lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <Zqxm3MdSUWr2KMV0@mev-dev.igk.intel.com>
Date: Fri, 2 Aug 2024 06:55:56 +0200
From: Michal Swiatkowski <michal.swiatkowski@...ux.intel.com>
To: Jiri Pirko <jiri@...nulli.us>
Cc: Tony Nguyen <anthony.l.nguyen@...el.com>, davem@...emloft.net,
	kuba@...nel.org, pabeni@...hat.com, edumazet@...gle.com,
	netdev@...r.kernel.org, Piotr Raczynski <piotr.raczynski@...el.com>,
	jiri@...dia.com, shayd@...dia.com, wojciech.drewek@...el.com,
	horms@...nel.org, sridhar.samudrala@...el.com,
	mateusz.polchlopek@...el.com, kalesh-anakkur.purayil@...adcom.com,
	michal.kubiak@...el.com, pio.raczynski@...il.com,
	przemyslaw.kitszel@...el.com, jacob.e.keller@...el.com,
	maciej.fijalkowski@...el.com,
	Rafal Romanowski <rafal.romanowski@...el.com>
Subject: Re: [PATCH net-next v2 15/15] ice: allow to activate and deactivate
 subfunction

On Thu, Aug 01, 2024 at 04:59:53PM +0200, Jiri Pirko wrote:
> Thu, Aug 01, 2024 at 12:10:26AM CEST, anthony.l.nguyen@...el.com wrote:
> >From: Piotr Raczynski <piotr.raczynski@...el.com>
> >
> >Use previously implemented SF aux driver. It is probe during SF
> >activation and remove after deactivation.
> >
> >Reviewed-by: Simon Horman <horms@...nel.org>
> >Signed-off-by: Piotr Raczynski <piotr.raczynski@...el.com>
> >Signed-off-by: Michal Swiatkowski <michal.swiatkowski@...ux.intel.com>
> >Tested-by: Rafal Romanowski <rafal.romanowski@...el.com>
> >Signed-off-by: Tony Nguyen <anthony.l.nguyen@...el.com>
> >---
> > .../ethernet/intel/ice/devlink/devlink_port.c | 173 ++++++++++++++++++
> > .../ethernet/intel/ice/devlink/devlink_port.h |   7 +
> > drivers/net/ethernet/intel/ice/ice_sf_eth.c   | 107 +++++++++++
> > drivers/net/ethernet/intel/ice/ice_sf_eth.h   |   3 +
> > 4 files changed, 290 insertions(+)
> >
> >diff --git a/drivers/net/ethernet/intel/ice/devlink/devlink_port.c b/drivers/net/ethernet/intel/ice/devlink/devlink_port.c
> >index 4cfd90581d92..4abdc40d345e 100644
> >--- a/drivers/net/ethernet/intel/ice/devlink/devlink_port.c
> >+++ b/drivers/net/ethernet/intel/ice/devlink/devlink_port.c
> >@@ -530,6 +530,42 @@ void ice_devlink_destroy_sf_dev_port(struct ice_sf_dev *sf_dev)
> > 	devl_port_unregister(&sf_dev->priv->devlink_port);
> > }
> > 
> >+/**
> >+ * ice_activate_dynamic_port - Activate a dynamic port
> >+ * @dyn_port: dynamic port instance to activate
> >+ * @extack: extack for reporting error messages
> >+ *
> >+ * Activate the dynamic port based on its flavour.
> >+ *
> >+ * Return: zero on success or an error code on failure.
> >+ */
> >+static int
> >+ice_activate_dynamic_port(struct ice_dynamic_port *dyn_port,
> >+			  struct netlink_ext_ack *extack)
> >+{
> >+	int err;
> >+
> >+	err = ice_sf_eth_activate(dyn_port, extack);
> >+	if (err)
> >+		return err;
> >+
> >+	dyn_port->active = true;
> >+
> >+	return 0;
> >+}
> >+
> >+/**
> >+ * ice_deactivate_dynamic_port - Deactivate a dynamic port
> >+ * @dyn_port: dynamic port instance to deactivate
> >+ *
> >+ * Undo activation of a dynamic port.
