| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240704-cn9130-som-v7-5-eea606ba5faa@solid-run.com>
Date: Thu, 04 Jul 2024 17:03:23 +0200
From: Josua Mayer <josua@...id-run.com>
To: Andrew Lunn <andrew@...n.ch>,
Gregory Clement <gregory.clement@...tlin.com>,
Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>,
Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Richard Cochran <richardcochran@...il.com>
Cc: Yazan Shhady <yazan.shhady@...id-run.com>,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
Josua Mayer <josua@...id-run.com>
Subject: [PATCH v7 5/5] arm64: dts: add description for solidrun cn9132
cex7 module and clearfog board
Add description for the SolidRun CN9132 COM-Express Type 7 module, and
the Clearfog evaluation board.
The COM-Express module includes:
- CN9130 SoC
- 2x 88F8215 Southbridges
- eMMC
- SPI Flash
- DDR-4 SODIMM connector
- 1GBase-T Ethernet PHY
The Clearfog Evaluation board provides:
- 1x 10Gbps SFP+
- 2x 5GBase-T RJ45
- 4x 1GBase-T RJ45 on DSA switch with 2.5Gbps cpu link
- 1x full-size PCI-E x4
- 2x M.2 with PCI-E x1
- 1x M.2 with PCI-E x2
- 2x M.2 with PCI-E x1 and USB-2.0
- 1x M.2 with USB-2.0, USB-3.0 and 2x SIM slots
- 1x mini-PCI-E x1
- 2x SATA (Laptop-Style connector with data and power)
- 3x USB-3.0 Type-A
- microSD slot
Signed-off-by: Josua Mayer <josua@...id-run.com>
---
arch/arm64/boot/dts/marvell/Makefile | 1 +
arch/arm64/boot/dts/marvell/cn9132-clearfog.dts | 673 ++++++++++++++++++++++
arch/arm64/boot/dts/marvell/cn9132-sr-cex7.dtsi | 712 ++++++++++++++++++++++++
3 files changed, 1386 insertions(+)
diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile
index 16f9d7156d9f..ce751b5028e2 100644
--- a/arch/arm64/boot/dts/marvell/Makefile
+++ b/arch/arm64/boot/dts/marvell/Makefile
@@ -31,3 +31,4 @@ dtb-$(CONFIG_ARCH_MVEBU) += ac5-98dx35xx-rd.dtb
dtb-$(CONFIG_ARCH_MVEBU) += cn9130-cf-base.dtb
dtb-$(CONFIG_ARCH_MVEBU) += cn9130-cf-pro.dtb
dtb-$(CONFIG_ARCH_MVEBU) += cn9131-cf-solidwan.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += cn9132-clearfog.dtb
diff --git a/arch/arm64/boot/dts/marvell/cn9132-clearfog.dts b/arch/arm64/boot/dts/marvell/cn9132-clearfog.dts
new file mode 100644
index 000000000000..0f53745a6fa0
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9132-clearfog.dts
@@ -0,0 +1,673 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2024 Josua Mayer <josua@...id-run.com>
+ *
+ * DTS for SolidRun CN9132 Clearfog.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+#include "cn9130.dtsi"
+#include "cn9132-sr-cex7.dtsi"
+
+/ {
+ model = "SolidRun CN9132 Clearfog";
+ compatible = "solidrun,cn9132-clearfog",
+ "solidrun,cn9132-sr-cex7", "marvell,cn9130";
+
+ aliases {
+ ethernet1 = &cp0_eth2;
+ ethernet2 = &cp0_eth0;
+ ethernet3 = &cp2_eth0;
+ ethernet4 = &cp1_eth0;
+ i2c7 = &carrier_mpcie_i2c;
+ i2c8 = &carrier_ptp_i2c;
+ mmc1 = &cp0_sdhci0;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp1_wake0_pins>;
+
+ button-0 {
+ label = "SW2";
+ gpios = <&cp1_gpio2 8 GPIO_ACTIVE_LOW>;
+ linux,can-disable;
+ linux,code = <BTN_2>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp1_batlow_pins &cp2_rsvd4_pins>;
+
+ /* LED11 */
+ led-io-0 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_DISK;
+ function-enumerator = <0>;
+ default-state = "off";
+ gpios = <&cp1_gpio1 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* LED12 */
+ led-io-1 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_DISK;
+ function-enumerator = <1>;
+ default-state = "off";
