| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <fa22df795219256b093659195c4609445a175a1d.1716973237.git.siyanteng@loongson.cn>
Date: Wed, 29 May 2024 18:20:26 +0800
From: Yanteng Si <siyanteng@...ngson.cn>
To: andrew@...n.ch,
hkallweit1@...il.com,
peppe.cavallaro@...com,
alexandre.torgue@...s.st.com,
joabreu@...opsys.com,
fancer.lancer@...il.com
Cc: Yanteng Si <siyanteng@...ngson.cn>,
Jose.Abreu@...opsys.com,
chenhuacai@...nel.org,
linux@...linux.org.uk,
guyinggang@...ngson.cn,
netdev@...r.kernel.org,
chris.chenfeiyang@...il.com,
si.yanteng@...ux.dev
Subject: [PATCH net-next v13 10/15] net: stmmac: dwmac-loongson: Add DT-less GMAC PCI-device support
The Loongson GMAC driver currently supports the network controllers
installed on the LS2K1000 SoC and LS7A1000 chipset, for which the GMAC
devices are required to be defined in the platform device tree source.
Let's extend the driver functionality with the case of having the
Loongson GMAC probed on the PCI bus with no device tree node defined
for it. That requires to make the device DT-node optional, to rely on
the IRQ line detected by the PCI core and to have the MDIO bus ID
calculated using the PCIe Domain+BDF numbers.
Signed-off-by: Feiyang Chen <chenfeiyang@...ngson.cn>
Signed-off-by: Yinggang Gu <guyinggang@...ngson.cn>
Signed-off-by: Yanteng Si <siyanteng@...ngson.cn>
---
.../ethernet/stmicro/stmmac/dwmac-loongson.c | 105 +++++++++---------
1 file changed, 53 insertions(+), 52 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
index fec2aa0607d4..8bcf9d522781 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
@@ -12,11 +12,15 @@
#define PCI_DEVICE_ID_LOONGSON_GMAC 0x7a03
struct stmmac_pci_info {
- int (*setup)(struct plat_stmmacenet_data *plat);
+ int (*setup)(struct pci_dev *pdev, struct plat_stmmacenet_data *plat);
};
-static void loongson_default_data(struct plat_stmmacenet_data *plat)
+static void loongson_default_data(struct pci_dev *pdev,
+ struct plat_stmmacenet_data *plat)
{
+ /* Get bus_id, this can be overwritten later */
+ plat->bus_id = pci_dev_id(pdev);
+
plat->clk_csr = 2; /* clk_csr_i = 20-35MHz & MDC = clk_csr_i/16 */
plat->has_gmac = 1;
plat->force_sf_dma_mode = 1;
@@ -49,9 +53,10 @@ static void loongson_default_data(struct plat_stmmacenet_data *plat)
plat->dma_cfg->pblx8 = true;
}
-static int loongson_gmac_data(struct plat_stmmacenet_data *plat)
+static int loongson_gmac_data(struct pci_dev *pdev,
+ struct plat_stmmacenet_data *plat)
{
- loongson_default_data(plat);
+ loongson_default_data(pdev, plat);
plat->phy_interface = PHY_INTERFACE_MODE_RGMII_ID;
@@ -68,15 +73,10 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
struct stmmac_pci_info *info;
struct stmmac_resources res;
struct device_node *np;
- int ret, i, phy_mode;
+ int ret, i;
np = dev_of_node(&pdev->dev);
- if (!np) {
- pr_info("dwmac_loongson_pci: No OF node\n");
- return -ENODEV;
- }
-
plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL);
if (!plat)
return -ENOMEM;
@@ -87,17 +87,9 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
if (!plat->mdio_bus_data)
return -ENOMEM;
- plat->mdio_node = of_get_child_by_name(np, "mdio");
- if (plat->mdio_node) {
- dev_info(&pdev->dev, "Found MDIO subnode\n");
- plat->mdio_bus_data->needs_reset = true;
- }
-
plat->dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*plat->dma_cfg), GFP_KERNEL);
- if (!plat->dma_cfg) {
- ret = -ENOMEM;
- goto err_put_node;
- }
+ if (!plat->dma_cfg)
+ return -ENOMEM;
/* Enable pci device */
ret = pci_enable_device(pdev);
@@ -117,49 +109,58 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
}
info = (struct stmmac_pci_info *)id->driver_data;
- ret = info->setup(plat);
+ ret = info->setup(pdev, plat);
if (ret)
goto err_disable_device;
- plat->bus_id = of_alias_get_id(np, "ethernet");
- if (plat->bus_id < 0)
- plat->bus_id = pci_dev_id(pdev);
+ pci_set_master(pdev);
- phy_mode = device_get_phy_mode(&pdev->dev);
- if (phy_mode < 0) {
- dev_err(&pdev->dev, "phy_mode not found\n");
- ret = phy_mode;
- goto err_disable_device;
- }
+ if (np) {
+ plat->mdio_node = of_get_child_by_name(np, "mdio");
+ if (plat->mdio_node) {
+ dev_info(&pdev->dev, "Found MDIO subnode\n");
+ plat->mdio_bus_data->needs_reset = true;
+ }
- plat->phy_interface = phy_mode;
+ ret = of_alias_get_id(np, "ethernet");
+ if (ret >= 0)
+ plat->bus_id = ret;
- pci_set_master(pdev);
+ ret = device_get_phy_mode(&pdev->dev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "phy_mode not found\n");
+ goto err_disable_device;
+ }
+
+ plat->phy_interface = ret;
+
+ res.irq = of_irq_get_byname(np, "macirq");
+ if (res.irq < 0) {
+ dev_err(&pdev->dev, "IRQ macirq not found\n");
+ ret = -ENODEV;
+ goto err_disable_msi;
+ }
+
+ res.wol_irq = of_irq_get_byname(np, "eth_wake_irq");
+ if (res.wol_irq < 0) {
+ dev_info(&pdev->dev, "IRQ eth_wake_irq not found, using macirq\n");
+ res.wol_irq = res.irq;
+ }
+
+ res.lpi_irq = of_irq_get_byname(np, "eth_lpi");
+ if (res.lpi_irq < 0) {
+ dev_err(&pdev->dev, "IRQ eth_lpi not found\n");
+ ret = -ENODEV;
+ goto err_disable_msi;
+ }
+ } else {
+ res.irq = pdev->irq;
+ }
pci_enable_msi(pdev);
memset(&res, 0, sizeof(res));
res.addr = pcim_iomap_table(pdev)[0];
- res.irq = of_irq_get_byname(np, "macirq");
- if (res.irq < 0) {
- dev_err(&pdev->dev, "IRQ macirq not found\n");
- ret = -ENODEV;
- goto err_disable_msi;
- }
-
- res.wol_irq = of_irq_get_byname(np, "eth_wake_irq");
- if (res.wol_irq < 0) {
- dev_info(&pdev->dev, "IRQ eth_wake_irq not found, using macirq\n");
- res.wol_irq = res.irq;
- }
-
- res.lpi_irq = of_irq_get_byname(np, "eth_lpi");
- if (res.lpi_irq < 0) {
- dev_err(&pdev->dev, "IRQ eth_lpi not found\n");
- ret = -ENODEV;
- goto err_disable_msi;
- }
-
plat->tx_queues_to_use = 1;
plat->rx_queues_to_use = 1;
--
2.31.4
Powered by blists - more mailing lists