> >+ */
> >+static void ice_deactivate_dynamic_port(struct ice_dynamic_port *dyn_port)
> >+{
> 
> You set "active" flag here and in the function above. Why do you check
> it outside? (ice_dealloc_dynamic_port()/ice_devlink_port_fn_state_set()) 
> Just move the check here.
> 
> Similar for the "!active" check.

I can do that.

> 
> 
> >+	ice_sf_eth_deactivate(dyn_port);
> >+	dyn_port->active = false;
> >+}
> >+
> > /**
> >  * ice_dealloc_dynamic_port - Deallocate and remove a dynamic port
> >  * @dyn_port: dynamic port instance to deallocate
> >@@ -542,6 +578,9 @@ static void ice_dealloc_dynamic_port(struct ice_dynamic_port *dyn_port)
> > 	struct devlink_port *devlink_port = &dyn_port->devlink_port;
> > 	struct ice_pf *pf = dyn_port->pf;
> > 
> >+	if (dyn_port->active)
> >+		ice_deactivate_dynamic_port(dyn_port);
> >+
> > 	xa_erase(&pf->sf_nums, devlink_port->attrs.pci_sf.sf);
> > 	ice_eswitch_detach_sf(pf, dyn_port);
> > 	ice_vsi_free(dyn_port->vsi);
> >@@ -629,8 +668,142 @@ ice_devlink_port_del(struct devlink *devlink, struct devlink_port *port,
> > 	return 0;
> > }
> > 
> >+/**
> >+ * ice_devlink_port_fn_hw_addr_set - devlink handler for mac address set
> >+ * @port: pointer to devlink port
> >+ * @hw_addr: hw address to set
> >+ * @hw_addr_len: hw address length
> >+ * @extack: extack for reporting error messages
> >+ *
> >+ * Sets mac address for the port, verifies arguments and copies address
> >+ * to the subfunction structure.
> >+ *
> >+ * Return: zero on success or an error code on failure.
> >+ */
> >+static int
> >+ice_devlink_port_fn_hw_addr_set(struct devlink_port *port, const u8 *hw_addr,
> >+				int hw_addr_len,
> >+				struct netlink_ext_ack *extack)
> >+{
> >+	struct ice_dynamic_port *dyn_port;
> >+
> >+	dyn_port = ice_devlink_port_to_dyn(port);
> >+
> >+	if (dyn_port->attached) {
> >+		NL_SET_ERR_MSG_MOD(extack,
> >+				   "Ethernet address can be change only in detached state");
> >+		return -EBUSY;
> >+	}
> >+
> >+	if (hw_addr_len != ETH_ALEN || !is_valid_ether_addr(hw_addr)) {
> >+		NL_SET_ERR_MSG_MOD(extack, "Invalid ethernet address");
> >+		return -EADDRNOTAVAIL;
> >+	}
> >+
> >+	ether_addr_copy(dyn_port->hw_addr, hw_addr);
> >+
> >+	return 0;
> >+}
> >+
> >+/**
> >+ * ice_devlink_port_fn_hw_addr_get - devlink handler for mac address get
> >+ * @port: pointer to devlink port
> >+ * @hw_addr: hw address to set
> >+ * @hw_addr_len: hw address length
> >+ * @extack: extack for reporting error messages
> >+ *
> >+ * Returns mac address for the port.
> >+ *
> >+ * Return: zero on success or an error code on failure.
> >+ */
> >+static int
> >+ice_devlink_port_fn_hw_addr_get(struct devlink_port *port, u8 *hw_addr,
> >+				int *hw_addr_len,
> >+				struct netlink_ext_ack *extack)
> >+{
> >+	struct ice_dynamic_port *dyn_port;
> >+
> >+	dyn_port = ice_devlink_port_to_dyn(port);
> >+
> >+	ether_addr_copy(hw_addr, dyn_port->hw_addr);
> >+	*hw_addr_len = ETH_ALEN;
> >+
> >+	return 0;
> >+}
> >+
> >+/**
> >+ * ice_devlink_port_fn_state_set - devlink handler for port state set
> >+ * @port: pointer to devlink port
> >+ * @state: state to set
> >+ * @extack: extack for reporting error messages
> >+ *
> >+ * Activates or deactivates the port.