+ gpios = <&cp2_gpio1 4 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ /* CON4 W_DISABLE1/W_DISABLE2 */
+ rfkill-m2-wlan {
+ compatible = "rfkill-gpio";
+ label = "m.2 wlan (CON4)";
+ radio-type = "wlan";
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp1_10g_phy_rst_01_pins>;
+ /* rfkill-gpio inverts internally */
+ shutdown-gpios = <&cp1_gpio2 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* CON5 W_DISABLE1/W_DISABLE2 */
+ rfkill-m2-wlan {
+ compatible = "rfkill-gpio";
+ label = "m.2 wlan (CON5)";
+ radio-type = "wlan";
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp1_10g_phy_rst_23_pins>;
+ /* rfkill-gpio inverts internally */
+ shutdown-gpios = <&cp1_gpio2 10 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* J21 W_DISABLE1 */
+ rfkill-m2-wwan {
+ compatible = "rfkill-gpio";
+ label = "m.2 wwan (J21)";
+ radio-type = "wwan";
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp2_rsvd3_pins>;
+ /* rfkill-gpio inverts internally */
+ shutdown-gpios = <&cp2_gpio1 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* J21 W_DISABLE1 */
+ rfkill-m2-gnss {
+ compatible = "rfkill-gpio";
+ label = "m.2 gnss (J21)";
+ radio-type = "gps";
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp2_rsvd8_pins>;
+ /* rfkill-gpio inverts internally */
+ shutdown-gpios = <&cp2_gpio1 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* J14 W_DISABLE */
+ rfkill-mpcie-wlan {
+ compatible = "rfkill-gpio";
+ label = "mpcie wlan (J14)";
+ radio-type = "wlan";
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp2_rsvd2_pins>;
+ /* rfkill-gpio inverts internally */
+ shutdown-gpios = <&cp2_gpio1 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ sfp: sfp {
+ compatible = "sff,sfp";
+ i2c-bus = <&com_10g_sfp_i2c0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&com_10g_int0_pins>;
+ mod-def0-gpios = <&cp0_gpio1 24 GPIO_ACTIVE_LOW>;
+ maximum-power-milliwatt = <2000>;
+ };
+};
+
+&com_smbus {
+ /* This bus is also routed to STM32 BMC Microcontroller (U2) */
+
+ power-sensor@40 {
+ compatible = "ti,ina220";
+ reg = <0x40>;
+ #io-channel-cells = <1>;
+ label = "vdd_12v0";
+ shunt-resistor = <2000>;
+ };
+
+ adc@48 {
+ compatible = "ti,tla2021";
+ reg = <0x48>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* supplied by chaoskey hardware noise generator circuit */
+ channel@0 {
+ reg = <0>;
+ };
+ };
+};
+
+&cp0_eth_phy0 {
+ /*
+ * Configure LEDs default behaviour:
+ * - LED[0]: link is 1000Mbps: On (yellow): 0111
+ * - LED[1]: link/activity: On/Blink (green): 0001
+ * - LED[2]: Off (green): 1000
+ */
+ marvell,reg-init = <3 16 0xf000 0x0817>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ /* link */
+ reg = <0>;
+ color = <LED_COLOR_ID_YELLOW>;
+ function = LED_FUNCTION_LAN;
+ default-state = "keep";
+ };
+
+ led@1 {
+ /* act */
+ reg = <1>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ default-state = "keep";
+ };
+
+ led@2 {
+ /* 1000 */
+ reg = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ default-state = "keep";
+ };
+ };
+};
+
+/* SRDS #4 - 10GE */
+&cp0_eth0 {
+ phys = <&cp0_comphy4 0>;
+ phy-mode = "10gbase-r";
+ managed = "in-band-status";
+ sfp = <&sfp>;
+ status = "okay";
+};
+
+&cp0_eth2 {
+ phy-mode = "2500base-x";
+ phys = <&cp0_comphy5 2>;
+ status = "okay";
+
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ pause;
+ };
+};
+
+&cp0_i2c1 {
+ /*
+ * Both COM and Carrier Board have a PCA9547 i2c mux at 0x77.
+ * Describe them as a single device merging each child bus.
