[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <io5eoyp7eq656fzrrd5htq3d7rc22tm7b5zpi6ynaoawhdb7sp@b5ydxzhtqg6x>
Date: Tue, 2 Jul 2024 11:28:45 +0300
From: Serge Semin <fancer.lancer@...il.com>
To: Yanteng Si <siyanteng@...ngson.cn>
Cc: andrew@...n.ch, hkallweit1@...il.com, peppe.cavallaro@...com,
alexandre.torgue@...s.st.com, joabreu@...opsys.com, Jose.Abreu@...opsys.com,
chenhuacai@...nel.org, linux@...linux.org.uk, guyinggang@...ngson.cn,
netdev@...r.kernel.org, chris.chenfeiyang@...il.com, si.yanteng@...ux.dev
Subject: Re: [PATCH net-next v13 06/15] net: stmmac: dwmac-loongson: Detach
GMAC-specific platform data init
On Wed, May 29, 2024 at 06:19:03PM +0800, Yanteng Si wrote:
> Loongson delivers two types of the network devices: Loongson GMAC and
> Loongson GNET in the framework of four CPU/Chipsets revisions:
>
> Chip Network PCI Dev ID Synopys Version DMA-channel
> LS2K1000 CPU GMAC 0x7a03 v3.50a/v3.73a 1
> LS7A1000 Chipset GMAC 0x7a03 v3.50a/v3.73a 1
> LS2K2000 CPU GNET 0x7a13 v3.73a 8
> LS7A2000 Chipset GNET 0x7a13 v3.73a 1
>
> The driver currently supports the chips with the Loongson GMAC network
> device. As a preparation before adding the Loongson GNET support
> detach the Loongson GMAC-specific platform data initializations to the
> loongson_gmac_data() method and preserve the common settings in the
> loongson_default_data().
>
> While at it drop the return value statement from the
> loongson_default_data() method as redundant.
Based on the last hardware setup insight Loongson GMAC with AV-feature
can be found on the LS2K2000 CPU. Thus the commit log should be:
"Loongson delivers two types of the network devices: Loongson GMAC and
Loongson GNET in the framework of four CPU/Chipsets revisions:
Chip Network PCI Dev ID Synopys Version DMA-channel
LS2K1000 CPU GMAC 0x7a03 v3.50a/v3.73a 1
LS7A1000 Chipset GMAC 0x7a03 v3.50a/v3.73a 1
LS2K2000 CPU GMAC 0x7a03 v3.73a 8
LS2K2000 CPU GNET 0x7a13 v3.73a 8
LS7A2000 Chipset GNET 0x7a13 v3.73a 1
The driver currently supports the chips with the Loongson GMAC network
device synthesized with a single DMA-channel available. As a
preparation before adding the Loongson GNET support detach the
Loongson GMAC-specific platform data initializations to the
loongson_gmac_data() method and preserve the common settings in the
loongson_default_data().
While at it drop the return value statement from the
loongson_default_data() method as redundant."
>
> Signed-off-by: Feiyang Chen <chenfeiyang@...ngson.cn>
> Signed-off-by: Yinggang Gu <guyinggang@...ngson.cn>
> Signed-off-by: Yanteng Si <siyanteng@...ngson.cn>
> ---
> .../ethernet/stmicro/stmmac/dwmac-loongson.c | 19 ++++++++++++-------
> 1 file changed, 12 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
> index 739b73f4fc35..ad3f44440963 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
> @@ -11,7 +11,7 @@
>
> #define PCI_DEVICE_ID_LOONGSON_GMAC 0x7a03
>
> -static int loongson_default_data(struct plat_stmmacenet_data *plat)
> +static void loongson_default_data(struct plat_stmmacenet_data *plat)
> {
> plat->clk_csr = 2; /* clk_csr_i = 20-35MHz & MDC = clk_csr_i/16 */
> plat->has_gmac = 1;
> @@ -20,16 +20,14 @@ static int loongson_default_data(struct plat_stmmacenet_data *plat)
> /* Set default value for multicast hash bins */
> plat->multicast_filter_bins = 256;
>
> + plat->mac_interface = PHY_INTERFACE_MODE_NA;
> +
> /* Set default value for unicast filter entries */
> plat->unicast_filter_entries = 1;
>
> /* Set the maxmtu to a default of JUMBO_LEN */
> plat->maxmtu = JUMBO_LEN;
>
> - /* Set default number of RX and TX queues to use */
> - plat->tx_queues_to_use = 1;
> - plat->rx_queues_to_use = 1;
> -
> /* Disable Priority config by default */
> plat->tx_queues_cfg[0].use_prio = false;
> plat->rx_queues_cfg[0].use_prio = false;
> @@ -42,6 +40,11 @@ static int loongson_default_data(struct plat_stmmacenet_data *plat)
>
> plat->dma_cfg->pbl = 32;
> plat->dma_cfg->pblx8 = true;
> +}
> +
> +static int loongson_gmac_data(struct plat_stmmacenet_data *plat)
> +{
> + loongson_default_data(plat);
>
> return 0;
> }
> @@ -111,11 +114,10 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
> }
>
> plat->phy_interface = phy_mode;
> - plat->mac_interface = PHY_INTERFACE_MODE_GMII;
>
> pci_set_master(pdev);
>
> - loongson_default_data(plat);
> + loongson_gmac_data(plat);
> pci_enable_msi(pdev);
> memset(&res, 0, sizeof(res));
> res.addr = pcim_iomap_table(pdev)[0];
> @@ -140,6 +142,9 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
> goto err_disable_msi;
> }
>
> + plat->tx_queues_to_use = 1;
> + plat->rx_queues_to_use = 1;
> +
Please move this to the loongson_gmac_data(). Thus all the
platform-data initializations would be collected in two coherent
methods: loongson_default_data() and loongson_gmac_data(). It will be
positive from the readability and maintainability points of view.
In the patch adding the Loongson multi-channel GMAC support make sure
the loongson_data::loongson_id field is initialized before the
stmmac_pci_info::setup() method is called.
-Serge(y)
> ret = stmmac_dvr_probe(&pdev->dev, plat, &res);
> if (ret)
> goto err_disable_msi;
> --
> 2.31.4
>
Powered by blists - more mailing lists