lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <b7dbb5c3cc6beef74a5d8df193394a8a8a2b46a1.1716973237.git.siyanteng@loongson.cn>
Date: Wed, 29 May 2024 18:20:27 +0800
From: Yanteng Si <siyanteng@...ngson.cn>
To: andrew@...n.ch,
	hkallweit1@...il.com,
	peppe.cavallaro@...com,
	alexandre.torgue@...s.st.com,
	joabreu@...opsys.com,
	fancer.lancer@...il.com
Cc: Yanteng Si <siyanteng@...ngson.cn>,
	Jose.Abreu@...opsys.com,
	chenhuacai@...nel.org,
	linux@...linux.org.uk,
	guyinggang@...ngson.cn,
	netdev@...r.kernel.org,
	chris.chenfeiyang@...il.com,
	si.yanteng@...ux.dev
Subject: [PATCH net-next v13 11/15] net: stmmac: dwmac-loongson: Add loongson_dwmac_dt_config

While at it move the np initialization procedure into a dedicated
method. It will be useful in one of the subsequent commit adding the
Loongson GNET device support.

Signed-off-by: Feiyang Chen <chenfeiyang@...ngson.cn>
Signed-off-by: Yinggang Gu <guyinggang@...ngson.cn>
Signed-off-by: Yanteng Si <siyanteng@...ngson.cn>
---
 .../ethernet/stmicro/stmmac/dwmac-loongson.c  | 90 ++++++++++---------
 1 file changed, 50 insertions(+), 40 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
index 8bcf9d522781..fdd25ff33d02 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
@@ -67,16 +67,60 @@ static struct stmmac_pci_info loongson_gmac_pci_info = {
 	.setup = loongson_gmac_data,
 };
 
+static int loongson_dwmac_dt_config(struct pci_dev *pdev,
+				    struct plat_stmmacenet_data *plat,
+				    struct stmmac_resources *res)
+{
+	struct device_node *np = dev_of_node(&pdev->dev);
+	int ret;
+
+	plat->mdio_node = of_get_child_by_name(np, "mdio");
+	if (plat->mdio_node) {
+		dev_info(&pdev->dev, "Found MDIO subnode\n");
+		plat->mdio_bus_data->needs_reset = true;
+	}
+
+	ret = of_alias_get_id(np, "ethernet");
+	if (ret >= 0)
+		plat->bus_id = ret;
+
+	res->irq = of_irq_get_byname(np, "macirq");
+	if (res->irq < 0) {
+		dev_err(&pdev->dev, "IRQ macirq not found\n");
+		return -ENODEV;
+	}
+
+	res->wol_irq = of_irq_get_byname(np, "eth_wake_irq");
+	if (res->wol_irq < 0) {
+		dev_info(&pdev->dev,
+			 "IRQ eth_wake_irq not found, using macirq\n");
+		res->wol_irq = res->irq;
+	}
+
+	res->lpi_irq = of_irq_get_byname(np, "eth_lpi");
+	if (res->lpi_irq < 0) {
+		dev_err(&pdev->dev, "IRQ eth_lpi not found\n");
+		return -ENODEV;
+	}
+
+	ret = device_get_phy_mode(&pdev->dev);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "phy_mode not found\n");
+		return -ENODEV;
+	}
+
+	plat->phy_interface = ret;
+
+	return 0;
+}
+
 static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	struct plat_stmmacenet_data *plat;
 	struct stmmac_pci_info *info;
 	struct stmmac_resources res;
-	struct device_node *np;
 	int ret, i;
 
-	np = dev_of_node(&pdev->dev);
-
 	plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL);
 	if (!plat)
 		return -ENOMEM;
@@ -115,44 +159,10 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
 
 	pci_set_master(pdev);
 
-	if (np) {
-		plat->mdio_node = of_get_child_by_name(np, "mdio");
-		if (plat->mdio_node) {
-			dev_info(&pdev->dev, "Found MDIO subnode\n");
-			plat->mdio_bus_data->needs_reset = true;
-		}
-
-		ret = of_alias_get_id(np, "ethernet");
-		if (ret >= 0)
-			plat->bus_id = ret;
-
-		ret = device_get_phy_mode(&pdev->dev);
-		if (ret < 0) {
-			dev_err(&pdev->dev, "phy_mode not found\n");
+	if (dev_of_node(&pdev->dev)) {
+		ret = loongson_dwmac_dt_config(pdev, plat, &res);
+		if (ret)
 			goto err_disable_device;
-		}
-
-		plat->phy_interface = ret;
-
-		res.irq = of_irq_get_byname(np, "macirq");
-		if (res.irq < 0) {
-			dev_err(&pdev->dev, "IRQ macirq not found\n");
-			ret = -ENODEV;
-			goto err_disable_msi;
-		}
-
-		res.wol_irq = of_irq_get_byname(np, "eth_wake_irq");
-		if (res.wol_irq < 0) {
-			dev_info(&pdev->dev, "IRQ eth_wake_irq not found, using macirq\n");
-			res.wol_irq = res.irq;
-		}
-
-		res.lpi_irq = of_irq_get_byname(np, "eth_lpi");
-		if (res.lpi_irq < 0) {
-			dev_err(&pdev->dev, "IRQ eth_lpi not found\n");
-			ret = -ENODEV;
-			goto err_disable_msi;
-		}
 	} else {
 		res.irq = pdev->irq;
 	}
-- 
2.31.4


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