+ */
+
+ i2c-mux@77 {
+ i2c@0 {
+ /* Routed to Full PCIe (J4) */
+ };
+
+ i2c@1 {
+ /* Routed to USB Hub (U29) */
+ };
+
+ i2c@2 {
+ /* Routed to M.2 (CON4) */
+ };
+
+ i2c@3 {
+ /* Routed to M.2 (CON5) */
+ };
+
+ i2c@4 {
+ /* Routed to M.2 (J21) */
+ };
+
+ carrier_mpcie_i2c: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+
+ /* Routed to mini-PCIe (J14) */
+ };
+
+ carrier_ptp_i2c: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+
+ /* Routed to various optional PTP related components */
+ };
+ };
+};
+
+&cp0_mdio {
+ ethernet-switch@4 {
+ compatible = "marvell,mv88e6085";
+ reg = <4>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sw_phy1: ethernet-phy@1 {
+ reg = <0x11>;
+ };
+
+ sw_phy2: ethernet-phy@2 {
+ reg = <0x12>;
+ };
+
+ sw_phy3: ethernet-phy@3 {
+ reg = <0x13>;
+ };
+
+ sw_phy4: ethernet-phy@4 {
+ reg = <0x14>;
+ };
+ };
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet-port@1 {
+ reg = <1>;
+ label = "lan1";
+ phy-handle = <&sw_phy1>;
+ phy-mode = "internal";
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ default-state = "keep";
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_YELLOW>;
+ function = LED_FUNCTION_LAN;
+ default-state = "keep";
+ };
+ };
+ };
+
+ ethernet-port@2 {
+ reg = <2>;
+ label = "lan2";
+ phy-handle = <&sw_phy2>;
+ phy-mode = "internal";
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ default-state = "keep";
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_YELLOW>;
+ function = LED_FUNCTION_LAN;
+ default-state = "keep";
+ };
+ };
+ };
+
+ ethernet-port@3 {
+ reg = <3>;
+ label = "lan3";
+ phy-handle = <&sw_phy3>;
+ phy-mode = "internal";
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ default-state = "keep";
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_YELLOW>;
+ function = LED_FUNCTION_LAN;
+ default-state = "keep";
+ };
+ };
+ };
+
+ ethernet-port@4 {
+ reg = <4>;
+ label = "lan4";
+ phy-handle = <&sw_phy4>;
+ phy-mode = "internal";
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ default-state = "keep";
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_YELLOW>;
+ function = LED_FUNCTION_LAN;
+ default-state = "keep";
+ };
+ };
+ };
+
+ ethernet-port@5 {
+ reg = <5>;
+ label = "cpu";
+ ethernet = <&cp0_eth2>;
+ phy-mode = "2500base-x";
+
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ pause;
+ };
+ };
+ };
+ };
+};
+
+/* SRDS #0,#1,#2,#3 - PCIe */
+&cp0_pcie0 {
+ num-lanes = <4>;
+ phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>, <&cp0_comphy2 0>, <&cp0_comphy3 0>;
+ status = "okay";
+};
+
+&cp0_pinctrl {
+ /*
+ * configure unused gpios exposed via pin headers:
+ * - J7-10: PWRBTN
+ */
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_pwrbtn_pins>;
+};
+
+/* microSD */
+&cp0_sdhci0 {
+ pinctrl-0 = <&cp0_mmc0_pins>, <&cp0_mmc0_cd_pins>;
+ pinctrl-names = "default";
+ bus-width = <4>;
+ no-1-8-v;
+ status = "okay";
+};
+
+&cp0_spi1 {
+ /* add CS1 */
+ pinctrl-0 = <&cp0_spi1_pins>, <&cp0_spi1_cs1_pins>;
+
+ flash@1 {
+ compatible = "jedec,spi-nor";
+ reg = <1>;
+ /* read command supports max. 50MHz */
+ spi-max-frequency = <50000000>;
+ };
+};
+
+/* J38 */
+&cp0_uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_uart2_pins>;
+ status = "okay";
+};
+
+&cp0_utmi {
+ /* M.2 "CON5" swaps D+/D- */
+ swap-dx-lanes = <1>;
+};
+
+&cp1_ethernet {
+ status = "okay";
+};
+
+/* SRDS #2 - 5GE */
+&cp1_eth0 {
+ phys = <&cp1_comphy2 0>;
+ phy-mode = "5gbase-r";
+ phy = <&cp1_eth_phy0>;
+ managed = "in-band-status";
+ status = "okay";
+};
+
+/* SRDS #0,#1 - PCIe */
+&cp1_pcie0 {
+ num-lanes = <2>;
+ phys = <&cp1_comphy0 0>, <&cp1_comphy1 0>;
+ status = "okay";
+};
+
+/* SRDS #4 - PCIe */
+&cp1_pcie1 {
