[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <7wmrxqrkruuvk3ceqy37gtu23axhm5aun3afi4pfs5lohtzwku@dmedpa32pf6v>
Date: Wed, 29 May 2024 17:02:02 -0500
From: Andrew Halaney <ahalaney@...hat.com>
To: "Russell King (Oracle)" <linux@...linux.org.uk>
Cc: Andrew Lunn <andrew@...n.ch>, Heiner Kallweit <hkallweit1@...il.com>,
Alexandre Torgue <alexandre.torgue@...s.st.com>, "David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>,
Jose Abreu <joabreu@...opsys.com>, linux-arm-kernel@...ts.infradead.org,
linux-stm32@...md-mailman.stormreply.com, Madalin Bucur <madalin.bucur@....com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>, netdev@...r.kernel.org, Paolo Abeni <pabeni@...hat.com>,
Sean Anderson <sean.anderson@...o.com>, Serge Semin <fancer.lancer@...il.com>
Subject: Re: [PATCH net-next 0/6] net: phylink: rearrange ovr_an_inband
support
On Wed, May 29, 2024 at 02:28:42PM GMT, Russell King (Oracle) wrote:
> Hi,
>
> This series addresses the use of the ovr_an_inband flag, which is used
> by two drivers to indicate to phylink that they wish to use inband mode
> without firmware specifying inband mode.
>
> The issue with ovr_an_inband is that it overrides not only PHY mode,
> but also fixed-link mode. Both of the drivers that set this flag
> contain code to detect when fixed-link mode will be used, and then
> either avoid setting it or explicitly clear the flag. This is
> wasteful when phylink already knows this.
>
> Therefore, the approach taken in this patch set is to replace the
> ovr_an_inband flag with a default_an_inband flag which means that
> phylink defaults to MLO_AN_INBAND instead of MLO_AN_PHY, and will
> allow that default to be overriden if firmware specifies a fixed-link.
> This allows users of ovr_an_inband to be simplified.
>
> What's more is this requires minimal changes in phylink to allow this
> new mode of operation.
>
> This series changes phylink, and also updates the two drivers
> (fman_memac and stmmac), and then removes the unnecessary complexity
> from the drivers.
>
> This series may depend on the stmmac cleanup series I've posted
> earlier - this is something I have not checked, but I currently have
> these patches on top of that series.
>
> drivers/net/ethernet/freescale/fman/fman_memac.c | 16 ++++++----------
> drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c | 15 ++-------------
> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 4 ++--
> drivers/net/phy/phylink.c | 11 ++++++++---
> include/linux/phylink.h | 5 +++--
> include/linux/stmmac.h | 2 +-
> 6 files changed, 22 insertions(+), 31 deletions(-)
>
> --
> RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
> FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!
>
This all seems more clear to me now for what it is worth:
Reviewed-by: Andrew Halaney <ahalaney@...hat.com>
Powered by blists - more mailing lists