[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <475878c7-f386-4dd3-acb8-9f5a5f1b9102@loongson.cn>
Date: Tue, 2 Jul 2024 21:14:07 +0800
From: Yanteng Si <siyanteng@...ngson.cn>
To: Serge Semin <fancer.lancer@...il.com>
Cc: andrew@...n.ch, hkallweit1@...il.com, peppe.cavallaro@...com,
alexandre.torgue@...s.st.com, joabreu@...opsys.com, Jose.Abreu@...opsys.com,
chenhuacai@...nel.org, linux@...linux.org.uk, guyinggang@...ngson.cn,
netdev@...r.kernel.org, chris.chenfeiyang@...il.com, si.yanteng@...ux.dev
Subject: Re: [PATCH net-next v13 06/15] net: stmmac: dwmac-loongson: Detach
GMAC-specific platform data init
在 2024/7/2 16:28, Serge Semin 写道:
> On Wed, May 29, 2024 at 06:19:03PM +0800, Yanteng Si wrote:
>> Loongson delivers two types of the network devices: Loongson GMAC and
>> Loongson GNET in the framework of four CPU/Chipsets revisions:
>>
>> Chip Network PCI Dev ID Synopys Version DMA-channel
>> LS2K1000 CPU GMAC 0x7a03 v3.50a/v3.73a 1
>> LS7A1000 Chipset GMAC 0x7a03 v3.50a/v3.73a 1
>> LS2K2000 CPU GNET 0x7a13 v3.73a 8
>> LS7A2000 Chipset GNET 0x7a13 v3.73a 1
>>
>> The driver currently supports the chips with the Loongson GMAC network
>> device. As a preparation before adding the Loongson GNET support
>> detach the Loongson GMAC-specific platform data initializations to the
>> loongson_gmac_data() method and preserve the common settings in the
>> loongson_default_data().
>>
>> While at it drop the return value statement from the
>> loongson_default_data() method as redundant.
> Based on the last hardware setup insight Loongson GMAC with AV-feature
> can be found on the LS2K2000 CPU. Thus the commit log should be:
>
> "Loongson delivers two types of the network devices: Loongson GMAC and
> Loongson GNET in the framework of four CPU/Chipsets revisions:
>
> Chip Network PCI Dev ID Synopys Version DMA-channel
> LS2K1000 CPU GMAC 0x7a03 v3.50a/v3.73a 1
> LS7A1000 Chipset GMAC 0x7a03 v3.50a/v3.73a 1
> LS2K2000 CPU GMAC 0x7a03 v3.73a 8
> LS2K2000 CPU GNET 0x7a13 v3.73a 8
> LS7A2000 Chipset GNET 0x7a13 v3.73a 1
>
> The driver currently supports the chips with the Loongson GMAC network
> device synthesized with a single DMA-channel available. As a
> preparation before adding the Loongson GNET support detach the
> Loongson GMAC-specific platform data initializations to the
> loongson_gmac_data() method and preserve the common settings in the
> loongson_default_data().
>
> While at it drop the return value statement from the
> loongson_default_data() method as redundant."
OK, Thank you very much!
>
>> Signed-off-by: Feiyang Chen <chenfeiyang@...ngson.cn>
>> Signed-off-by: Yinggang Gu <guyinggang@...ngson.cn>
>> Signed-off-by: Yanteng Si <siyanteng@...ngson.cn>
>> ---
>> .../ethernet/stmicro/stmmac/dwmac-loongson.c | 19 ++++++++++++-------
>> 1 file changed, 12 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
>> index 739b73f4fc35..ad3f44440963 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
>> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
>> @@ -11,7 +11,7 @@
>>
>> #define PCI_DEVICE_ID_LOONGSON_GMAC 0x7a03
>>
>> -static int loongson_default_data(struct plat_stmmacenet_data *plat)
>> +static void loongson_default_data(struct plat_stmmacenet_data *plat)
>> {
>> plat->clk_csr = 2; /* clk_csr_i = 20-35MHz & MDC = clk_csr_i/16 */
>> plat->has_gmac = 1;
>> @@ -20,16 +20,14 @@ static int loongson_default_data(struct plat_stmmacenet_data *plat)
>> /* Set default value for multicast hash bins */
>> plat->multicast_filter_bins = 256;
>>
>> + plat->mac_interface = PHY_INTERFACE_MODE_NA;
>> +
>> /* Set default value for unicast filter entries */
>> plat->unicast_filter_entries = 1;
>>
>> /* Set the maxmtu to a default of JUMBO_LEN */
>> plat->maxmtu = JUMBO_LEN;
>>
>> - /* Set default number of RX and TX queues to use */
>> - plat->tx_queues_to_use = 1;
>> - plat->rx_queues_to_use = 1;
>> -
>> /* Disable Priority config by default */
>> plat->tx_queues_cfg[0].use_prio = false;
>> plat->rx_queues_cfg[0].use_prio = false;
>> @@ -42,6 +40,11 @@ static int loongson_default_data(struct plat_stmmacenet_data *plat)
>>
>> plat->dma_cfg->pbl = 32;
>> plat->dma_cfg->pblx8 = true;
>> +}
>> +
>> +static int loongson_gmac_data(struct plat_stmmacenet_data *plat)
>> +{
>> + loongson_default_data(plat);
>>
>> return 0;
>> }
>> @@ -111,11 +114,10 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
>> }
>>
>> plat->phy_interface = phy_mode;
>> - plat->mac_interface = PHY_INTERFACE_MODE_GMII;
>>
>> pci_set_master(pdev);
>>
>> - loongson_default_data(plat);
>> + loongson_gmac_data(plat);
>> pci_enable_msi(pdev);
>> memset(&res, 0, sizeof(res));
>> res.addr = pcim_iomap_table(pdev)[0];
>> @@ -140,6 +142,9 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
>> goto err_disable_msi;
>> }
>>
>> + plat->tx_queues_to_use = 1;
>> + plat->rx_queues_to_use = 1;
>> +
> Please move this to the loongson_gmac_data(). Thus all the
> platform-data initializations would be collected in two coherent
> methods: loongson_default_data() and loongson_gmac_data(). It will be
> positive from the readability and maintainability points of view.
OK, I will move this to the loongson_default_data(),
Because loongson_gmac/gnet_data() call it.
>
> In the patch adding the Loongson multi-channel GMAC support make sure
> the loongson_data::loongson_id field is initialized before the
> stmmac_pci_info::setup() method is called.
I've tried. It's almost impossible.
The only way to do this is to initialize loongson_id again in
loongson_default_data().
But that will add a lot of code.
Hmm, how about:
loongson_default_data() {
plat->tx_queues_to_use = 1;
plat->rx_queues_to_use = 1;
...
}
loongson_dwmac_probe() {
...
if (ld->loongson_id == DWMAC_CORE_LS2K2000) {
plat->rx_queues_to_use = CHANNEL_NUM;
plat->tx_queues_to_use = CHANNEL_NUM;
/* Only channel 0 supports checksum,
* so turn off checksum to enable multiple channels.
*/
for (i = 1; i < CHANNEL_NUM; i++)
plat->tx_queues_cfg[i].coe_unsupported = 1;
ret = loongson_dwmac_msi_config(pdev, plat, &res);
} else {
ret = loongson_dwmac_intx_config(pdev, plat, &res);
}
...
}
Thanks,
Yanteng
>
> -Serge(y)
>
>> ret = stmmac_dvr_probe(&pdev->dev, plat, &res);
>> if (ret)
>> goto err_disable_msi;
>> --
>> 2.31.4
>>
Powered by blists - more mailing lists