+ num-lanes = <1>;
+ phys = <&cp1_comphy4 1>;
+ status = "okay";
+};
+
+/* SRDS #5 - PCIe */
+&cp1_pcie2 {
+ num-lanes = <1>;
+ phys = <&cp1_comphy5 2>;
+ status = "okay";
+};
+
+&cp1_pinctrl {
+ /*
+ * configure unused gpios exposed via pin headers:
+ * - J7-8: RSVD16
+ * - J7-10: THRM
+ * - J10-1: WAKE1
+ * - J10-2: SATA_ACT
+ * - J10-8: THERMTRIP
+ */
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp1_rsvd16_pins &cp1_sata_act_pins &cp1_thrm_irq_pins>,
+ <&cp1_thrm_trip_pins &cp1_wake1_pins>;
+};
+
+/* SRDS #3 - SATA */
+&cp1_sata0 {
+ status = "okay";
+
+ /* only port 1 is available */
+ /delete-node/ sata-port@0;
+
+ sata-port@1 {
+ phys = <&cp1_comphy3 1>;
+ };
+};
+
+&cp1_utmi {
+ /* M.2 "CON4" swaps D+/D- */
+ swap-dx-lanes = <0>;
+};
+
+&cp1_xmdio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp1_xmdio_pins>;
+ status = "okay";
+
+ cp1_eth_phy0: ethernet-phy@8 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <8>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&com_10g_int1_pins>;
+ interrupt-parent = <&cp1_gpio2>;
+ interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_YELLOW>;
+ function = LED_FUNCTION_LAN;
+ default-state = "keep";
+ };
+
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ default-state = "keep";
+ };
+ };
+ };
+};
+
+&cp2_ethernet {
+ status = "okay";
+};
+
+/* SRDS #2 - 5GE */
+&cp2_eth0 {
+ phys = <&cp2_comphy2 0>;
+ phy-mode = "5gbase-r";
+ phy = <&cp2_eth_phy0>;
+ managed = "in-band-status";
+ status = "okay";
+};
+
+&cp2_gpio1 {
+ pinctrl-names= "default";
+ pinctrl-0 = <&cp2_rsvd9_pins>;
+
+ /* J21 */
+ m2-wwan-reset-hog {
+ gpio-hog;
+ gpios = <9 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+ output-low;
+ line-name = "m2-wwan-reset";
+ };
+};
+
+/* SRDS #0 - PCIe */
+&cp2_pcie0 {
+ num-lanes = <1>;
+ phys = <&cp2_comphy0 0>;
+ status = "okay";
+};
+
+/* SRDS #4 - PCIe */
+&cp2_pcie1 {
+ num-lanes = <1>;
+ phys = <&cp2_comphy4 1>;
+ status = "okay";
+};
+
+/* SRDS #5 - PCIe */
+&cp2_pcie2 {
+ num-lanes = <1>;
+ phys = <&cp2_comphy5 2>;
+ status = "okay";
+};
+
+&cp2_pinctrl {
+ /*
+ * configure unused gpios exposed via pin headers:
+ * - J7-1: RSVD10
+ * - J7-3: RSVD11
+ * - J7-5: RSVD56
+ * - J7-6: RSVD7
+ * - J7-7: RSVD27
+ * - J10-3: RSVD31
+ * - J10-5: RSVD5
+ * - J10-6: RSVD32
+ * - J10-7: RSVD0
+ * - J10-9: RSVD1
+ */
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp2_rsvd0_pins &cp2_rsvd1_pins &cp2_rsvd5_pins>,
+ <&cp2_rsvd7_pins &cp2_rsvd10_pins &cp2_rsvd11_pins>,
+ <&cp2_rsvd27_pins &cp2_rsvd31_pins &cp2_rsvd32_pins>,
+ <&cp2_rsvd56_pins>;
+};
+
+/* SRDS #3 - SATA */
+&cp2_sata0 {
+ status = "okay";
+
+ /* only port 1 is available */
+ /delete-node/ sata-port@0;
+
+ sata-port@1 {
+ phys = <&cp2_comphy3 1>;
+ };
+};
+
+&cp2_xmdio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp2_xmdio_pins>;
+ status = "okay";
+
+ cp2_eth_phy0: ethernet-phy@8 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <8>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&com_10g_int2_pins>;
+ interrupt-parent = <&cp2_gpio2>;
+ interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_YELLOW>;
+ function = LED_FUNCTION_LAN;
+ default-state = "keep";
+ };
+
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ default-state = "keep";
+ };
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/marvell/cn9132-sr-cex7.dtsi b/arch/arm64/boot/dts/marvell/cn9132-sr-cex7.dtsi
new file mode 100644
index 000000000000..afc041c1c448
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9132-sr-cex7.dtsi
@@ -0,0 +1,712 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2024 Josua Mayer <josua@...id-run.com>
+ *
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/*