> >+ *
> >+ * Return: zero on success or an error code on failure.
> >+ */
> >+static int
> >+ice_devlink_port_fn_state_set(struct devlink_port *port,
> >+			      enum devlink_port_fn_state state,
> >+			      struct netlink_ext_ack *extack)
> >+{
> >+	struct ice_dynamic_port *dyn_port;
> >+
> >+	dyn_port = ice_devlink_port_to_dyn(port);
> >+
> >+	switch (state) {
> >+	case DEVLINK_PORT_FN_STATE_ACTIVE:
> >+		if (!dyn_port->active)
> >+			return ice_activate_dynamic_port(dyn_port, extack);
> >+		break;
> >+	case DEVLINK_PORT_FN_STATE_INACTIVE:
> >+		if (dyn_port->active)
> >+			ice_deactivate_dynamic_port(dyn_port);
> >+		break;
> >+	}
> >+
> >+	return 0;
> >+}
> >+
> >+/**
> >+ * ice_devlink_port_fn_state_get - devlink handler for port state get
> >+ * @port: pointer to devlink port
> >+ * @state: admin configured state of the port
> >+ * @opstate: current port operational state
> >+ * @extack: extack for reporting error messages
> >+ *
> >+ * Gets port state.
> >+ *
> >+ * Return: zero on success or an error code on failure.
> >+ */
> >+static int
> >+ice_devlink_port_fn_state_get(struct devlink_port *port,
> >+			      enum devlink_port_fn_state *state,
> >+			      enum devlink_port_fn_opstate *opstate,
> >+			      struct netlink_ext_ack *extack)
> >+{
> >+	struct ice_dynamic_port *dyn_port;
> >+
> >+	dyn_port = ice_devlink_port_to_dyn(port);
> >+
> >+	if (dyn_port->active)
> >+		*state = DEVLINK_PORT_FN_STATE_ACTIVE;
> >+	else
> >+		*state = DEVLINK_PORT_FN_STATE_INACTIVE;
> >+
> >+	if (dyn_port->attached)
> >+		*opstate = DEVLINK_PORT_FN_OPSTATE_ATTACHED;
> >+	else
> >+		*opstate = DEVLINK_PORT_FN_OPSTATE_DETACHED;
> >+
> >+	return 0;
> >+}
> >+
> > static const struct devlink_port_ops ice_devlink_port_sf_ops = {
> > 	.port_del = ice_devlink_port_del,
> >+	.port_fn_hw_addr_get = ice_devlink_port_fn_hw_addr_get,
> >+	.port_fn_hw_addr_set = ice_devlink_port_fn_hw_addr_set,
> >+	.port_fn_state_get = ice_devlink_port_fn_state_get,
> >+	.port_fn_state_set = ice_devlink_port_fn_state_set,
> > };
> > 
> > /**
> >diff --git a/drivers/net/ethernet/intel/ice/devlink/devlink_port.h b/drivers/net/ethernet/intel/ice/devlink/devlink_port.h
> >index 479d2b976745..d60efc340945 100644
> >--- a/drivers/net/ethernet/intel/ice/devlink/devlink_port.h
> >+++ b/drivers/net/ethernet/intel/ice/devlink/devlink_port.h
> >@@ -11,22 +11,29 @@
> >  * struct ice_dynamic_port - Track dynamically added devlink port instance
> >  * @hw_addr: the HW address for this port
> >  * @active: true if the port has been activated
> >+ * @attached: true it the prot is attached
> >  * @devlink_port: the associated devlink port structure
> >  * @pf: pointer to the PF private structure
