EEE

The enabling/disabling of EEE in the MAC should happen as a result of
auto negotiation. So move the enable/disable into bcmgenet_mii_setup()
which gets called by phylib when there is a change in link status.

bcmgenet_set_eee() now just writes the LPI timer value to the
hardware.  Everything else is passed to phylib, so it can correctly
setup the PHY.

bcmgenet_get_eee() relies on phylib doing most of the work, the MAC
driver just adds the LPI timer value from hardware.

Signed-off-by: Andrew Lunn <andrew@...n.ch>
---
 drivers/net/ethernet/broadcom/genet/bcmgenet.c | 26 ++++++--------------------
 drivers/net/ethernet/broadcom/genet/bcmgenet.h |  6 +-----
 drivers/net/ethernet/broadcom/genet/bcmmii.c   |  7 +------
 3 files changed, 8 insertions(+), 31 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index b1f84b37032a..c090b519255a 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -1272,13 +1272,14 @@ static void bcmgenet_get_ethtool_stats(struct net_device *dev,
 	}
 }
 
-void bcmgenet_eee_enable_set(struct net_device *dev, bool enable,
-			     bool tx_lpi_enabled)
+void bcmgenet_eee_enable_set(struct net_device *dev, bool enable)
 {
 	struct bcmgenet_priv *priv = netdev_priv(dev);
-	u32 off = priv->hw_params->tbuf_offset + TBUF_ENERGY_CTRL;
+	u32 off;
 	u32 reg;
 
+	off = priv->hw_params->tbuf_offset + TBUF_ENERGY_CTRL;
+
 	if (enable && !priv->clk_eee_enabled) {
 		clk_prepare_enable(priv->clk_eee);
 		priv->clk_eee_enabled = true;
@@ -1293,7 +1294,7 @@ void bcmgenet_eee_enable_set(struct net_device *dev, bool enable,
 
 	/* Enable EEE and switch to a 27Mhz clock automatically */
 	reg = bcmgenet_readl(priv->base + off);
-	if (tx_lpi_enabled)
+	if (enable)
 		reg |= TBUF_EEE_EN | TBUF_PM_EN;
 	else
 		reg &= ~(TBUF_EEE_EN | TBUF_PM_EN);
@@ -1311,15 +1312,11 @@ void bcmgenet_eee_enable_set(struct net_device *dev, bool enable,
 		clk_disable_unprepare(priv->clk_eee);
 		priv->clk_eee_enabled = false;
 	}
-
-	priv->eee.eee_enabled = enable;
-	priv->eee.tx_lpi_enabled = tx_lpi_enabled;
 }
 
 static int bcmgenet_get_eee(struct net_device *dev, struct ethtool_keee *e)
 {
 	struct bcmgenet_priv *priv = netdev_priv(dev);
-	struct ethtool_keee *p = &priv->eee;
 
 	if (GENET_IS_V1(priv))
 		return -EOPNOTSUPP;
@@ -1327,7 +1324,6 @@ static int bcmgenet_get_eee(struct net_device *dev, struct ethtool_keee *e)
 	if (!dev->phydev)
 		return -ENODEV;
 
-	e->tx_lpi_enabled = p->tx_lpi_enabled;
 	e->tx_lpi_timer = bcmgenet_umac_readl(priv, UMAC_EEE_LPI_TIMER);
 
 	return phy_ethtool_get_eee(dev->phydev, e);
@@ -1336,8 +1332,6 @@ static int bcmgenet_get_eee(struct net_device *dev, struct ethtool_keee *e)
 static int bcmgenet_set_eee(struct net_device *dev, struct ethtool_keee *e)
 {
 	struct bcmgenet_priv *priv = netdev_priv(dev);
-	struct ethtool_keee *p = &priv->eee;
-	bool active;
 
 	if (GENET_IS_V1(priv))
 		return -EOPNOTSUPP;
@@ -1345,15 +1339,7 @@ static int bcmgenet_set_eee(struct net_device *dev, struct ethtool_keee *e)
 	if (!dev->phydev)
 		return -ENODEV;
 
-	p->eee_enabled = e->eee_enabled;
-
-	if (!p->eee_enabled) {
-		bcmgenet_eee_enable_set(dev, false, false);
-	} else {
-		active = phy_init_eee(dev->phydev, false) >= 0;
-		bcmgenet_umac_writel(priv, e->tx_lpi_timer, UMAC_EEE_LPI_TIMER);
-		bcmgenet_eee_enable_set(dev, active, e->tx_lpi_enabled);
-	}
+	bcmgenet_umac_writel(priv, e->tx_lpi_timer, UMAC_EEE_LPI_TIMER);
 
 	return phy_ethtool_set_eee(dev->phydev, e);
 }
diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.h b/drivers/net/ethernet/broadcom/genet/bcmgenet.h
index 7523b60b3c1c..bb82ecb2e220 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.h
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.h
@@ -644,8 +644,6 @@ struct bcmgenet_priv {
 	bool wol_active;
 
 	struct bcmgenet_mib_counters mib;
-
-	struct ethtool_keee eee;
 };
 
 #define GENET_IO_MACRO(name, offset)					\
@@ -703,7 +701,5 @@ int bcmgenet_wol_power_down_cfg(struct bcmgenet_priv *priv,
 void bcmgenet_wol_power_up_cfg(struct bcmgenet_priv *priv,
 			       enum bcmgenet_power_mode mode);
 
-void bcmgenet_eee_enable_set(struct net_device *dev, bool enable,
-			     bool tx_lpi_enabled);
-
+void bcmgenet_eee_enable_set(struct net_device *dev, bool enable);
 #endif /* __BCMGENET_H__ */
diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c
index 9ada89355747..25eeea4c1965 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmmii.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c
@@ -30,7 +30,6 @@ static void bcmgenet_mac_config(struct net_device *dev)
 	struct bcmgenet_priv *priv = netdev_priv(dev);
 	struct phy_device *phydev = dev->phydev;
 	u32 reg, cmd_bits = 0;
-	bool active;
 
 	/* speed */
 	if (phydev->speed == SPEED_1000)
@@ -88,11 +87,6 @@ static void bcmgenet_mac_config(struct net_device *dev)
 		reg |= CMD_TX_EN | CMD_RX_EN;
 	}
 	bcmgenet_umac_writel(priv, reg, UMAC_CMD);
-
-	active = phy_init_eee(phydev, 0) >= 0;
-	bcmgenet_eee_enable_set(dev,
-				priv->eee.eee_enabled && active,
-				priv->eee.tx_lpi_enabled);
 }
 
 /* setup netdev link state when PHY link status change and
@@ -106,6 +100,7 @@ void bcmgenet_mii_setup(struct net_device *dev)
 
 	if (phydev->link) {
 		bcmgenet_mac_config(dev);
+		bcmgenet_eee_enable_set(dev, phydev->enable_tx_lpi);
 	} else {
 		reg = bcmgenet_ext_readl(priv, EXT_RGMII_OOB_CTRL);
 		reg &= ~RGMII_LINK;

---
base-commit: 39f59c72ad3a1eaab9a60f0671bc94d2bc826d21
change-id: 20240408-stmmac-eee-d3c8e096f6a2

Best regards,
-- 
Andrew Lunn <andrew@...n.ch>


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