+ * Instantiate the first external CP115
+ */
+
+#define CP11X_NAME cp1
+#define CP11X_BASE f4000000
+#define CP11X_PCIEx_MEM_BASE(iface) (0xe2000000 + (iface * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
+#define CP11X_PCIE0_BASE f4600000
+#define CP11X_PCIE1_BASE f4620000
+#define CP11X_PCIE2_BASE f4640000
+
+#include "armada-cp115.dtsi"
+
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
+
+/*
+ * Instantiate the second external CP115
+ */
+
+#define CP11X_NAME cp2
+#define CP11X_BASE f6000000
+#define CP11X_PCIEx_MEM_BASE(iface) (0xe5000000 + (iface * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
+#define CP11X_PCIE0_BASE f6600000
+#define CP11X_PCIE1_BASE f6620000
+#define CP11X_PCIE2_BASE f6640000
+
+#include "armada-cp115.dtsi"
+
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
+
+/ {
+ model = "SolidRun CN9132 COM Express Type 7 Module";
+ compatible = "solidrun,cn9132-sr-cex7", "marvell,cn9130";
+
+ aliases {
+ ethernet0 = &cp0_eth1;
+ gpio3 = &cp1_gpio1;
+ gpio4 = &cp1_gpio2;
+ gpio5 = &cp2_gpio1;
+ gpio6 = &cp2_gpio2;
+ i2c0 = &cp0_i2c0;
+ i2c1 = &cp0_i2c1;
+ i2c2 = &com_clkgen_i2c;
+ i2c3 = &com_10g_led_i2c;
+ i2c4 = &com_10g_sfp_i2c0;
+ i2c5 = &com_smbus;
+ i2c6 = &com_fanctrl_i2c;
+ mmc0 = &ap_sdhci0;
+ rtc0 = &cp0_rtc;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ fan: pwm-fan {
+ compatible = "pwm-fan";
+ cooling-levels = <0 51 102 153 204 255>;
+ #cooling-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_fan_pwm_pins &cp0_fan_tacho_pins>;
+ pwms = <&cp0_gpio2 7 40000>;
+ interrupt-parent = <&cp0_gpio1>;
+ interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+ };
+
+ v_1_8: regulator-1-8 {
+ compatible = "regulator-fixed";
+ regulator-name = "1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ap_vhv: regulator-ap-vhv-1-8 {
+ compatible = "regulator-fixed";
+ regulator-name = "ap-vhv-1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ pinctrl-0 = <&cp0_reg_ap_vhv_pins>;
+ pinctrl-names = "default";
+ gpios = <&cp0_gpio2 21 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ cp_vhv: regulator-cp-vhv-1-8 {
+ compatible = "regulator-fixed";
+ regulator-name = "cp-vhv-1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ pinctrl-0 = <&cp0_reg_cp_vhv_pins>;
+ pinctrl-names = "default";
+ gpios = <&cp0_gpio2 17 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&ap_pinctrl {
+ ap_mmc0_pins: ap-mmc0-pins {
+ marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", "mpp4", "mpp5",
+ "mpp6", "mpp7", "mpp8", "mpp9", "mpp10", "mpp12";
+ marvell,function = "sdio";
+ /*
+ * mpp12 is emmc reset, function should be sdio (hw_rst),
+ * but pinctrl-mvebu does not support this.
+ *
+ * From pinctrl-mvebu.h:
+ * "The name will be used to switch to this setting in DT description, e.g.
+ * marvell,function = "uart2". subname is only for debugging purposes."
+ */
+ };
+};
+
+&ap_sdhci0 {
+ bus-width = <8>;
+ pinctrl-0 = <&ap_mmc0_pins>;
+ pinctrl-names = "default";
+ vqmmc-supply = <&v_1_8>;
+ status = "okay";
+};
+
+&ap_thermal_ic {
+ polling-delay = <1000>;
+
+ trips {
+ ap_active: trip-active {
+ temperature = <40000>;
+ hysteresis = <4000>;
+ type = "active";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&ap_active>;
+ cooling-device = <&fan THERMAL_NO_LIMIT 4>;
+ };
+
+ map1 {
+ trip = <&ap_crit>;
+ cooling-device = <&fan 4 5>;
+ };
+ };
+};
+
+&cp0_ethernet {
+ status = "okay";
+};
+
+&cp0_eth1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_eth1_pins>;
+ phy-mode = "rgmii-id";
+ phy = <&cp0_eth_phy0>;
+ status = "okay";
+};
+
+&cp0_gpio1 {
+ status = "okay";
+
+ /*
+ * Tacho signal used as interrupt source by pwm-fan driver.