> >  * @vsi: the VSI associated with this port
> >  * @repr_id: the representor ID
> >  * @sfnum: the subfunction ID
> >+ * @sf_dev: pointer to the subfunction device
> >  *
> >  * An instance of a dynamically added devlink port. Each port flavour
> >  */
> > struct ice_dynamic_port {
> > 	u8 hw_addr[ETH_ALEN];
> > 	u8 active: 1;
> >+	u8 attached: 1;
> > 	struct devlink_port devlink_port;
> > 	struct ice_pf *pf;
> > 	struct ice_vsi *vsi;
> > 	unsigned long repr_id;
> > 	u32 sfnum;
> >+	/* Flavour-specific implementation data */
> >+	union {
> >+		struct ice_sf_dev *sf_dev;
> >+	};
> > };
> > 
> > void ice_dealloc_all_dynamic_ports(struct ice_pf *pf);
> >diff --git a/drivers/net/ethernet/intel/ice/ice_sf_eth.c b/drivers/net/ethernet/intel/ice/ice_sf_eth.c
> >index c901c07da1d4..abd74f30dabc 100644
> >--- a/drivers/net/ethernet/intel/ice/ice_sf_eth.c
> >+++ b/drivers/net/ethernet/intel/ice/ice_sf_eth.c
> >@@ -149,6 +149,7 @@ static int ice_sf_dev_probe(struct auxiliary_device *adev,
> > 	devl_unlock(devlink);
> > 
> > 	devlink_register(devlink);
> >+	dyn_port->attached = true;
> > 
> > 	return 0;
> > 
> >@@ -188,6 +189,8 @@ static void ice_sf_dev_remove(struct auxiliary_device *adev)
> > 	devl_unlock(devlink);
> > 	devlink_free(devlink);
> > 	ice_vsi_decfg(vsi);
> >+
> >+	dyn_port->attached = false;
> > }
> > 
> > static const struct auxiliary_device_id ice_sf_dev_id_table[] = {
> >@@ -204,6 +207,8 @@ static struct auxiliary_driver ice_sf_driver = {
> > 	.id_table = ice_sf_dev_id_table
> > };
> > 
> >+static DEFINE_XARRAY_ALLOC1(ice_sf_aux_id);
> >+
> > /**
> >  * ice_sf_driver_register - Register new auxiliary subfunction driver
> >  *
> >@@ -222,3 +227,105 @@ void ice_sf_driver_unregister(void)
> > {
> > 	auxiliary_driver_unregister(&ice_sf_driver);
> > }
> >+
> >+/**
> >+ * ice_sf_dev_release - Release device associated with auxiliary device
> >+ * @device: pointer to the device
> >+ *
> >+ * Since most of the code for subfunction deactivation is handled in
> >+ * the remove handler, here just free tracking resources.
> >+ */
> >+static void ice_sf_dev_release(struct device *device)
> >+{
> >+	struct auxiliary_device *adev = to_auxiliary_dev(device);
> >+	struct ice_sf_dev *sf_dev = ice_adev_to_sf_dev(adev);
> >+
> >+	xa_erase(&ice_sf_aux_id, adev->id);
> >+	kfree(sf_dev);
> >+}
> >+
> >+/**
> >+ * ice_sf_eth_activate - Activate Ethernet subfunction port
> >+ * @dyn_port: the dynamic port instance for this subfunction
> >+ * @extack: extack for reporting error messages
> >+ *
> >+ * Activate the dynamic port as an Ethernet subfunction. Setup the netdev
> >+ * resources associated and initialize the auxiliary device.
> >+ *
> >+ * Return: zero on success or an error code on failure.