+ * Hog IO as input to ensure mvebu-gpio irq driver`s
+ * irq_set_type can succeed.
+ */
+ pwm-tacho-irq-hog {
+ gpio-hog;
+ gpios = <26 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+ input;
+ line-name = "fan-tacho";
+ };
+};
+
+&cp0_gpio2 {
+ status = "okay";
+};
+
+&cp0_i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_i2c0_pins>;
+ clock-frequency = <100000>;
+ status = "okay";
+
+ com_eeprom: eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ pagesize = <8>;
+ };
+
+ eeprom@53 {
+ compatible = "atmel,spd";
+ reg = <0x53>;
+ };
+};
+
+&cp0_i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_i2c1_pins>;
+ clock-frequency = <100000>;
+ status = "okay";
+
+ i2c-mux@77 {
+ compatible = "nxp,pca9547";
+ reg = <0x77>;
+ i2c-mux-idle-disconnect;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ com_clkgen_i2c: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ /* clock-controller@6b */
+ };
+
+ com_10g_led_i2c: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ /* Routed to B2B Connector as I2C_10G_LED_SCL/SDA */
+ };
+
+ com_10g_sfp_i2c0: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ /* Routed to B2B Connector as I2C_SFP0_CP0_SCL/SDA */
+ };
+
+ com_smbus: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ /* Routed to B2B Connector as SBM_CLK/DAT */
+ };
+
+ com_fanctrl_i2c: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+
+ /* fan-controller@2f (assembly option) */
+ };
+ };
+};
+
+&cp0_mdio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_mdio_pins>;
+ status = "okay";
+
+ cp0_eth_phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+&cp0_spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_spi1_pins>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ /* read command supports max. 50MHz */
+ spi-max-frequency = <50000000>;
+ };
+};
+
+&cp0_syscon0 {
+ cp0_pinctrl: pinctrl {
+ compatible = "marvell,cp115-standalone-pinctrl";
+
+ com_10g_int0_pins: cp0-10g-int-pins {
+ marvell,pins = "mpp24";
+ marvell,function = "gpio";
+ };
+
+ cp0_eth1_pins: cp0-eth1-pins {
+ marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
+ "mpp4", "mpp5", "mpp6", "mpp7",
+ "mpp8", "mpp9", "mpp10", "mpp11";
+ /* docs call it "ge1", but cp110-pinctrl "ge0" */
+ marvell,function = "ge0";
+ };
+
+ cp0_fan_pwm_pins: cp0-fan-pwm-pins {
+ marvell,pins = "mpp39";
+ marvell,function = "gpio";
+ };
+
+ cp0_fan_tacho_pins: cp0-fan-tacho-pins {
+ marvell,pins = "mpp26";
+ marvell,function = "gpio";
+ };
+
+ cp0_i2c0_pins: cp0-i2c0-pins {
+ marvell,pins = "mpp37", "mpp38";
+ marvell,function = "i2c0";
+ };
+
+ cp0_i2c1_pins: cp0-i2c1-pins {
+ marvell,pins = "mpp35", "mpp36";
+ marvell,function = "i2c1";
+ };
+
+ cp0_mdio_pins: cp0-mdio-pins {
+ marvell,pins = "mpp40", "mpp41";
+ marvell,function = "ge";
+ };
+
+ cp0_mmc0_pins: cp0-mmc0-pins {
+ marvell,pins = "mpp56", "mpp57", "mpp58", "mpp59",
+ "mpp60", "mpp61";
+ marvell,function = "sdio";
+ };
+
+ cp0_mmc0_cd_pins: cp0-mmc0-cd-pins {
+ marvell,pins = "mpp55";
+ marvell,function = "sdio_cd";
+ };
+
+ cp0_pwrbtn_pins: cp0-pwrbtn-pins {
+ marvell,pins = "mpp31";
+ marvell,function = "gpio";
+ };
+
+ cp0_reg_ap_vhv_pins: cp0-reg-ap-vhv-pins {
+ marvell,pins = "mpp53";
+ marvell,function = "gpio";
+ };
+
+ cp0_reg_cp_vhv_pins: cp0-reg-cp-vhv-pins {
+ marvell,pins = "mpp49";
+ marvell,function = "gpio";
+ };
+
+ cp0_spi1_pins: cp0-spi1-pins {
+ marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
+ marvell,function = "spi1";
+ };
+
+ cp0_spi1_cs1_pins: cp0-spi1-cs1-pins {
+ marvell,pins = "mpp12";
+ marvell,function = "spi1";
+ };
+
+ cp0_uart2_pins: cp0-uart2-pins {
+ marvell,pins = "mpp50", "mpp51";
+ marvell,function = "uart2";
+ };
+ };
+};
+
+&cp0_thermal_ic {
+ polling-delay = <1000>;
+
+ trips {
+ cp0_active: trip-active {
+ temperature = <40000>;
+ hysteresis = <4000>;
+ type = "active";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cp0_active>;
+ cooling-device = <&fan THERMAL_NO_LIMIT 4>;
+ };
+
+ map1 {
+ trip = <&cp0_crit>;
+ cooling-device = <&fan 4 5>;
+ };
+ };
+};
+
+/* USB-2.0 Host */
+&cp0_usb3_0 {
+ phys = <&cp0_utmi0>;
+ phy-names = "utmi";
+ dr_mode = "host";
+ status = "okay";
+};
+
+/* USB-2.0 Host */
+&cp0_usb3_1 {
+ phys = <&cp0_utmi1>;
+ phy-names = "utmi";
+ dr_mode = "host";
+ status = "okay";
+};
+
+&cp0_utmi {
+ status = "okay";
+};
+
+&cp1_gpio1 {
+ status = "okay";
+};
+
+&cp1_gpio2 {
+ status = "okay";
+};
+
+&cp1_rtc {
+ status = "disabled";
+};
+
+&cp1_spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp1_spi1_pins>;
+ status = "okay";
+
+ tpm@0 {
+ reg = <0>;
+ compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+ spi-max-frequency = <10000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp1_tpm_irq_pins>;
+ interrupt-parent = <&cp1_gpio1>;
+ interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&cp1_syscon0 {
+ cp1_pinctrl: pinctrl {
+ compatible = "marvell,cp115-standalone-pinctrl";
+
+ com_10g_int1_pins: cp1-10g-int-pins {
+ marvell,pins = "mpp50";
+ marvell,function = "gpio";
+ };
+
+ cp1_10g_phy_rst_01_pins: cp1-10g-phy-rst-01-pins {
+ marvell,pins = "mpp43";
+ marvell,function = "gpio";
+ };
+
+ cp1_10g_phy_rst_23_pins: cp1-10g-phy-rst-23-pins {
+ marvell,pins = "mpp42";
+ marvell,function = "gpio";
+ };
+
+ cp1_batlow_pins: cp1-batlow-pins {
+ marvell,pins = "mpp11";
+ marvell,function = "gpio";
+ };
+
+ cp1_rsvd16_pins: cp1-rsvd16-pins {
+ marvell,pins = "mpp29";
+ marvell,function = "gpio";
+ };
+
+ cp1_sata_act_pins: cp1-sata-act-pins {
+ marvell,pins = "mpp39";
+ marvell,function = "gpio";
+ };
+
+ cp1_spi1_pins: cp1-spi1-pins {
+ marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
+ marvell,function = "spi1";
+ };
+
+ cp1_thrm_irq_pins: cp1-thrm-irq-pins {
+ marvell,pins = "mpp34";
+ marvell,function = "gpio";
+ };
+
+ cp1_thrm_trip_pins: cp1-thrm-trip-pins {
+ marvell,pins = "mpp33";
+ marvell,function = "gpio";
+ };
+
+ cp1_tpm_irq_pins: cp1-tpm-irq-pins {
+ marvell,pins = "mpp17";
+ marvell,function = "gpio";
+ };
+
+ cp1_wake0_pins: cp1-wake0-pins {
+ marvell,pins = "mpp40";
+ marvell,function = "gpio";
+ };
+
+ cp1_wake1_pins: cp1-wake1-pins {
+ marvell,pins = "mpp51";
+ marvell,function = "gpio";
+ };
+
+ cp1_xmdio_pins: cp1-xmdio-pins {
+ marvell,pins = "mpp37", "mpp38";
+ marvell,function = "xg";
+ };
+ };
+};
+
+&cp1_thermal_ic {
+ polling-delay = <1000>;
+
+ trips {