> >+ */
> >+int
> >+ice_sf_eth_activate(struct ice_dynamic_port *dyn_port,
> >+		    struct netlink_ext_ack *extack)
> >+{
> >+	struct ice_pf *pf = dyn_port->pf;
> >+	struct ice_sf_dev *sf_dev;
> >+	struct pci_dev *pdev;
> >+	int err;
> >+	u32 id;
> >+
> >+	err = xa_alloc(&ice_sf_aux_id, &id, NULL, xa_limit_32b,
> >+		       GFP_KERNEL);
> >+	if (err) {
> >+		NL_SET_ERR_MSG_MOD(extack, "Could not allocate subfunction ID");
> >+		return err;
> >+	}
> >+
> >+	sf_dev = kzalloc(sizeof(*sf_dev), GFP_KERNEL);
> >+	if (!sf_dev) {
> >+		err = -ENOMEM;
> >+		NL_SET_ERR_MSG_MOD(extack, "Could not allocate sf_dev memory");
> >+		goto xa_erase;
> >+	}
> >+	pdev = pf->pdev;
> >+
> >+	sf_dev->dyn_port = dyn_port;
> >+	sf_dev->adev.id = id;
> >+	sf_dev->adev.name = "sf";
> >+	sf_dev->adev.dev.release = ice_sf_dev_release;
> >+	sf_dev->adev.dev.parent = &pdev->dev;
> >+
> >+	err = auxiliary_device_init(&sf_dev->adev);
> >+	if (err) {
> >+		NL_SET_ERR_MSG_MOD(extack, "Failed to initialize auxiliary device");
> >+		goto sf_dev_free;
> >+	}
> >+
> >+	err = auxiliary_device_add(&sf_dev->adev);
> >+	if (err) {
> >+		NL_SET_ERR_MSG_MOD(extack, "Failed to add SF aux device");
> 
> 		NL_SET_ERR_MSG_MOD(extack, "Could not allocate subfunction ID");
> 		NL_SET_ERR_MSG_MOD(extack, "Could not allocate sf_dev memory");
> 		NL_SET_ERR_MSG_MOD(extack, "Failed to initialize auxiliary device");
> 
> Could you make the messages somehow consistent in terminology?

Ok
> 
> 
> >+		goto aux_dev_uninit;
> >+	}
> >+
> >+	dyn_port->sf_dev = sf_dev;
> >+
> >+	return 0;
> >+
> >+aux_dev_uninit:
> >+	auxiliary_device_uninit(&sf_dev->adev);
> >+sf_dev_free:
> >+	kfree(sf_dev);
> >+xa_erase:
> >+	xa_erase(&ice_sf_aux_id, id);
> >+
> >+	return err;
> >+}
> >+
> >+/**
> >+ * ice_sf_eth_deactivate - Deactivate Ethernet subfunction port
> >+ * @dyn_port: the dynamic port instance for this subfunction
> >+ *
> >+ * Deactivate the Ethernet subfunction, removing its auxiliary device and the
> >+ * associated resources.
> >+ */
> >+void ice_sf_eth_deactivate(struct ice_dynamic_port *dyn_port)
> >+{
> >+	struct ice_sf_dev *sf_dev = dyn_port->sf_dev;
> >+
> >+	if (sf_dev) {
> 
> How exactly sf_dev could be NULL here?
> 
> 
> >+		auxiliary_device_delete(&sf_dev->adev);
> >+		auxiliary_device_uninit(&sf_dev->adev);
> >+	}
> >+
> >+	dyn_port->sf_dev = NULL;
> 
> Why you need this set?
> 
> Looks like you are somehow making this partially redundant with "active"
> flag. Could you use either sf_dev null as indication or "active" flag?
> 
Ok, will change that.

> 
> 
> >+}
> >diff --git a/drivers/net/ethernet/intel/ice/ice_sf_eth.h b/drivers/net/ethernet/intel/ice/ice_sf_eth.h
> >index e972c50f96c9..c558cad0a183 100644
> >--- a/drivers/net/ethernet/intel/ice/ice_sf_eth.h
> >+++ b/drivers/net/ethernet/intel/ice/ice_sf_eth.h
> >@@ -27,4 +27,7 @@ ice_sf_dev *ice_adev_to_sf_dev(struct auxiliary_device *adev)
> > int ice_sf_driver_register(void);
> > void ice_sf_driver_unregister(void);
> > 
> >+int ice_sf_eth_activate(struct ice_dynamic_port *dyn_port,
> >+			struct netlink_ext_ack *extack);
> >+void ice_sf_eth_deactivate(struct ice_dynamic_port *dyn_port);
> > #endif /* _ICE_SF_ETH_H_ */
> >-- 
> >2.42.0
> >
> >

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