+ cp1_active: trip-active {
+ temperature = <40000>;
+ hysteresis = <4000>;
+ type = "active";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cp1_active>;
+ cooling-device = <&fan THERMAL_NO_LIMIT 4>;
+ };
+
+ map1 {
+ trip = <&cp1_crit>;
+ cooling-device = <&fan 4 5>;
+ };
+ };
+};
+
+/* USB-2.0 Host */
+&cp1_usb3_0 {
+ phys = <&cp1_utmi0>;
+ phy-names = "utmi";
+ dr_mode = "host";
+ status = "okay";
+};
+
+&cp1_utmi {
+ status = "okay";
+};
+
+&cp2_ethernet {
+ status = "okay";
+};
+
+&cp2_gpio1 {
+ status = "okay";
+};
+
+&cp2_gpio2 {
+ status = "okay";
+};
+
+&cp2_rtc {
+ status = "disabled";
+};
+
+&cp2_syscon0 {
+ cp2_pinctrl: pinctrl {
+ compatible = "marvell,cp115-standalone-pinctrl";
+
+ com_10g_int2_pins: cp2-10g-int-pins {
+ marvell,pins = "mpp50";
+ marvell,function = "gpio";
+ };
+
+ cp2_rsvd0_pins: cp2-rsvd0-pins {
+ marvell,pins = "mpp0";
+ marvell,function = "gpio";
+ };
+
+ cp2_rsvd1_pins: cp2-rsvd1-pins {
+ marvell,pins = "mpp1";
+ marvell,function = "gpio";
+ };
+
+ cp2_rsvd2_pins: cp2-rsvd2-pins {
+ marvell,pins = "mpp2";
+ marvell,function = "gpio";
+ };
+
+ cp2_rsvd3_pins: cp2-rsvd3-pins {
+ marvell,pins = "mpp3";
+ marvell,function = "gpio";
+ };
+
+ cp2_rsvd4_pins: cp2-rsvd4-pins {
+ marvell,pins = "mpp4";
+ marvell,function = "gpio";
+ };
+
+ cp2_rsvd5_pins: cp2-rsvd5-pins {
+ marvell,pins = "mpp54";
+ marvell,function = "gpio";
+ };
+
+ cp2_rsvd7_pins: cp2-rsvd7-pins {
+ marvell,pins = "mpp7";
+ marvell,function = "gpio";
+ };
+
+ cp2_rsvd8_pins: cp2-rsvd8-pins {
+ marvell,pins = "mpp8";
+ marvell,function = "gpio";
+ };
+
+ cp2_rsvd9_pins: cp2-rsvd9-pins {
+ marvell,pins = "mpp9";
+ marvell,function = "gpio";
+ };
+
+ cp2_rsvd10_pins: cp2-rsvd10-pins {
+ marvell,pins = "mpp10";
+ marvell,function = "gpio";
+ };
+
+ cp2_rsvd11_pins: cp2-rsvd11-pins {
+ marvell,pins = "mpp11";
+ marvell,function = "gpio";
+ };
+
+ cp2_rsvd27_pins: cp2-rsvd27-pins {
+ marvell,pins = "mpp11";
+ marvell,function = "gpio";
+ };
+
+ cp2_rsvd31_pins: cp2-rsvd31-pins {
+ marvell,pins = "mpp31";
+ marvell,function = "gpio";
+ };
+
+ cp2_rsvd32_pins: cp2-rsvd32-pins {
+ marvell,pins = "mpp32";
+ marvell,function = "gpio";
+ };
+
+ cp2_rsvd55_pins: cp2-rsvd55-pins {
+ marvell,pins = "mpp55";
+ marvell,function = "gpio";
+ };
+
+ cp2_rsvd56_pins: cp2-rsvd56-pins {
+ marvell,pins = "mpp56";
+ marvell,function = "gpio";
+ };
+
+ cp2_xmdio_pins: cp2-xmdio-pins {
+ marvell,pins = "mpp37", "mpp38";
+ marvell,function = "xg";
+ };
+ };
+};
+
+&cp2_thermal_ic {
+ polling-delay = <1000>;
+
+ trips {
+ cp2_active: trip-active {
+ temperature = <40000>;
+ hysteresis = <4000>;
+ type = "active";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cp2_active>;
+ cooling-device = <&fan THERMAL_NO_LIMIT 4>;
+ };
+
+ map1 {
+ trip = <&cp2_crit>;
+ cooling-device = <&fan 4 5>;
+ };
+ };
+};
+
+/* USB-2.0/3.0 Host */
+&cp2_usb3_0 {
+ phys = <&cp2_utmi0>, <&cp2_comphy1 0>;
+ phy-names = "utmi", "comphy";
+ dr_mode = "host";
+ status = "okay";
+};
+
+&cp2_utmi {
+ status = "okay";
+};
+
+/* AP default console */
+&uart0 {
+ pinctrl-0 = <&uart0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
--
2.35.3
Powered by blists - more mailing lists